ISO 15031-3:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 3: Diagnostic connector and related electrical circuits: Specification and use
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
06-02-2023
Superseded by
Language(s)
English
Published date
06-04-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 15031-3:2016 references the latest publication of SAE J1962.
On-board diagnostic (OBD) regulations require road vehicles to be equipped with a standardized connector for purposes of access to OBD information by ISO 15031‑4 compliant external test equipment. This part of ISO 15031 describes the requirements for the physical connection and associated pin usage to allow for standard access to the OBD data.
The first edition of this part of ISO 15031 was based on SAE J1962 and was intended to meet European OBD requirements for 2000 and later model year vehicles, and added a modified connector type to accommodate vehicles with a 24 V system. This revised part of ISO 15031 is technically equivalent to SAE J1962 with the exception of the specific requirements identified in the document.
ISO 15031-3:2016 specifies additional requirements related to right hand driven (RHD) vehicles.
Annex A and Annex B are for information and not required to fulfil emissions-related OBD.
| DevelopmentNote |
Supersedes ISO/DIS 15031-3. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS ISO 15031-3 : 2016 | Identical |
| BS ISO 15031-3:2016 | Identical |
| NEN ISO 15031-3 : 2016 | Identical |
| BS ISO 15031-7:2013 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics Data link security |
| BS ISO 14230-1:2012 | Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer |
| BS ISO 26021-3:2009 | Road vehicles. End-of-life activation of on-board pyrotechnic devices Tool requirements |
| 15/30319117 DC : 0 | BS ISO 15765-4 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER CONTROLLER AREA NETWORK (DOCAN) - PART 4: REQUIREMENTS FOR EMISSIONS-RELATED SYSTEMS |
| 00/706378 DC : DRAFT MAR 2000 | ISO/DIS 15031-4 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND TEST EQUIPMENT FOR EMISSION-RELATED DIAGNOSTICS - PART 4: EXTERNAL TEST EQUIPMENT |
| BS ISO 26021-1:2008 | Road vehicles. End-of-life activation of on-board pyrotechnic devices General information and use case definitions |
| 11/30212434 DC : 0 | BS ISO 14230-1 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 1: PHYSICAL LAYER |
| 09/30190385 DC : 0 | BS ISO 15765-4 - ROAD VEHICLES - DIAGNOSTICS ON CONTROLLER AREA NETWORKS (CAN) - PART 4: REQUIREMENTS FOR EMISSIONS-RELATED SYSTEMS |
| ISO 13400-4:2016 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet-based high-speed data link connector |
| 06/30134245 DC : 0 | ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API) |
| EN ISO 18541-2:2014 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| SAE J3005_201412 | Permanently or Semi-Permanently Installed Diagnostic Communication Devices |
| ISO 22900-2:2017 | Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API) |
| UNE-EN ISO 18541-2:2015 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| ISO 26021-3:2009 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 3: Tool requirements |
| ISO 15031-5:2015 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 5: Emissions-related diagnostic services |
| 15/30302729 DC : DRAFT JULY 2015 | BS ISO 13400-4 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER INTERNET PROTOCOL (DOIP) - PART 4: ETHERNET DIAGNOSTIC CONNECTOR |
| ISO 15031-2:2010 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 2: Guidance on terms, definitions, abbreviations and acronyms |
| UNE-ISO 9141-3:2015 | Road vehicles -- Diagnostic systems -- Part 3: Verification of the communication between vehicle and OBD II scan tool |
| 16/30337951 DC : DRAFT APR 2016 | BS ISO 26021-2 - ROAD VEHICLES - END-OF-LIFE ACTIVATION OF ON-BOARD PYROTECHNIC DEVICES - PART 2: COMMUNICATION REQUIREMENTS |
| 07/30159306 DC : 0 | BS ISO 26021-5 - ROAD VEHICLES - END OF LIFE ACTIVATION OF ON-BOARD PYROTECHNIC DEVICES - PART 5: ADDITIONAL COMMUNICATION LINE WITH PULSE WIDTH MODULATED SIGNAL |
| BS ISO 15031-4:2014 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics External test equipment |
| TS 103 412 : 1.2.1 | MOBILE STANDARDS GROUP (MSG); PAN-EUROPEAN ECALL END TO END AND IN-BAND MODEM CONFORMANCE TESTING; PROSE TEST SPECIFICATION |
| DEFSTAN 25-24/1(2004) : 2004 | HEALTH AND USAGE MONITORING CAPABILITY FOR LAND PLATFORMS (HUMS) |
| NF ISO 14230-1 : 2002 | ROAD VEHICLES - DIAGNOSTIC SYSTEMS - KEYWORD PROTOCOL 2000 - PART 1: PHYSICAL LAYER |
| BS ISO 15765-4:2016 | Road vehicles. Diagnostic communication over Controller Area Network (DoCAN) Requirements for emissions-related systems |
| BS ISO 27145-6:2015 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment |
| BS ISO 22900-2:2017 | Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API) |
| BS ISO 15031-1:2010 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics General information and use case definition |
| BS ISO 22900-1:2008 | Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements |
| BS ISO 26021-5:2009 | Road vehicles. End-of-life activation of on-board pyrotechnic devices Additional communication line with pulse width modulated signal |
| 15/30300864 DC : 0 | BS ISO 19689 - MOTORCYCLES AND MOPEDS - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR DIAGNOSTICS - DIAGNOSTIC CONNECTOR AND RELATED ELECTRICAL CIRCUITS, SPECIFICATION AND USE |
| ISO 19689:2016 | Motorcycles and mopeds Communication between vehicle and external equipment for diagnostics Diagnostic connector and related electrical circuits, specification and use |
| 14/30301555 DC : 0 | BS ISO 15031-5 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 5: EMISSIONS-RELATED DIAGNOSTIC SERVICES |
| BS ISO 26021-2:2008 | Road vehicles. End of-life activation of on-board pyrotechnic devices Communication requirements |
| 09/30185274 DC : 0 | BS ISO 15031-6 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 6: DIAGNOSTIC TROUBLE CODE DEFINITIONS |
| ISO 15764:2004 | Road vehicles Extended data link security |
| SAE J3138_201806 | Diagnostic Link Connector Security |
| SAE J1962_201607 | Diagnostic Connector |
| ISO 15031-7:2013 | Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security |
| ISO 26021-5:2009 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 5: Additional communication line with pulse width modulated signal |
| ISO 22900-1:2008 | Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements |
| 07/30159233 DC : 0 | BS ISO 26021-3 - ROAD VEHICLES - END OF LIFE ACTIVATION OF ON-BOARD PYROTECHNIC DEVICES - PART 3: TOOL REQUIREMENTS |
| 11/30227758 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
| DIN EN ISO 18541-2:2016-04 | Road vehicles - Standardized access to automotive repair and maintenance information (RMI) - Part 2: Technical requirements (ISO 18541-2:2014) |
| 10/30212364 DC : 0 | BS ISO 13400-3 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER INTERNET PROTOCOL (DOIP) - PART 3: IEEE802.3 BASED WIRED VEHICLE INTERFACE |
| ISO/PAS 27145-4:2006 | Road vehicles Implementation of WWH-OBD communication requirements Part 4: Connection between vehicle and test equipment |
| 07/30134250 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
| BS ISO 15031-5:2015 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics Emissions-related diagnostic services |
| 09/30182918 DC : 0 | BS ISO 15031-2 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSION-RELATED DIAGNOSTICS - PART 2: TERMS, DEFINITIONS, ABBREVIATIONS AND ACRONYMS |
| BS ISO 19689:2016 | Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use |
| 14/30291315 DC : 0 | BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API) |
| 07/30159303 DC : 0 | BS ISO 26021-4 - ROAD VEHICLES - END OF LIFE ACTIVATION OF ON-BOARD PYROTECHNIC DEVICES - PART 4: ADDITIONAL COMMUNICATION LINE WITH BIDIRECTIONAL COMMUNICATION |
