ISO/TR 834-3:2012
|
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
ISO 6182-7:2004
|
Fire protection Automatic sprinkler systems Part 7: Requirements and test methods for early suppression fast response (ESFR) sprinklers |
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
ISO 7240-15:2014
|
Fire detection and alarm systems Part 15: Point-type fire detectors using smoke and heat sensors |
ISO 834-7:2000
|
Fire-resistance tests — Elements of building construction — Part 7: Specific requirements for columns |
ISO 6182-4:1993
|
Fire protection Automatic sprinkler systems Part 4: Requirements and test methods for quick-opening devices |
ISO 6707-1:2017
|
Buildings and civil engineering works Vocabulary Part 1: General terms |
ISO/TS 5660-3:2012
|
Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
ISO 13344:2015
|
Estimation of the lethal toxic potency of fire effluents |
ISO 6182-10:2014
|
Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers |
ISO 6183:2009
|
Fire protection equipment Carbon dioxide extinguishing systems for use on premises Design and installation |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
ISO 12468-1:2013
|
External exposure of roofs to fire Part 1: Test method |
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source |
ISO 7165:2017
|
Fire fighting — Portable fire extinguishers — Performance and construction |
ISO 16312-1:2016
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
ISO 834-8:2002
|
Fire-resistance tests Elements of building construction Part 8: Specific requirements for non-loadbearing vertical separating elements |
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
ISO 834-4:2000
|
Fire-resistance tests — Elements of building construction — Part 4: Specific requirements for loadbearing vertical separating elements |
ISO 6182-1:2014
|
Fire protection Automatic sprinkler systems Part 1: Requirements and test methods for sprinklers |
ISO 7240-4:2003
|
Fire detection and alarm systems Part 4: Power supply equipment |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
ISO 13943:2017
|
Fire safety — Vocabulary |
ISO/TR 15656:2003
|
Fire resistance Guidelines for evaluating the predictive capability of calculation models for structural fire behaviour |
ISO 5658-4:2001
|
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
ISO 9705-1:2016
|
Reaction to fire tests Room corner test for wall and ceiling lining products Part 1: Test method for a small room configuration |
ISO 12468-2:2013
|
External exposure of roofs to fire Part 2: Classification of roofs |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
ISO 7240-2:2003
|
Fire detection and alarm systems Part 2: Control and indicating equipment |
ISO 3008:2007
|
Fire-resistance tests Door and shutter assemblies |
ISO/TS 5658-1:2006
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
ISO 15928-2:2015
|
Houses Description of performance Part 2: Structural serviceability |
ISO 12239:2010
|
Smoke alarms using scattered light, transmitted light or ionization |
ISO/TR 9705-2:2001
|
Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance |
ISO 7240-3:2010
|
Fire detection and alarm systems Part 3: Audible alarm devices |
ISO/TR 12470:1998
|
Fire-resistance tests Guidance on the application and extension of results |
ISO 19702:2015
|
Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
ISO 6182-5:2012
|
Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves |
ISO/TR 10158:1991
|
Principles and rationale underlying calculation methods in relation to fire resistance of structural elements |
ISO 11925-3:1997
|
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
ISO/TS 3814:2014
|
Standard tests for measuring reaction-to-fire of products and materials — Their development and application |
ISO/TR 22898:2006
|
Review of outputs for fire containment tests for buildings in the context of fire safety engineering |
ISO 3941:2007
|
Classification of fires |
ISO/TR 13387-4:1999
|
Fire safety engineering Part 4: Initiation and development of fire and generation of fire effluents |
ISO 14696:2009
|
Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
ISO 6182-2:2012
|
Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms |
ISO 7240-14:2013
|
Fire detection and alarm systems — Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings |
ISO/TR 16738:2009
|
Fire-safety engineering Technical information on methods for evaluating behaviour and movement of people |
ISO/TR 17252:2008
|
Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering |
ISO 13571:2012
|
Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires |
ISO/TS 19700:2016
|
Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
ISO 3009:2003
|
Fire-resistance tests Elements of building construction Glazed elements |
ISO 23932:2009
|
Fire safety engineering General principles |
ISO/TR 13387-6:1999
|
Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin |
ISO/TR 15655:2003
|
Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
ISO 7240-5:2012
|
Fire detection and alarm systems Part 5: Point-type heat detectors |
ISO 834-9:2003
|
Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements |
ISO 834-5:2000
|
Fire-resistance tests — Elements of building construction — Part 5: Specific requirements for loadbearing horizontal separating elements |
ISO 19706:2011
|
Guidelines for assessing the fire threat to people |
ISO 19703:2010
|
Generation and analysis of toxic gases in fire Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires |
ISO/TR 16312-2:2007
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
ISO 834-1:1999
|
Fire-resistance tests Elements of building construction Part 1: General requirements |
ISO 7240-1:2014
|
Fire detection and alarm systems — Part 1: General and definitions |
ISO 7240-7:2011
|
Fire detection and alarm systems Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization |
ISO 834-6:2000
|
Fire-resistance tests — Elements of building construction — Part 6: Specific requirements for beams |
ISO 19701:2013
|
Methods for sampling and analysis of fire effluents |
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
ISO/TR 13387-5:1999
|
Fire safety engineering Part 5: Movement of fire effluents |