ISO 17643:2015
Current
Current
The latest, up-to-date edition.
Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
07-09-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 17643:2015 defines eddy current testing techniques for detection of surface breaking and near surface planar discontinuities, mainly in ferritic materials (weld material, heat-affected zones, base material).
Eddy current testing can also be specified for use with non-ferritic materials, for example in an application standard.
The techniques can be applied to coated and uncoated objects during fabrication and in service, both onshore and offshore.
Eddy current testing can be carried out on all accessible surfaces and on welds of almost any configuration.
Unless otherwise specified at specific items in this International Standard, the general principles of ISO 15549 apply.
NOTE Eddy current testing is usually performed in the as-welded condition. However, the accuracy of the results can be affected by very rough surface finishes.
| DevelopmentNote |
Supersedes ISO/DIS 17643. (09/2015)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 17643 : 2015 | Identical |
| NBN EN ISO 17643 : 2015 | Identical |
| NEN EN ISO 17643 : 2015 | Identical |
| NS EN ISO 17643 : 2015 | Identical |
| I.S. EN ISO 17643:2015 | Identical |
| PN EN ISO 17643 : 2015 | Identical |
| SN EN ISO 17643 : 2015 | Identical |
| UNI EN ISO 17643 : 2015 | Identical |
| SS-EN ISO 17643:2015 | Identical |
| AS ISO 17643:2020 | Identical |
| UNE-EN ISO 17643:2016 | Identical |
| BS EN ISO 17643:2015 | Identical |
| EN ISO 17643:2015 | Identical |
| DIN EN ISO 17643:2015-12 | Identical |
| DIN EN 1711:2000-03 | Identical |
| I.S. EN ISO 19904-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| CSA ISO 19904-1 : 2007 : R2012 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| PREN ISO 15614-13 : DRAFT 2010 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| DIN EN ISO 17635:2017-04 | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| BS ISO 19904-1 : 2006 AMD 16927 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 15/30303377 DC : 0 | BS EN ISO 17635 - NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS - COMPLEMENTARY ELEMENT |
| BS EN ISO 17635:2016 | Non-destructive testing of welds. General rules for metallic materials |
| API 2FPS : 2011 | PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS |
| DIN EN ISO 17635:2015-08 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| CSA ISO 19904-1 : 2007 : R2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| ISO 19904-1:2006 | Petroleum and natural gas industries Floating offshore structures Part 1: Monohulls, semi-submersibles and spars |
| DIN EN ISO 15614-13:2012-10 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| I.S. EN ISO 15614-13:2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| 10/30217417 DC : 0 | BS EN ISO 15614-13 - SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: RESISTANCE BUTT (UPSET) AND FLASH WELDING |
| I.S. EN ISO 17635:2016 | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| ONORM EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| ISO 10855-3:2018 | Offshore containers and associated lifting sets — Part 3: Periodic inspection, examination and testing |
| CSA ISO 19904-1 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| UNE-EN ISO 15614-13:2013 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012) |
| BS EN ISO 19904-1:2006 | Petroleum and natural gas industries. Floating offshore structures Monohulls, semi-submersibles and spars |
| EN ISO 19904-1:2006 | Petroleum and natural gas industries - Floating offshore structures - Part 1: Monohulls, semi-submersibles and spars (ISO 19904-1:2006) |
| UNE-EN ISO 17635:2017 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| 17/30291980 DC : 0 | BS EN ISO 19904-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: SHIP-SHAPED, SEMI-SUBMERSIBLE, SPAR AND SHALLOW-DRAUGHT CYLINDRICAL STRUCTURES |
| 17/30353039 DC : 0 | BS EN ISO 15620 - WELDING - FRICTION WELDING OF METALLIC MATERIALS |
| BS EN ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials. Welding procedure test Upset (resistance butt) and flash welding |
| UNI EN ISO 15614-13 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 15548-3:2008 | Non-destructive testing — Equipment for eddy current examination — Part 3: System characteristics and verification |
| ISO 15549:2008 | Non-destructive testing Eddy current testing General principles |
| ISO 12718:2008 | Non-destructive testing Eddy current testing Vocabulary |
| ISO 15548-1:2013 | Non-destructive testing — Equipment for eddy current examination — Part 1: Instrument characteristics and verification |
| ISO 15548-2:2013 | Non-destructive testing — Equipment for eddy current examination — Part 2: Probe characteristics and verification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.