ISO 18413:2015
Current
Current
The latest, up-to-date edition.
Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
20-03-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 18413:2015 specifies the content of an inspection document that specifies both the cleanliness requirement for the specified hydraulic fluid power component and the inspection method to be used for evaluating its cleanliness level. In addition, guidelines for relevant extraction methods and analysis methods are given.
Determination of what constitutes as an appropriate cleanliness level requirement for any particular component is beyond the scope of ISO 18413:2015. ISO 12669 provides a method of determining the required cleanliness of a hydraulic system. ISO TR 10686 provides a method of relating the required cleanliness of components to the required cleanliness of the hydraulic system.
For the purposes of ISO 18413:2015, approved functional liquids are considered to be components.
ISO 18413:2015 is applicable to the particulate contamination on the wetted surfaces and volumes of any hydraulic fluid power system component. Appearance defects and liquid or gaseous contamination are not covered by ISO 18413:2015.
ISO 18413:2015 does not address safety problems that might arise from hazardous materials, operations, and equipment associated with its use. The user of ISO 18413:2015 is responsible for establishing appropriate safety and health practices and determining the applicability of regulatory limitations prior to use.
| DevelopmentNote |
Supersedes NFPA T2.9.15 (03/2003) Supersedes ISO/DIS 18413. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI ISO 18413 : 2017 | Identical |
| BS ISO 18413:2015 | Identical |
| NEN ISO 18413 : 2015 | Identical |
| NF ISO 18413 : 2015 | Identical |
| GOST ISO 18413 : 2006 | Identical |
| 04/30098089 DC : DRAFT APR 2004 | ISO 16232-4 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 4: METHOD OF EXTRACTION OF CONTAMINANTS BY ULTRASONIC TECHNIQUES |
| BS ISO 16431:2012 | Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
| BS ISO 14085-6:2015 | Aerospace series. Hydraulic filter elements. Test methods Initial cleanliness level |
| ISO 19724:2016 | Gasoline engines with direct injection Cleanliness assessment of fuel injection equipment |
| SAE J 1779 : 2013 | SHIP SYSTEMS AND EQUIPMENT - HYDRAULIC SYSTEM DESIGN CRITERIA FOR MARINE VEHICLES |
| PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
| ISO 16232-9:2007 | Road vehicles Cleanliness of components of fluid circuits Part 9: Particle sizing and counting by automatic light extinction particle counter |
| ISO 16232-2:2007 | Road vehicles Cleanliness of components of fluid circuits Part 2: Method of extraction of contaminants by agitation |
| 10/30207686 DC : DRAFT DEC 2010 | BS ISO 12345 - DIESEL ENGINES - CLEANLINESS ASSESSMENT OF FUEL INJECTION EQUIPMENT |
| ISO/TR 10949:2002 | Hydraulic fluid power Component cleanliness Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| 17/30354017 DC : 0 | BS ISO 16232 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS AND SYSTEMS |
| 08/30168621 DC : DRAFT JAN 2008 | BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
| PD ISO/TR 10686:2013 | Hydraulic fluid power. Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
| BS ISO 16232-5:2007 | Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants on functional test bench |
| BS ISO 16232-3:2007 | Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants by pressure rinsing |
| 04/30098086 DC : DRAFT APR 2004 | ISO 16232-3 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 3: METHOD OF EXTRACTION OF CONTAMINANTS BY PRESSURE RINSING |
| ISO 16431:2012 | Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
| 04/30098170 DC : DRAFT APR 2004 | ISO 16232-10 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 10: EXPRESSION OF RESULTS |
| BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
| ISO 12345:2013 | Diesel engines Cleanliness assessment of fuel injection equipment |
| BS ISO 16232-6:2007 | Road vehicles. Cleanliness of components of fluid circuits Particle mass determination by gravimetric analysis |
| PD ISO/TS 18409:2018 | Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| 04/30098096 DC : DRAFT APR 2004 | ISO 16232-6 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 6: GRAVIMETRIC ANALYSIS |
| PD ISO/TR 10949:2002 | Hydraulic fluid power. Component cleanliness. Guidelines for achieving and controlling cleanliness of components from manufacture to installation |
| 09/30176303 DC : 0 | BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
| PD ISO/TS 16431:2002 | Hydraulic fluid power. Assembled systems. Verification of cleanliness |
| 16/30303345 DC : DRAFT JAN 2016 | BS ISO 19724 - GASOLINE ENGINES WITH DIRECT INJECTION - CLEANLINESS ASSESSMENT OF FUEL INJECTION EQUIPMENT |
| ISO 14085-6:2015 | Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level |
| 16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
| BS ISO 16232-4:2007 | Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants by ultrasonic techniques |
| BS ISO 16232-9:2007 | Road vehicles. Cleanliness of components of fluid circuits Particle sizing and counting by automatic light extinction particle counter |
| ISO 12584:2013 | Aerospace Hydraulic fluid components Expression of particulate contamination levels |
| 04/30098167 DC : DRAFT APR 2004 | ISO 16232-9 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 9: PARTICLE SIZING AND COUNTING BY AUTOMATIC LIGHT EXTINCTION PARTICLE COUNTER |
| 11/30187639 DC : 0 | BS ISO 12584 - AEROSPACE - HYDRAULIC FLUID COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVELS |
| 04/30098080 DC : DRAFT APR 2004 | ISO 16232-1 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 1: VOCABULARY |
| BS ISO 12345:2013 | Diesel engines. Cleanliness assessment of fuel injection equipment |
| BS ISO 12584:2013 | Aerospace. Hydraulic fluid components. Expression of particulate contamination levels |
| ISO/TR 10686:2013 | Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
| BS ISO 16232-2:2007 | Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants by agitation |
| ISO 28521:2009 | Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
| ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
| BS ISO 19724:2016 | Gasoline engines with direct injection. Cleanliness assessment of fuel injection equipment |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| 11/30075025 DC : 0 | ISO 21017 - HYDRAULIC FLUID POWER - CLEANLINESS OF PARTS AND COMPONENTS - EXPRESSION OF PARTICULATE CONTAMINATION LEVEL |
| 05/30098254 DC : DRAFT JUL 2005 | ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
| ISO/TS 18409:2018 | Hydraulic fluid power — Hose and hose assemblies — Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
| 13/30271044 DC : 0 | BS ISO 14085-6 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 6: INITIAL CLEANLINESS LEVEL |
| 04/30098083 DC : DRAFT APR 2004 | ISO 16232-2 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 2: METHOD OF EXTRACTION OF CONTAMINANTS BY AGITATION |
| ISO 16232-3:2007 | Road vehicles Cleanliness of components of fluid circuits Part 3: Method of extraction of contaminants by pressure rinsing |
| ISO 16232-5:2007 | Road vehicles Cleanliness of components of fluid circuits Part 5: Method of extraction of contaminants on functional test bench |
| ISO 23309:2007 | Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
| ISO 16232-4:2007 | Road vehicles Cleanliness of components of fluid circuits Part 4: Method of extraction of contaminants by ultrasonic techniques |
| ISO 16232-6:2007 | Road vehicles Cleanliness of components of fluid circuits Part 6: Particle mass determination by gravimetric analysis |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ISO/TR 10686:2013 | Hydraulic fluid power Method to relate the cleanliness of a hydraulic system to the cleanliness of the components and hydraulic fluid that make up the system |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
| ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.