BS ISO 13951:2015
|
Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading |
I.S. EN 13244-5:2002
|
PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - FITNESS FOR PURPOSE OF THE SYSTEM |
BS ISO 21751:2011
|
Plastics pipes and fittings. Decohesion test of electrofusion assemblies. Strip-bend test |
UNI/TR 11481 : 2013
|
Usi del polietilene nelle linee dirette e nella distribuzione del gas combustibile - Tecnologie riconosciute e applicabili - Linee guida di orientamento per gli operatori |
BS ISO 8085-3:2001
|
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
10/30212153 DC : 0
|
BS EN 12201-5 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
05/30132152 DC : DRAFT APR 2005
|
ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
EN 1555-1:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
UNI EN 1555-1 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
NF EN 1555-1 : 2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
DIN EN 12201-5:2011-11
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
DIN EN 12007-2:2012-10
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
DIN EN 12201-1:2011-11
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
BS EN 1555-5:2010
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness for purpose of the system |
BS EN 1555-1:2010
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
EN 12201-1:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
EN 12201-5:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
DIN EN 13244-5:2003-04
|
PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
EN 12007-2:2012
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
EN 13244-5:2002
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
I.S. EN ISO 1167-4:2007
|
THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
09/30180076 DC : 0
|
BS ISO 21751 - PLASTICS PIPES AND FITTINGS - DETERMINATION OF COHESIVE RESISTANCE - STRIP-BEND TEST FOR ELECTROFUSION ASSEMBLIES |
BS ISO 13956:2010
|
Plastics pipes and fittings. Decohesion test of polyethylene (PE) saddle fusion joints. Evaluation of ductility of fusion joint interface by tear test |
09/30180073 DC : 0
|
BS ISO 13956 - PLASTICS PIPES AND FITTINGS - DETERMINATION OF COHESIVE RESISTANCE - TEAR TEST FOR POLYETHYLENE (PE) SADDLE ASSEMBLIES |
ISO 21751:2011
|
Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test |
ISO 4437-1:2014
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General |
UNI 10521 : 2012
|
WELDING OF PLASTIC MATERIALS - ELECTRO-FUSION WELDING - WELDING OF POLYETHYLENE PIPES AND/OR FITTINGS FOR GAS, WATER AND OTHERS PRESSURE FLUIDS PIPELINES |
UNI EN 1555-5 : 2011
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
DIN EN 1555-5:2010-12
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
UNE-EN 1555-5:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
UNE-EN 12201-5:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
I.S. EN 12201-5:2011
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
I.S. EN 12201-1:2011
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
I.S. EN 1555-1:2010-2015
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
I.S. EN 12007-2:2012
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
I.S. EN 1555-5:2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
ISO 13951:2015
|
Plastics piping systems Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading |
01/123802 DC : DRAFT OCT 2001
|
BS ISO 14531-2 - PLASTICS PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE TRANSPORT OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 2: FITTINGS FOR HEAT FUSION JOINTING |
12/30256736 DC : 0
|
BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
04/30107711 DC : DRAFT JAN 2004
|
ISO/DIS 14531-3 - PLASTIC PIPES AND FITTINGS - CROSSLINKED POLYETHYLENE (PE-X) PIPE SYSTEMS FOR THE CONVEYANCE OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS - PART 3: FITTINGS FOR MECHANICAL JOINTING (INCLUDING PE-X/METAL TRANSITIONS) |
UNI EN ISO 1167-4 : 2008
|
THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
BS ISO 4437:2007
|
Buried polyethylene (PE) pipes for the supply of gaseous fuels. Metric series. Specifications |
BS ISO 4437-1:2014
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General |
EN 1555-5:2010
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 5: Fitness for purpose of the system |
ISO 4437:2007
|
Buried polyethylene (PE) pipes for the supply of gaseous fuels Metric series Specifications |
UNI 10761 : 2012
|
COORDINATION OF WELDING, PIPE LAYING AND TEST ACTIVITIES FOR POLYETHYLENE TRANSMISSION LINES OF GASEOUS FUELS, WATER AND OTHER FLUIDS UNDER PRESSURE - TASKS AND RESPONSIBILITIES, REQUIREMENTS FOR TRAINING, QUALIFICATION AND CERTIFICATION OF PERSONNEL |
ISO 13956:2010
|
Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test |
ISO 4437-5:2014
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 5: Fitness for purpose of the system |
ISO/TS 10839:2000
|
Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
NF EN 1555-5 : 2010
|
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
DIN EN 1555-1:2010-12
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
BS EN 12201-1:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General |
BS EN 12007-2:2012
|
Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
UNE-EN 12007-2:2013
|
Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
UNI EN 12007-2 : 2012
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
UNI EN 12201-1 : 2012
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
UNI EN 12201-5 : 2012
|
PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
ISO 14531-2:2004
|
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 2: Fittings for heat-fusion jointing |
10/30212144 DC : 0
|
BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL |
BS ISO 4437-5:2014
|
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness for purpose of the system |
10/30208795 DC : 0
|
BS EN 12007-2 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
PREN 12007-2 : DRAFT 2010
|
GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL RECOMMENDATIONS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
12/30256675 DC : 0
|
BS ISO 4437-5 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE |
ISO 13955:1997
|
Plastics pipes and fittings Crushing decohesion test for polyethylene (PE) electrofusion assemblies |
ISO 13954:1997
|
Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
ISO 8085-3:2001
|
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels Metric series Specifications Part 3: Electrofusion fittings |
UNE-EN 1555-1:2011
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies |
BS EN 12201-5:2011
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) Fitness for purpose of the system |
BS EN 13244-5:2002
|
Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) Fitness for purpose of the system |
EN ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007) |
EN 1680:1997
|
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanisms |
BS ISO 14531-2:2004
|
Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications Fittings for heat-fusion jointing |
ISO 21004:2006
|
Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
UNI/TS 11508 : 2013
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR THERMOPLASTIC MATERIALS - WELDING PROCEDURE SPECIFICATION (WPS) FOR ELECTROFUSION WELDING AND HEATED TOOL BUTT WELDING |
ISO/TS 18226:2006
|
Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
ISO 4427-5:2007
|
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 5: Fitness for purpose of the system |
DIN EN ISO 1167-4:2008-02
|
THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
UNE-EN 12201-1:2012
|
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
BS EN ISO 1167-4 : 2008
|
THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |