Skip to content
Please enter a keyword to search

  • ISO 25762:2009

    Current The latest, up-to-date edition.

    Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French, Russian

    Published date:  18-06-2009

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 25762:2009 gives guidelines for the assessment of the fire characteristics and fire performance of fibre-reinforced polymer (FRP) composites, particularly in structural applications in buildings and transport.

    It is applicable to FRP composites prepared from thermosetting or thermoplastic resins and reinforced with inorganic fibres greater than 7,5 mm in length.

    It gives guidelines on:

    • the applicability of product types (e.g. sheets, laminates, profiled sections and some sandwich constructions) to end-use performance;
    • the test methods and performance criteria for different physical forms of FRP test specimen.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 25762. (06/2009)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS ISO 30021:2013 Plastics. Burning behavior. Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
    ISO 30021:2013 Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
    ISO/TS 15791-2:2017 Plastics — Development and use of intermediate-scale fire tests for plastics products — Part 2: Use of intermediate-scale tests for semi-finished and finished products

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5660-1:2015 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
    ISO 1268-1:2001 Fibre-reinforced plastics Methods of producing test plates Part 1: General conditions
    ISO 5658-2:2006 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
    ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
    ISO 10093:1998 Plastics Fire tests Standard ignition sources
    ISO 9705:1993 Fire tests Full-scale room test for surface products
    ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
    ISO 16312-1:2016 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria
    ISO 5659-2:2017 Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test
    ISO 5660-2:2002 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
    ISO 1268-4:2005 Fibre-reinforced plastics Methods of producing test plates Part 4: Moulding of prepregs
    ISO 11925-2:2010 Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
    ISO 1268-7:2001 Fibre-reinforced plastics Methods of producing test plates Part 7: Resin transfer moulding
    ISO 13943:2017 Fire safety — Vocabulary
    ISO 24473:2008 Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
    EN 13238:2010 Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
    ISO 13785-2:2002 Reaction-to-fire tests for façades — Part 2: Large-scale test
    ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
    EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
    ISO/TS 5658-1:2006 Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
    ISO 1268-6:2002 Fibre-reinforced plastics — Methods of producing test plates — Part 6: Pultrusion moulding
    ISO 1268-10:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 10: Injection moulding of BMC and other long-fibre moulding compounds — General principles and moulding of multipurpose test specimens
    ISO/TR 9705-2:2001 Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
    ISO 1268-8:2004 Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC
    ISO 472:2013 Plastics Vocabulary
    ISO 10840:2008 Plastics Guidance for the use of standard fire tests
    ISO 1268-2:2001 Fibre-reinforced plastics Methods of producing test plates Part 2: Contact and spray-up moulding
    ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
    ISO/TR 5660-3:2003 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
    ISO 14696:2009 Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
    ISO 13571:2012 Life-threatening components of fire Guidelines for the estimation of time to compromised tenability in fires
    ISO 19706:2011 Guidelines for assessing the fire threat to people
    ISO/TR 16312-2:2007 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models
    CEN/TS 15447:2006 Mounting and fixing in reaction to fire tests under the Construction Products Directive
    ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems — Part 1: Small room test
    ISO 9239-1:2010 Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
    ISO 1268-5:2001 Fibre-reinforced plastics Methods of producing test plates Part 5: Filament winding
    ISO 21367:2007 Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens
    ISO 1268-11:2005 Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates
    ISO 13927:2015 Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
    ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
    ISO 1268-9:2003 Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC
    ISO 1268-3:2000 Fibre-reinforced plastics Methods of producing test plates Part 3: Wet compression moulding
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective