ISO 21984:2018
Current
The latest, up-to-date edition.
Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
02-02-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 21984:2018 gives guidelines for the measurement, evaluation and reporting of vibration with regard to habitability for all persons on board ships satisfying one or both of the following conditions:
a) 2-stroke cycle, long-stroke, low-speed diesel engine directly coupled to the fixed-pitch propulsion propeller is installed.
b) length of deck house (L) is limited as compared with its height (H) (i.e. deck house of around 1,0 and above in slenderness ratio of H to L). An example of length of deck house (L) and its height (H) for slenderness ratio is shown in Annex A.
Overall frequency-weighted r.m.s. vibration values in the frequency range 1 Hz to 80 Hz are given as guidance values for different spaces on ships.
ISO 21984:2018 is applicable to specific ships with intended voyages of 24 h or more.
ISO 21984:2018 specifies requirements for the instrumentation and the procedure of measurement in normally occupied spaces. It also contains analysis specifications and guidelines for the evaluation of ship vibration with respect to habitability.
This document is not applicable to machinery spaces, other than engine control rooms, where persons do not stay for prolonged periods of time.
ISO 20283‑5 is generally applicable to all ships. Requirements for measurement, evaluation and reporting of vibration with regard to habitability for all persons on board passenger and merchant ships, including specific ships to which this document may also be applicable can be found in ISO 20283‑5. This document is neither complementary nor additional but supplementary to ISO 20283‑5. The shipbuilder can select either this document or ISO 20283‑5 to apply to any specific ship upon due consideration to individual design conditions of the ship and, if any, experience in building sister or similar ships, and that particular selection is intended to be agreed on by the shipowner.
The evaluation of low-frequency ship motion which can result in motion sickness is covered by ISO 2631‑1. For the evaluation of the global structural vibration of a ship, however, see ISO 20283‑2.
| DevelopmentNote |
Supersedes ISO/DIS 21984. (02/2018)
|
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| JIS F 0908:2020 | Identical |
| BS ISO 21984:2018 | Identical |
| ISO 15016:2015 | Ships and marine technology Guidelines for the assessment of speed and power performance by analysis of speed trial data |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 20283-5:2016 | Mechanical vibration Measurement of vibration on ships Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| IEC 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| ISO 8041:2005 | Human response to vibration Measuring instrumentation |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 20283-2:2008 | Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.