| 07/30149293 DC : 0 | BS ISO 26021-1 - ROAD VEHICLES - END OF LIFE ACTIVATION OF ON-BOARD PYROTECHNIC DEVICES - PART 1: GENERAL INFORMATION AND USE CASE DEFINITION |
| DD ISO/PAS 27145-4:2006 | Road vehicles. Implementation of WWH-OBD communication requirements Connection between vehicle and test equipment |
| SAE J1699/3_201707 | Vehicle OBD II Compliance Test Cases |
| I.S. EN ISO 18541-2:2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 2: TECHNICAL REQUIREMENTS (ISO 18541-2:2014) |
| ISO 14230-1:2012 | Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer |
| ISO 15031-4:2014 | Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment |
| ISO 26021-4:2009 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 4: Additional communication line with bidirectional communication |
| ISO 15765-4:2016 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems |
| ISO 26021-2:2008 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 2: Communication requirements |
| ISO 26021-1:2008 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 1: General information and use case definitions |
| ISO 18541-2:2014 | Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements |
| BS ISO 13400-4:2016 | Road vehicles. Diagnostic communication over Internet Protocol (DoIP) Ethernet-based high-speed data link connector |
| 13/30268103 DC : 0 | BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT |
| ISO 15031-1:2010 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 1: General information and use case definition |
| 11/30219766 DC : 0 | BS ISO 15031-4 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 4: EXTERNAL TEST EQUIPMENT |
| BS ISO 26021-4:2009 | Road vehicles. End-of-life activation of on-board pyrotechnic devices Additional communication line with bidirectional communication |
| SAE J1939/3_200812 | On Board Diagnostics Implementation Guide |
| BS EN ISO 18541-2:2014 | Road vehicles. Standardized access to automotive repair and maintenance information (RMI) Technical requirements |
| BS ISO 15031-2:2010 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics Guidance on terms, definitions, abbreviations and acronyms |
| SAE J1979_201702 | E/E Diagnostic Test Modes |
| UNE-ISO 14230-1:2015 | Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer. |
| UNI EN ISO 18541-2 : 2014 | ROAD VEHICLES - STANDARDIZED ACCESS TO AUTOMOTIVE REPAIR AND MAINTENANCE INFORMATION (RMI) - PART 2: TECHNICAL REQUIREMENTS |
| ISO 27145-6:2015 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment |
| ISO 15765-4:2016 | Road vehicles Diagnostic communication over Controller Area Network (DoCAN) Part 4: Requirements for emissions-related systems |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| ISO 13400-4:2016 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 4: Ethernet-based high-speed data link connector |
| ISO 15031-1:2010 | Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 1: General information and use case definition |
| ISO 15031-4:2014 | Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment |
| ISO 26021-4:2009 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 4: Additional communication line with bidirectional communication |
| ISO 6722-4:1993 | Road vehicles Unscreened low-tension cables Part 4: Conductor sizes and dimensions for thin-wall insulated cables |
| SAE J1962_201607 | Diagnostic Connector |
| ISO 14230-4:2000 | Road vehicles Diagnostic systems Keyword Protocol 2000 Part 4: Requirements for emission-related systems |
| ISO 6722-3:1993 | Road vehicles Unscreened low-tension cables Part 3: Conductor sizes and dimensions for thick-wall insulated cables |
| ISO 13400-3:2016 | Road vehicles Diagnostic communication over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 |
| ISO 26021-5:2009 | Road vehicles End-of-life activation of on-board pyrotechnic devices Part 5: Additional communication line with pulse width modulated signal |
| SAE J1850_201510 | Class B Data Communications Network Interface |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.