• Shopping Cart
    There are no items in your cart

ISO 14635-1:2000

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils

Available format(s)

PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy

Superseded date

06-07-2023

Superseded by

ISO 14635-1:2023

Language(s)

English, French

Published date

08-06-2000

€60.00
Excluding VAT

This part of ISO 14635 specifies a test method based on an FZG2_ four-square test machine to determine the

relative load-carrying capacity of lubricating oils defined by the gear-surface damage known as scuffing. High

surface temperatures due to high surface pressures and sliding velocities can initiate the breakdown of the

lubricant films. This test method can be used to assess such lubricant breakdown under defined conditions of

temperature, high sliding velocity and stepwise increased load.

NOTE This method is technically equivalent to ASTM D 5182-97, DIN 51354-1 and DIN 51354-2, IP 334/90 and

CEC L-07-A-95.

Committee
ISO/TC 60/SC 2
DocumentType
Standard
Pages
17
ProductNote
THIS STANDARD ALSO REFERS-IP 334/90,CEC L-07-A-95
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy

Standards Relationship
PN ISO 14635-1 : 2015 Identical
BS ISO 14635-1:2000 Identical
DIN 51354-2:1990-04 Identical
DIN ISO 14635-1:2006-05 Identical
DIN 51354-2:1990-04 Corresponds

DIN ISO 14635-3:2011-08 Gears - FZG test procedures - Part 3: FZG test method A/2,8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases (ISO 14635-3:2005)
BS EN 61400-4:2013 Wind turbines Design requirements for wind turbine gea
DIN ISO 14635-2:2010-01 Gears - FZG test procedures - Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils (ISO 14635-2:2004)
EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
05/30098184 DC : DRAFT MAY 2005 ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
08/30178054 DC : DRAFT FEB 2008 BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
ISO/TS 6336-20:2017 Calculation of load capacity of spur and helical gears Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) Flash temperature method
DIN EN ISO 12922:2013-04 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
I.S. EN 61400-4:2013 WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV))
BS ISO 11158:2009 Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG
04/30112988 DC : DRAFT APR 2004 ISO 14635-3 - GEARS - FZG TEST PROCEDURES - FZG TEST METHOD A/2.8/50 FOR RELATIVE SCUFFING LOAD-CARRYING CAPACITY AND WEAR CHARACTERISTICS OF SEMIFLUID GEAR GREASES
17/30341515 DC : 0 BS ISO 12925-1 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY C (GEARS) - PART 1: SPECIFICATIONS FOR LUBRICANTS FOR ENCLOSED GEAR SYSTEMS
BS ISO 14635-3:2005 Gears. FZG test procedures FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
BS ISO/TR 13989-1:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Flash temperature method
ISO 12925-1:2018 Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems
UNI EN ISO 12922 : 2013 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
BS ISO 8068:2006 Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
PD ISO/TR 18792:2008 Lubrication of industrial gear drives
ISO 11158:2009 Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG
UNE-EN ISO 12922:2013 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
BS EN ISO 13691:2002 Petroleum and natural gas industries. High-speed special-purpose gear units
ISO 14635-2:2004 Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils
ISO 14635-3:2005 Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases
UNE-EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes
I.S. EN ISO 12922:2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
ISO 13691:2001 Petroleum and natural gas industries — High-speed special-purpose gear units
EN ISO 13691:2002 Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001)
11/30210938 DC : 0 BS EN 61400-4 - WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES
15/30310648 DC : 0 BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR
BS ISO 15380:2016 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
NF ISO 8068 : 2006 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
ISO 15380:2016 Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS ISO 13691 : 2001 AMD 14307 PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS
EN 61400-4:2013 Wind turbines - Part 4: Design requirements for wind turbine gearboxes

ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 1328-1:2013 Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 4964:1984 Steel Hardness conversions

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.