ISO 2078:1993
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Textile glass Yarns Designation
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-03-2022
Superseded by
Published date
27-01-1993
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies a system of designating textile glass yarns based on their linear density expressed in the Tex System. The designation of a yarn consists of following elements: Type of glass used; type of yarn (continous or staple fiber); nominal diameter of fiber; linear density, direction, amount of twist and number of components. The definitions and rules of the singel-to-fold designation given in ISO 1139 are applied to these textile glass products.
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 2078 : 1995 AMD 1 2016 | Identical |
| UNI EN ISO 2078:2016 | Identical |
| NBN EN ISO 2078 : 1995 AMD 1 2016 | Identical |
| NEN EN ISO 2078 : 1995 AMD 1 2015 | Identical |
| NS EN ISO 2078 : 1994 | Identical |
| I.S. EN ISO 2078:1995 | Identical |
| PN ISO 2078 : 1996 | Identical |
| PN EN ISO 2078 : 2011 AMD 1 2016 | Identical |
| SN EN ISO 2078 : 1995 AMD 1 2016 | Identical |
| SNV ISO 2078 : 1993 | Identical |
| UNI EN ISO 2078 : 1995 | Identical |
| IS 17300 : 2019 | Identical |
| UNE-EN ISO 2078:1996 | Identical |
| BS EN ISO 2078 : 1995 | Identical |
| BS 946-2(1995) : 1995 | Identical |
| NF EN ISO 2078 : 1995 | Identical |
| DIN EN ISO 2078:2016-05 | Identical |
| BS EN ISO 2078:1994+A1:2015 | Identical |
| DIN 60851:1983-09 | Similar to |
| DIN EN 16821:2015-03 (Draft) | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| BS ISO 2113:1996 | Reinforcement fibres. Woven fabrics. Basis for a specification |
| 16/30292774 DC : 0 | BS ISO 10639 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| BS ISO 8516:2011 | Textile glass. Textured yarns. Basis for a specification |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| 03/107475 DC : 0 | IEC 61249-6-3 ED.1.0 - MATERIALS FOR INTERCONNECTION STRUCTURES - PART 6-3: SECTIONAL SPECIFICATION FOR REINFORCEMENTS - WOVEN FIBREGLASS FABRICS |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques |
| I.S. EN IEC 60370:2018 | TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| BS EN ISO 12215-1:2000 | Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 9163:2005 | Textile glass — Rovings — Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| EN 12654-1:1998 | Textile glass - Yarns - Part 1: Designation |
| DIN EN ISO 9163:2005-07 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005); German version EN ISO 9163:2005 |
| EN 12971-1:1999 | Reinforcements - Specification for textile glass chopped strands - Part 1: Designation |
| EN 1115-1 : 1997 | PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - PART 1: GENERAL |
| IPC 4412 : B | SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS |
| IPC 4412 CHINESE : B | SPECIFICATION FOR FINISHED FABRIC WOVEN FROM 'E' GLASS FOR PRINTED BOARDS |
| PREN 14364 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| BS ISO 3598:2011 | Textile glass. Yarns. Basis for a specification |
| BS ISO 2797:2017 | Textile glass. Rovings. Basis for a specification |
| 10/30237537 DC : 0 | EN 15383 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| 98/123516 DC : DRAFT JULY 1998 | PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS |
| 11/30246455 DC : 0 | BS EN 1796 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| UNI EN 14364 : 2013 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| 10/30211421 DC : 0 | BS ISO 3598 - TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| 08/30138102 DC : DRAFT MAR 2008 | BS ISO 25780 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY, IRRIGATION, DRAINAGE OR SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN - PIPES WITH FLEXIBLE JOINTS INTENDED TO BE INSTALLED USING JACKING TECHNIQUES |
| EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| ISO 10467:2004 | Plastics piping systems for pressure and non-pressure drainage and sewerage Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| ISO 3598:2011 | Textile glass Yarns Basis for a specification |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| UNI EN 1796 : 2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| ISO 2797:2017 | Textile glass — Rovings — Basis for a specification |
| DIN EN 14364:2013-05 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 14118-2:2003 | Reinforcement. Specifications for textile glass mats (chopped strand and continuous filament mats) Methods of test and general requirements |
| DIN EN 1796:2013-05 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| I.S. EN 12654-1:1999 | TEXTILE GLASS - YARNS - DESIGNATION |
| I.S. EN 1796:2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| I.S. EN 14364:2013 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| BS 3691:1990 | Specification for E glass fibre rovings for reinforcement of polyester and epoxy resin systems |
| BS 7158:2001 | Plastics inspection chambers for drains and sewers. Specification |
| BS 7158:1989 | Specification for plastics inspection chambers for drains |
| BS ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques |
| 11/30246458 DC : 0 | BS EN 14364 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - SPECIFICATIONS FOR PIPES, FITTINGS AND JOINTS |
