BS ISO 19904-1 : 2006 AMD 16927

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

PETROLEUM AND NATURAL GAS INDUSTRIES - FLOATING OFFSHORE STRUCTURES - PART 1: MONOHULLS, SEMI-SUBMERSIBLES AND SPARS

Available format(s):

Superseded date: 30-03-2007

Language(s):

Published date: 06-12-2012

Publisher: British Standards Institution

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
   4.1 Symbols
   4.2 Abbreviated terms
5 Overall considerations
   5.1 Functional requirements
   5.2 Safety requirements
   5.3 Planning requirements
   5.4 Rules and regulations
   5.5 General requirements
   5.6 Independent verification
   5.7 Analytical tools
   5.8 In-service inspection and maintenance
   5.9 Assessment of existing floating structures
   5.10 Reuse of existing floating structures
6 Basic design requirements
   6.1 General
   6.2 Exposure levels
   6.3 Limit states
   6.4 Design situations
7 Actions and action effects
   7.1 General
   7.2 Permanent actions (G)
   7.3 Variable actions (Q)
   7.4 Accidental actions (A)
   7.5 Environmental actions (E)
   7.6 Other actions
   7.7 Repetitive actions
   7.8 Action combinations
8 Global analysis
   8.1 General
   8.2 Static and mean response analyses
   8.3 Global dynamic behaviour
   8.4 Frequency domain analysis
   8.5 Time domain analysis
   8.6 Uncoupled analysis
   8.7 Coupled analysis
   8.8 Resonant excitation and response
   8.9 Platform offset
   8.10 Air gap
   8.11 Platform motions and accelerations
   8.12 Model tests
   8.13 Design situations for structural analysis
9 Structural considerations
   9.1 General
   9.2 Representative values of actions
   9.3 Design scantlings
   9.4 Modelling
   9.5 Structural analysis
   9.6 Structural strength
   9.7 Design checks
   9.8 Special design issues
   9.9 Material
   9.10 Corrosion protection of steel
   9.11 Fabrication and construction
   9.12 Marine operations
   9.13 Topsides/hull interface
10 Fatigue analysis and design
   10.1 General
   10.2 Fatigue damage design safety factors
   10.3 Outline of approach
   10.4 Environmental data
   10.5 Structural modelling
   10.6 Hydrostatic analyses
   10.7 Response amplitude operators and combinations
         of actions
   10.8 Stresses and SCFs
   10.9 Stress range counting and distribution
   10.10 Fatigue resistance
   10.11 Damage accumulation
   10.12 Fracture mechanics methods
   10.13 Fatigue-sensitive components and connections
11 Monohulls
   11.1 General
   11.2 General design criteria
   11.3 Structural strength
12 Semi-submersibles
   12.1 General
   12.2 General design criteria
   12.3 Structural strength
13 Spars
   13.1 General
   13.2 General design requirements
   13.3 Structural strength
14 Conversion and reuse
   14.1 General
   14.2 Minimum design, construction and maintenance
         standards
   14.3 Pre-conversion structural survey
   14.4 Effects of prior service
   14.5 Corrosion protection and material suitability
   14.6 Inspection and maintenance
15 Hydrostatic stability and compartmentation
   15.1 General
   15.2 Inclining test
   15.3 Compartmentation
   15.4 Watertight and weathertight appliances
   15.5 Special requirements for monohulls
16 Mechanical systems
   16.1 General
   16.2 Hull systems
   16.3 Import and export systems
   16.4 Fire protection systems
17 Stationkeeping systems
   17.1 General
   17.2 Mooring equipment
   17.3 Turret
18 In-service inspection, monitoring and maintenance
   18.1 General
   18.2 Structural integrity management system
         philosophies
   18.3 Planning considerations
   18.4 Implementation issues
   18.5 Minimum requirements
Annex A (informative) Additional information and guidance
   A.1 Scope
   A.2 Normative references
   A.3 Terms and definitions
   A.4 Symbols and abbreviated terms
   A.5 Overall considerations
   A.6 Basic design requirements
   A.7 Actions and action effects
   A.8 Global analysis
   A.9 Structural considerations
   A.10 Fatigue analysis and design
   A.11 Monohulls
   A.12 Semi-submersibles
   A.13 Spars
   A.14 Conversion and reuse
   A.15 Hydrostatic stability and compartmentation
   A.16 Mechanical systems
   A.17 Stationkeeping systems
   A.18 In-service inspection, monitoring and maintenance
Bibliography

Abstract - (Show below) - (Hide below)

Specifies requirements and guidance for the structural design and/or assessment of floating offshore platforms used by the petroleum and natural gas industries to support the following functions: production; storage and/or offloading; drilling and production; production, storage and offloading; drilling, production, storage and offloading.

General Product Information - (Show below) - (Hide below)

Committee	B/525/12
Development Note	Renumbered and superseded by BS EN ISO 19904-1. Supersedes 04/19985215 DC. (03/2007)
Document Type	Standard
ISBN
Pages
Published
Publisher	British Standards Institution
Status	Superseded
Superseded By	BS EN ISO 19904-1:2006
Supersedes	04/19985215 DC : DRAFT DEC 2004

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
ISO 19904-1:2006	Identical

Standards Referencing This Book - (Show below) - (Hide below)

BS 7448-1:1991	Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of metallic materials
BV NR494 : R02	RULES FOR THE CLASSIFICATION OF OFFSHORE LOADING & OFFLOADING BUOYS
ISO 17643:2015	Non-destructive testing of welds Eddy current testing of welds by complex-plane analysis
ISO 19901-6:2009	Petroleum and natural gas industries — Specific requirements for offshore structures — Part 6: Marine operations
ISO 19901-2:2017	Petroleum and natural gas industries Specific requirements for offshore structures Part 2: Seismic design procedures and criteria
ISO 19900:2013	Petroleum and natural gas industries General requirements for offshore structures
BV NR384 : R01	HULL STRUCTURE DESIGN - ALUMINIUM ALLOY SHIPS (CHAPTER 12)
ISO 13628-1:2005	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
ISO 9089:1989	Marine structures Mobile offshore units Anchor winches
BV NR184 : R00	RULES FOR THE CLASSIFICATION AND CERTIFICATION OF LIFTING APPLIANCES OF SHIPS AND OFFSHORE UNITS
ISO 17635:2016	Non-destructive testing of welds — General rules for metallic materials
BV NI171 : R00	SLOSHING ON BOARD SHIP PARTIAL FILLING STUDY
ISO 10420:1994	Petroleum and natural gas industries — Flexible pipe systems for subsea and marine riser applications
API RP 14C : 2017	ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
BS 8010-3:1993	Code of practice for pipelines Pipelines subsea: design, construction and installation
API 2V : 2004	DESIGN OF FLAT PLATE STRUCTURES
API SPEC 17K : 2017	SPECIFICATION FOR BONDED FLEXIBLE PIPE
ISO 19901-7:2013	Petroleum and natural gas industries — Specific requirements for offshore structures — Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units
ISO 6361-1:2011	Wrought aluminium and aluminium alloys — Sheets, strips and plates — Part 1: Technical conditions for inspection and delivery
ISO 2394:2015	General principles on reliability for structures
ISO 17636:2003	Non-destructive testing of welds Radiographic testing of fusion-welded joints
EN 12473:2014	General principles of cathodic protection in seawater
API SPEC 17J : 2014	SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ISO 281:2007	Rolling bearings Dynamic load ratings and rating life
ISO 17640:2017	Non-destructive testing of welds Ultrasonic testing Techniques, testing levels, and assessment
BV NI299 : R00	GUIDELINES ON DOCUMENTS TO BE SUBMITTED FOR STABILITY STUDY
NFPA 10 : 2018	PORTABLE FIRE EXTINGUISHERS
API 2RD : 2013	DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS
ISO 13535:2000	Petroleum and natural gas industries Drilling and production equipment Hoisting equipment
API 8C : 2012	DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2)
ISO 13628-7:2005	Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
BV NR423 : R00	CORROSION PROTECTION OF STEEL OFFSHORE UNITS AND INSTALLATIONS
BV NR497 : R00	HULL STRUCTURE OF PRODUCTION, STORAGE AND OFFLOADING SURFACE UNITS
API RP 16Q : 2017	DESIGN, SELECTION, OPERATION, AND MAINTENANCE OF MARINE DRILLING RISER SYSTEMS
ISO 2103:1986	Loads due to use and occupancy in residential and public buildings
BV NR446 : R00	RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS - INTRODUCTION
API RP 17B : 2014	RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
ISO 17637:2016	Non-destructive testing of welds Visual testing of fusion-welded joints
BS 7448-2:1997	Fracture mechanics toughness tests Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
BV NI409 : R00	GUIDELINES FOR CORROSION PROTECTION OF SEAWATER BALLAST TANKS AND HOLD SPACES
API 2C : 2012	OFFSHORE PEDESTAL-MOUNTED CRANES
API 2U : 2004	BULLETIN ON STABILITY DESIGN OF CYLINDRICAL SHELLS
BV NI393 : R01	FATIGUE STRENGTH OF WELDED SHIP STRUCTURES
BV NR460 : R00	SAFETY FEATURES OF OFFSHORE UNITS AND INSTALLATIONS
EN 13173 : 2001	CATHODIC PROTECTION FOR STEEL OFFSHORE FLOATING STRUCTURES
API 14G : 2007	RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
ISO 19901-5:2016	Petroleum and natural gas industries Specific requirements for offshore structures Part 5: Weight control during engineering and construction
BV NR445 : 2016	RULES FOR THE CLASSIFICATION OF OFFSHORE UNITS (FULL PACKAGE)
ISO 19901-1:2015	Petroleum and natural gas industries Specific requirements for offshore structures Part 1: Metocean design and operating considerations
ISO 13628-5:2009	Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals
BV NI165 : R00	ULTRASONIC TESTING OF HULL BUTT WELDS
ISO 13702:2015	Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
API 2FPS : 2011	PLANNING, DESIGNING, AND CONSTRUCTING FLOATING PRODUCTION SYSTEMS
ISO 17638:2016	Non-destructive testing of welds Magnetic particle testing
API 2D : 2014	OPERATION AND MAINTENANCE OF OFFSHORE CRANES
ISO 76:2006	Rolling bearings Static load ratings
API 17D : 2011	DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - SUBSEA WELLHEAD AND TREE EQUIPMENT
ISO 13623:2017	Petroleum and natural gas industries — Pipeline transportation systems
API 8A : 1997	SPECIFICATION FOR DRILLING AND PRODUCTION HOISTING EQUIPMENT

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart