ISO 12215-3:2002
Current
Current
The latest, up-to-date edition.
Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
30-05-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This part of ISO 12215 specifies requirements for materials intended for use in the construction of the hull, superstructure and appendages, in particular:
- weldable normal and higher strength hot-rolled steel plates, wide flats, sections and bars;
- austenitic stainless steels, fabricated in the form of plates or profiles;
- wrought aluminium alloys fabricated as plates, sections and extruded profiles;
- wood in the form of solid timber, plywood or veneer;
- other suitable materials.
This part of ISO 12215 applies to small craft with a hull length (LH) according to ISO 8666 of up to 24 m.
| DevelopmentNote |
Supersedes ISO/FDIS 12215-3 (06/2002) Also numbered as BIS IS 16183-3. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 12215-3:2019-07 | Identical |
| JIS F 1034-3:2006 | Identical |
| NEN EN ISO 12215-3 : 2002 | Identical |
| BS EN ISO 12215-3:2002 | Identical |
| NF EN ISO 12215-3:2018 | Identical |
| EN ISO 12215-3:2018 | Identical |
| I.S. EN ISO 12215-3:2018 | Identical |
| PN EN ISO 12215-3 : 2005 | Identical |
| DIN EN ISO 12215-3:2002-09 | Identical |
| SN EN ISO 12215-3 : 2002 | Identical |
| UNI EN ISO 12215-3 : 2003 | Identical |
| SAC GB/T 19314.3-2019 | Identical |
| SN EN ISO 12215-3:2019 | Identical |
| UNE-EN ISO 12215-3:2003 | Identical |
| EN ISO 12215-3:2002 | Identical |
| ÖNORM EN ISO 12215-3: 2019 | Identical |
| ONORM EN ISO 12215-3 : 2002 | Identical |
| I.S. EN ISO 12215-3:2002 | Identical |
| UNE-EN ISO 12215-3:2019 | Identical |
| BS EN ISO 12215-3:2018 | Identical |
| NS EN ISO 12215-3 : 1ED 2002 | Identical |
| PN-EN ISO 12215-3: 2018 | Identical |
| UNE-EN ISO 6185-4:2012 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| 13/30229200 DC : 0 | BS EN ISO 6185-3 - INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER |
| EN ISO 12215-6:2008 | Small craft - Hull construction and scantlings - Part 6: Structural arrangements and details (ISO 12215-6:2008) |
| UNE-EN ISO 6185-3:2015 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| UNE-EN ISO 12215-9:2013 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| DIN EN ISO 6185-4:2011-10 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| DIN EN ISO 6185-3:2014-12 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| UNI EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| BS EN ISO 12215-4:2002 | Small craft. Hull construction and scantlings Workshop and manufacturing |
| I.S. EN ISO 6185-4:2011 | INFLATABLE BOATS - PART 4: BOATS WITH A HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER (ISO 6185-4:2011, CORRECTED VERSION 2014-08-01) |
| PREN ISO 6185-3 : DRAFT 2013 | INFLATABLE BOATS - PART 3: BOATS WITH A MAXIMUM MOTOR POWER RATING OF 15 KW AND GREATER (ISO/DIS 6185-3:2013) |
| I.S. EN ISO 12215-9:2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| ISO 6185-3:2014 | Inflatable boats — Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| DIN EN ISO 12215-6:2008-07 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| UNI EN ISO 12215-9 : 2012 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES |
| I.S. EN ISO 12215-4:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 4: WORKSHOP AND MANUFACTURING |
| DIN EN ISO 12215-4:2002-09 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - WORKSHOPS AND MANUFACTURING |
| DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| NF EN ISO 6185-4 : 2011 | INFLATABLE BOATS - PART 4: BOATS WITH AN HULL LENGTH OF BETWEEN 8 M AND 24 M WITH A MOTOR POWER RATING OF 15 KW AND GREATER |
| UNI EN ISO 12215-6 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 12215-9:2012 | Small craft Hull construction and scantlings Part 9: Sailing craft appendages |
| BS EN ISO 6185-4:2011 | Inflatable boats Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| ONORM EN ISO 12215-9 : 2013 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| EN ISO 12215-4:2002 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| 00/717312 DC : 0 | PREN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES, DESIGN STRESSES, SCANTLING DETERMINATION |
| 00/715272 DC : 0 | ISO/DIS 12215-6 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 12215-6:2008 | Small craft — Hull construction and scantlings — Part 6: Structural arrangements and details |
| ISO 12215-4:2002 | Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing |
| BS EN ISO 6185-3:2014 | Inflatable boats Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
| ONORM EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| EN ISO 12215-9:2012 | Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012) |
| I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
| UNI EN ISO 6185-3 : 2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER |
| DIN EN ISO 12215-9:2013-01 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012) |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| I.S. EN ISO 6185-3:2014 | INFLATABLE BOATS - PART 3: BOATS WITH A HULL LENGTH LESS THAN 8 M WITH A MOTOR RATING OF 15 KW AND GREATER (ISO 6185-3:2014) |
| BS EN ISO 12215-9:2012 | Small craft. Hull construction and scantlings Sailing craft appendages |
| EN ISO 6185-3:2014 | Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) |
| EN ISO 6185-4:2011 | Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected version 2014-08-01) |
| ISO 6185-4:2011 | Inflatable boats Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater |
| I.S. EN ISO 12215-6:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 6: STRUCTURAL ARRANGEMENTS AND DETAILS |
| ISO 209-1:1989 | Wrought aluminium and aluminium alloys Chemical composition and forms of products Part 1: Chemical composition |
| ISO 3348:1975 | Wood — Determination of impact bending strength |
| ISO 2300:1973 | Sawn timber of broadleaved species Defects Terms and definitions |
| ISO 6362-2:2014 | Wrought aluminium and aluminium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties |
| ISO 8905:1988 | Sawn timber — Test methods — Determination of ultimate strength in shearing parallel to grain |
| ISO 2299:1973 | Sawn timber of broadleaved species — Defects — Classification |
| 1994/25/EC : 1994 | DIRECTIVE 94/25/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 JUNE 1994 ON THE APPROXIMATION OF THE LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO RECREATIONAL CRAFT |
| ISO 8666:2016 | Small craft Principal data |
| ISO 3130:1975 | Wood — Determination of moisture content for physical and mechanical tests |
| ISO 1031:1974 | Coniferous sawn timber — Defects — Terms and definitions |
| ISO 4476:1983 | Coniferous and broadleaved sawlogs — Sizes — Vocabulary |
| ISO 3346:1975 | Wood — Determination of ultimate tensile stress perpendicular to grain |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| ISO 3132:1975 | Wood — Testing in compression perpendicular to grain |
| ISO 2301:1973 | Sawn timber of broadleaved species — Defects — Measurement |
| ISO 8906:1988 | Sawn timber — Test methods — Determination of resistance to local transverse compression |
| ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
| ISO 3133:1975 | Wood — Determination of ultimate strength in static bending |
| ISO 6361-2:2014 | Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 2: Mechanical properties |
| ISO 1098:1975 | Veneer plywood for general use General requirements |
| ISO 12215-4:2002 | Small craft — Hull construction and scantlings — Part 4: Workshop and manufacturing |
| ISO 3347:1976 | Wood — Determination of ultimate shearing stress parallel to grain |
| ISO 3349:1975 | Wood — Determination of modulus of elasticity in static bending |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| EN ISO 12215-4:2002 | Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 12215-4:2002) |
| ISO 3131:1975 | Wood — Determination of density for physical and mechanical tests |
| ISO 1032:1974 | Coniferous sawn timber Sizes Terms and definitions |
| ISO 1029:1974 | Coniferous sawn timber — Defects — Classification |
| ISO 4474:1989 | Coniferous and broadleaved tree sawlogs — Visible defects — Terms and definitions |
| ISO 2074:2007 | Plywood Vocabulary |
| ISO 1096:2014 | Plywood Classification |
| ISO 3129:2012 | Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| ISO 3345:1975 | Wood — Determination of ultimate tensile stress parallel to grain |
| ISO 9086-1:1987 | Wood Methods of physical and mechanical testing Vocabulary Part 1: General concepts and macrostructure |
| ISO 3787:1976 | Wood — Test methods — Determination of ultimate stress in compression parallel to grain |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.