ISO 14486:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Laminate floor coverings — Specification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
04-06-2012
Superseded date
20-03-2025
Superseded by
€63.00
Excluding VAT
ISO 14486:2012 specifies the characteristics of laminate floor coverings, supplied in either tile or plank form. To encourage the consumer to make an informed choice, the standard includes a classification system (see ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.
| Committee |
ISO/TC 219
|
| DevelopmentNote |
Supersedes ISO/DIS 14486. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| UnderRevision |
| Standards | Relationship |
| NEN ISO 14486 : 2012 | Identical |
| BS ISO 14486:2012 | Identical |
| I.S. EN 16511:2014 | LOOSE-LAID PANELS - SEMI-RIGID MULTILAYER MODULAR FLOOR COVERING (MMF) PANELS WITH WEAR RESISTANT TOP LAYER |
| EN 16511:2014 | Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer |
| BS EN 16511:2014 | Loose-laid panels. Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer |
| 12/30276863 DC : 0 | BS EN 16511 - LOOSE-LAID PANELS - MULTI-LAYER SEMI-RIGID FLOOR COVERING (MSF) PANELS WITH WEAR RESISTANT TOP LAYER |
| DIN EN 16511:2014-08 | LOOSE-LAID PANELS - SEMI-RIGID MULTILAYER MODULAR FLOOR COVERING (MMF) PANELS WITH WEAR RESISTANT TOP LAYER |
| UNE-EN 16511:2014 | Loose-laid panels - Semi-rigid multilayer modular floor covering (MMF) panels with wear resistant top layer |
| ISO 24337:2006 | Laminate floor coverings — Determination of geometrical characteristics |
| EN 1815:1997 | Resilient and textile floor coverings - Assessment of static electrical propensity |
| ISO 25620:2008 | Laminate floor coverings — Determination of long-side friction for mechanically assembled panels |
| ISO 16984:2003 | Wood-based panels — Determination of tensile strength perpendicular to the plane of the panel |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| ASTM F 925 : 2013 : REDLINE | Standard Test Method for Resistance to Chemicals of Resilient Flooring |
| EN 15468:2016 | Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 11925-2:2010 | Reaction to fire tests — Ignitability of products subjected to direct impingement of flame — Part 2: Single-flame source test |
| ASTM E 284 : 2017 : REDLINE | Standard Terminology of Appearance |
| ISO 24338:2014 | Laminate floor coverings — Determination of abrasion resistance |
| ISO 24335:2006 | Laminate floor coverings — Determination of impact resistance |
| ISO 16981:2003 | Wood-based panels — Determination of surface soundness |
| ISO 24334:2014 | Laminate floor coverings — Determination of locking strength for mechanically assembled panels |
| EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
| ISO 24339:2006 | Laminate and textile floor coverings — Determination of dimensional variations after exposure to humid and dry climate conditions |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 24343-1:2007 | Resilient and laminate floor coverings — Determination of indentation and residual indentation — Part 1: Residual indentation |
| ASTM E 1333 : 2014 : REDLINE | Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| ASTM E 413 : 2016 : REDLINE | Classification for Rating Sound Insulation |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 105-A02:1993 | Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour |
| EN 14978:2016 | Laminate floor coverings - Elements with acrylic based surface layer, electron beam cured - Specifications, requirements and test methods |
| ISO 9239-1:2010 | Reaction to fire tests for floorings — Part 1: Determination of the burning behaviour using a radiant heat source |
| ISO 4918:2016 | Resilient, textile and laminate floor coverings — Castor chair test |
| ISO 10874:2009 | Resilient, textile and laminate floor coverings — Classification |
| ISO 24336:2005 | Laminate floor coverings — Determination of thickness swelling after partial immersion in water |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.