ISO 1924-2:2008
Current
Current
The latest, up-to-date edition.
Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
08-12-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 1924-2:2008 specifies a method for measuring the tensile strength, strain at break and tensile energy absorption of paper and board, using a testing machine operating at a constant rate of elongation (20 mm/min). ISO 1924-2:2008 also specifies equations for calculating the tensile index, the tensile energy absorption index and the modulus of elasticity.
Testing in conformance with ISO 1924-2:2008 always includes the measurement of tensile strength. Measurement or calculation of other properties is subject to agreement between the parties concerned.
ISO 1924-2:2008 is applicable to all papers and boards, including papers with a high strain at break if the results are within the capacity of the testing machine. It also applies to the components of corrugated board but not, however, to corrugated board itself.
| Committee |
ISO/TC 6/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 1924-2. (12/2008)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST R ISO 1924-2 : 2012 | Identical |
| NF EN ISO 1924-2 : 2009 | Identical |
| NBN EN ISO 1924-2 : 2009 | Identical |
| NEN EN ISO 1924-2 : 2009 | Identical |
| NS EN ISO 1924-2 : 2ED 2008 | Identical |
| I.S. EN ISO 1924-2:2009 | Identical |
| PN EN ISO 1924-2 : 2010 | Identical |
| SN EN ISO 1924-2:2009 | Identical |
| UNI EN ISO 1924-2 : 2009 | Identical |
| SS-EN ISO 1924-2:2008 | Identical |
| UNE-EN ISO 1924-2:2009 | Identical |
| BIS IS 1060-5-6 : 2014 | Identical |
| BS EN ISO 1924-2:2008 | Identical |
| EN ISO 1924-2:2008 | Identical |
| DIN EN ISO 1924-2:2009-05 | Identical |
| I.S. EN ISO 12625-12:2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| DIN ISO 3781:2012-07 | Paper and board - Determination of tensile strength after immersion in water (ISO 3781:2011) |
| INCITS/ISO/IEC 15457-1 : 2011 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| BS EN 60641-2:2004 | Pressboard and presspaper for electrical purposes Methods of tests |
| 15/30325867 DC : 0 | BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| BS ISO 11798:1999 | Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods |
| BS ISO 3781:2011 | Paper and board. Determination of tensile strength after immersion in water |
| 11/30251994 DC : 0 | BS EN 13963 - JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 06/30159593 DC : 0 | BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| PREN 13963 : DRAFT 2011 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14353 : DRAFT 2016 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 06/30154066 DC : 0 | BS ISO/IEC 15457-1 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| NF EN 60554-2 : 2003 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| INCITS/ISO/IEC 15457-3 : 2002 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| I.S. EN 60641-2:2004 | SPECIFICATION FOR PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - METHODS OF TEST |
| S.R. CEN ISO/TS 16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 (ISO/TS 16775:2014) |
| CAN/CSA-ISO/TS 16775:17 | Packaging for terminally sterilized medical devices — Guidance on the application of ISO 11607-1 and ISO 11607-2 (Adopted ISO technical specification 16775:2014, first edition, 2014-05-15) |
| BS EN 14353 : 2007 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI ISO 11798 : 2011 | INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-10:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 17/30360918 DC : 0 | BS EN 868-9 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 17/30360912 DC : 0 | BS EN 868-10 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| ISO 12776:2008 | Pallets — Slip sheets |
| UNE-EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| BS EN ISO 5270:2012 | Pulps. Laboratory sheets. Determination of physical properties |
| UNE-EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| BS EN 868-3:2017 | Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
| UNE-EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| BS EN ISO 12625-4:2016 | Tissue paper and tissue products Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| DIN ISO 5630-5:2017-03 | Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 ?C (ISO 5630-5:2008) |
| EN ISO 12625-5:2016 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| DIN EN 868-4:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) |
| EN ISO 12625-4:2016 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| ONORM EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| 07/30158830 DC : 0 | BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| 03/309374 DC : DRAFT JUNE 2003 | ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| 15/30323953 DC : 0 | BS EN ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| 15/30323949 DC : 0 | BS EN ISO 12625-4 - TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT MAXIMUM FORCE AND TENSILE ENERGY ABSORPTION |
| BS ISO 15361:2000 | Pulps. Determination of zero-span tensile strength, wet or dry |
| PD CEN ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices. Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| NF EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| ISO 5630-5:2008 | Paper and board — Accelerated ageing — Part 5: Exposure to elevated temperature at 100 degrees C |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| PREN 868-7 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 12625-12:2010 | Tissue paper and tissue products Determination of tensile strength of perforated lines. Calculation of perforation efficiency |
| BS ISO 12776:2008 | Pallets. Slip sheets |
| UNI EN 868-10 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| BS EN 868-9:2009 | Packaging for terminally sterilized medical devices Uncoated nonwoven materials of polyolefines. Requirements and test methods |
| 03/310719 DC : DRAFT JUNE 2003 | ISO 12625-5 - TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH |
| ISO 1924-1:1992 | Paper and board Determination of tensile properties Part 1: Constant rate of loading method |
| PREN 868-3 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| UNI EN 868-9 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| BS EN 868-10:2009 | Packaging for terminally sterilized medical devices Adhesive coated nonwoven materials of polyolefines. Requirements and test methods |
| I.S. EN 14353:2017 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 13593:2003 | Packaging. Paper sacks for household waste collection. Types, requirements and test methods |
| IEC 60554-2:2001 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| BS EN ISO 12625-5:2016 | Tissue paper and tissue products Determination of wet tensile strength |
| BS EN 868-7:2017 | Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
| UNE-EN 868-4:2017 | Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods |
| UNE-EN ISO 5270:2013 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| I.S. EN 868-4:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13963:2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-3:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-7:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 12625-5:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 5: DETERMINATION OF WET TENSILE STRENGTH (ISO 12625-5:2016) |
| I.S. EN 868-2:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-6:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 5270:2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| I.S. EN ISO 12625-4:2016 | TISSUE PAPER AND TISSUE PRODUCTS - PART 4: DETERMINATION OF TENSILE STRENGTH, STRETCH AT BREAK AND TENSILE ENERGY ABSORPTION |
| ONORM EN ISO 5270 : 2013 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES (ISO 5270:2012) |
| DIN EN 60763-2 : 2007 | SPECIFICATION FOR LAMINATED PRESSBOARD - PART 2: METHODS OF TEST |
| PREN 868-10 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 12625-12 : 2010 | TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| BS ISO 4046-5:2016 | Paper, board, pulps and related terms. Vocabulary Properties of pulp, paper and board |
| BS ISO/IEC 15457-3:2008 | Identification cards. Thin flexible cards Test methods |
| BS 4415-1:1985 | Determination of the tensile properties of paper and board. Constant rate of loading method |
| 08/30183287 DC : DRAFT JUNE 2008 | BS ISO 12625-12 - TISSUE PAPER AND TISSUE PRODUCTS - PART 12: DETERMINATION OF TENSILE STRENGTH OF PERFORATED LINES - CALCULATION OF PERFORATION EFFICIENCY |
| CEI EN 60554-2 : 2002 | CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| CSA ISO/IEC 15457-1 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| CSA ISO/IEC 15457-1 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| PREN 868-2 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| ISO 4046-5:2002 | Paper, board, pulps and related terms Vocabulary Part 5: Properties of pulp, paper and board |
| ISO 9884-1:1994 | Tea sacks Specification Part 1: Reference sack for palletized and containerized transport of tea |
| DIN EN 13963:2014-09 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 868-10:2009 | Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods |
| I.S. EN 868-10:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| EN 868-9:2009 | Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods |
| EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| UNI EN ISO 5270 : 2012 | PULPS - LABORATORY SHEETS - DETERMINATION OF PHYSICAL PROPERTIES |
| EN 868-4:2017 | Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods |
| UNI EN 13963 : 2014 | JOINTING MATERIALS FOR GYPSUM BOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30325855 DC : 0 | BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS ISO TR 12776:1995 | Pallets. Slip sheets |
| DIN EN 14353:2016-02 (Draft) | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 07/30166924 DC : DRAFT AUG 2007 | BS EN 868-2 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| BS ISO 5630-5:2008 | Paper and board. Accelerated ageing Exposure to elevated temperature at 100 °C |
| DIN EN ISO 12625-12:2010-05 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| BS ISO/IEC 15457-1:2001 | Identification cards. Thin flexible cards Physical characteristics |
| DIN ISO 5630-5:2016-10 (Draft) | PAPER AND BOARD - ACCELERATED AGEING - PART 5: EXPOSURE TO ELEVATED TEMPERATURE AT 100 DEGREES C (ISO 5630-5:2008) |
| CEI EN 60641-2 : 2005 | PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
| 07/30166930 DC : DRAFT AUG 2007 | BS EN 868-4 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| PREN 868-6 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 07/30166936 DC : DRAFT AUG 2007 | BS EN 868-6 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR THE MANUFACTURE OF STERILE BARRIER SYSTEMS INTENDED FOR STERILIZATION BY LOW TEMPERATURE STERILIZATION PROCESSES OR IRRADIATION - REQUIREMENTS AND TEST METHODS |
| BS ISO 5270:1998 | Pulps. Laboratory sheets. Determination of physical properties |