| 15/30330425 DC : 0 | BS EN 60370 ED 2.0 - TEST PROCEDURE FOR THERMAL ENDURANCE OF INSULATING RESINS AND VARNISHES FOR IMPREGNATION PURPOSES - ELECTRIC BREAKDOWN METHODS |
| BS ISO 2559:2011 | Textile glass. Mats (made from chopped or continuous strands). Designation and basis for specifications |
| 00/120644 DC : DRAFT FEB 2000 | ISO/DIS 10639-2 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS - (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| EN 1796:2013 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| ISO 12215-1:2000 | Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| ISO 2113:1996 | Reinforcement fibres — Woven fabrics — Basis for a specification |
| BS EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses |
| 01/123351 DC : DRAFT SEP 2001 | ISO/DIS 10639.3 - PLASTIC PIPING SYSTEMS FOR WATER SUPPLY, WITH OR WITHOUT PRESSURE - GLASS REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| 16/30319470 DC : 0 | BS ISO 16611 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE WITHOUT PRESSURE - NON-CIRCULAR PIPES AND JOINTS MADE OF GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESINS (UP) - DIMENSIONS, REQUIREMENTS AND TESTS |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| 15/30315109 DC : 0 | BS EN 16821 - HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY WITH HOSES OF NON-METALLIC MATERIALS - SILICONE RUBBER HOSES |
| NF ISO 8516 : 2011 | TEXTILE GLASS - TEXTURED YARNS - BASIS FOR A SPECIFICATION |
| 16/30343625 DC : 0 | BS ISO 10467 - PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN |
| ONORM ISO 25780 : 2013 | PLASTICS PIPING SYSTEMS FOR PRESSURE AND NON-PRESSURE WATER SUPPLY, IRRIGATION, DRAINAGE OR SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) SYSTEMS BASED ON UNSATURATED POLYESTER (UP) RESIN - PIPES WITH FLEXIBLE JOINTS INTENDED TO BE INSTALLED USING JACKING TECHNIQUES |
| NF ISO 3598 : 2011 | TEXTILE GLASS - YARNS - BASIS FOR A SPECIFICATION |
| BS 5480:1990 | Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| ISO 8516:2011 | Textile glass Textured yarns Basis for a specification |
| BS EN ISO 9163:2005 | Textile glass. Rovings. Manufacture of test specimens and determination of tensile strength of impregnated rovings |
| UNE-EN 1796:2014 | Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| BS EN 12654-1:1999 | Textile glass. Yarns Designation |
| 17/30350920 DC : 0 | BS EN 63031 - DEFINITION OF LOW HALOGEN MATERIALS USED IN ELECTRONIC AND ELECTRICAL PRODUCTS |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| BS EN 1796:2013 | Plastics piping systems for water supply with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) |
| BS EN 1115-1:2001 | Plastics piping systems for underground drainage and sewerage under pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) General |
| BS EN 14020-1:2002 | Reinforcements. Specification for textile glass rovings Designation |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| UNE-EN 14364:2015 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Specifications for pipes, fittings and joints |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN ISO 9163:2005 | Textile glass - Rovings - Manufacture of test specimens and determination of tensile strength of impregnated rovings (ISO 9163:2005) |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| EN 14020-1:2002 | Reinforcements - Specification for textile glass rovings - Part 1: Designation |
| EN 16821:2017 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| EN 14118-2:2003 | Reinforcement - Specifications for textile glass mats (chopped strand and continuous filament mats) - Part 2: Methods of test and general requirements |
| PREN 1796 : DRAFT 2011 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY WITH OR WITHOUT PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) |
| ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| BS ISO 10639:2017 | Plastics piping systems for pressure and non-pressure water supply. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin |
| IEC 60370:2017 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods |
| 03/109038 DC : DRAFT MAY 2003 | ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| BS 7159:1989 | Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites |
| EN 14364:2013 | Plastics piping systems for drainage and sewerage with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Specifications for pipes, fittings and joints |
| BS EN IEC 60370:2018 | Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes. Electric breakdown methods |
| I.S. EN 16821:2017 | RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES FOR USE IN THE PHARMACEUTICAL AND BIOTECHNOLOGICAL INDUSTRY - SILICONE RUBBER HOSES |
| UNE-EN 16821:2018 | Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry - Silicone rubber hoses |
| EN ISO 12215-1:2000 | Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000) |
| ISO 2559:2011 | Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
| BS EN 12971-1:1999 | Reinforcements. Specification for textile glass chopped strands Designation |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| ISO 1139:1973 | Textiles — Designation of yarns |
| ISO 2:1973 | Textiles Designation of the direction of twist in yarns and related products |
| ISO 472:2013 | Plastics — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.