| CSA ISO/IEC 15457-3:09 (R2019) | Identification cards - Thin flexible cards - Part 3: Test methods (Adopted ISO/IEC 15457-3:2008, second edition, 2008-03-01) |
| ANSI/AAMI/ISO TIR16775:2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| PREN 868-9 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| PREN 868-4 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| ISO/TR 12776:1995 | Pallets Slip sheets |
| ISO/IEC 15457-3:2008 | Identification cards — Thin flexible cards — Part 3: Test methods |
| DIN EN ISO 5270:2013-02 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 12625-4:2017 | Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016) |
| BS EN 868-2:2017 | Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
| ISO/TS 16775:2014 | Packaging for terminally sterilized medical devices Guidance on the application of ISO 11607-1 and ISO 11607-2 |
| ISO 12625-12:2010 | Tissue paper and tissue products — Part 12: Determination of tensile strength of perforated lines — Calculation of perforation efficiency |
| BS EN 13963:2014 | Jointing materials for gypsum boards. Definitions, requirements and test methods |
| UNE-EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| BS EN 12625-5:1999 | Tissue paper and tissue products Determination of wet tensile strength |
| UNE-EN ISO 12625-5:2017 | Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016) |
| BS EN 829:1997 | In vitro diagnostic systems. Transport packages for medical and biological specimens. Requirements, tests |
| IEC 60819-2:2001 | Non-cellulosic papers for electrical purposes - Part 2: Methods of test |
| ISO 5270:2012 | Pulps — Laboratory sheets — Determination of physical properties |
| BS EN 868-4:2017 | Packaging for terminally sterilized medical devices Paper bags. Requirements and test methods |
| UNE-ISO 3781:2015 | Paper and board - Determination of tensile strength after inmersion in water |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| BS EN 868-6:2017 | Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
| EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| EN 13593:2003 | Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
| UNI CEN ISO/TS 16775 : 2014 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - GUIDANCE ON THE APPLICATION OF ISO 11607-1 AND ISO 11607-2 |
| EN 13963:2014 | Jointing materials for gypsum boards - Definitions, requirements and test methods |
| EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| EN 753-1 : 1997 | IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - GENERAL TECHNICAL SPECIFICATIONS |
| EN ISO 5270:2012 | Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) |
| EN 14353:2017 | Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods |
| EN 753-3 : 1999 | IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS |
| EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| UNE-EN ISO 12625-12:2010 | Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines - Calculation of perforation efficiency (ISO 12625-12:2010) |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| ISO 11798:1999 | Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods |
| 16/30332914 DC : 0 | BS EN 14353 - METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30325864 DC : 0 | BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| NF EN 60641-2 : 2005 | PRESSBOARD AND PRESS PAPER FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TESTS |
| 15/30325861 DC : 0 | BS EN 868-4 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| 15/30325858 DC : 0 | BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 07/30166927 DC : DRAFT AUG 2007 | BS EN 868-3 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| 03/310738 DC : DRAFT JULY 2003 | EN 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| BS EN 60554-2:2002 | Cellulosic papers for electrical purposes Methods of test |
| DIN EN 868-9:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| 01/648266 DC : DRAFT MAY 2001 | ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| CSA ISO/IEC 15457-3 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS |
| I.S. EN 868-9:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES - REQUIREMENTS AND TEST METHODS |
| ISO 15361:2000 | Pulps Determination of zero-span tensile strength, wet or dry |
| DIN EN 868-4:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 4: PAPER BAGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| IEC 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| UNE-EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| BS EN 753-1:1997 | Identification card systems. Intersector thin flexible cards General technical specifications |
| ISO 12625-5:2016 | Tissue paper and tissue products — Part 5: Determination of wet tensile strength |
| BS EN 12858:1999 | Paper. Printing and business paper. Requirements for continuous stationery |
| BS EN 753-3:1999 | Identification card systems. Intersector thin flexible cards Test methods |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| EN 60554-2:2002 | Cellulosic papers for electrical purposes - Part 2: Methods of test |
| EN 60641-2:2004 | Pressboard and presspaper for electrical purposes - Part 2: Methods of tests |
| DIN EN 14353:2017-09 | METAL BEADS AND FEATURE PROFILES FOR USE WITH GYPSUM PLASTERBOARDS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ISO 1924-3:2005 | Paper and board Determination of tensile properties Part 3: Constant rate of elongation method (100 mm/min) |
| ISO 5270:2012 | Pulps — Laboratory sheets — Determination of physical properties |
| ISO 12625-4:2016 | Tissue paper and tissue products — Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.