Skip to content
Please enter a keyword to search

  • ISO 8041:2005

    View superseded by
    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
    View superseded by

    Human response to vibration Measuring instrumentation

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  09-12-2021

    Language(s): 

    Published date:  06-04-2005

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 8041:2005 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, periodic verification and in-situ checks, and the specification of vibration calibrators for in-situ checks.

    Vibration instruments specified in ISO 8041:2005 can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems.

    Three levels of performance testing are defined in ISO 8041:2005: pattern evaluation, i.e. a full test of the instrument against the specifications defined in this International Standard; periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification, and in-situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.

    General Product Information - (Show below) - (Hide below)

    Development Note DRAFT ISO/DIS 8041 is also available for this standard. (01/2016)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    CSA M5008 : 2003 AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR
    DIN ISO 10816-21 E : 2015 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
    CSA ISO 5349-2 : 2016 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE
    BS 6841:1987 Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock
    09/30206741 DC : 0 BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS
    BS ISO 14964:2000 MECHANICAL VIBRATION AND SHOCK - VIBRATION OF STATIONARY STRUCTURES - SPECIFIC REQUIREMENTS FOR QUALITY MANAGEMENT IN MEASUREMENT AND EVALUATION OF VIBRATION
    06/30146489 DC : DRAFT FEB 2006 ISO 10137 - BASIS FOR DESIGN OF STRUCTURES - SERVICEABILITY OF BUILDINGS AND WALKWAYS AGAINST VIBRATIONS
    I.S. EN 16230-1:2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    BS ISO 20283-5:2016 Mechanical vibration. Measurement of vibration on ships Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
    08/30182206 DC : DRAFT SEP 2008 BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY
    BS ISO 5007:2003 AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION
    02/107764 DC : DRAFT DEC 2002 ISO 18652 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE
    08/30182212 DC : DRAFT SEP 2008 BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY
    ANSI S3.18 PT1 : 2002 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 5395-1:2013 GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013)
    I.S. EN 50144-1:1998 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
    BS ISO 8727 : 1997 MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE BIODYNAMIC COORDINATE SYSTEMS
    I.S. EN 62282-3-2:2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    BS EN 16230-1 : 2013 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    I.S. EN ISO 10517:2009 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009)
    ISO 5395-1:2013 Garden equipment Safety requirements for combustion-engine-powered lawnmowers Part 1: Terminology and common tests
    I.S. EN 62841-1:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ANSI S2.70 : 2006(R2016) GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND
    ISO 21984:2018 Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships
    ANSI S2.72 PT1 : 2002 : INC : AMD 1 : 2010 : R200700 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    SAE J2834 : 2019 RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
    UNI EN ISO 28802 : 2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE
    I.S. ENV 12299:1999 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
    ISO 5007:2003 Agricultural wheeled tractors Operator's seat Laboratory measurement of transmitted vibration
    AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    DIN EN ISO 7096:2010-02 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    DIN EN 14253 E : 2008 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
    UNE-ISO 2631-2:2011 Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz)
    BS EN ISO 19432:2012 Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements
    BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
    BS EN 1032 : 2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    BS EN 12096:1997 Mechanical vibration. Declaration and verification of vibration emission values
    EN ISO 7096:2008/AC:2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    BS EN 12418 : 2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
    EN 12418:2000+A1:2009 Masonry and stone cutting-off machines for job site - Safety
    EN 15997:2011/AC:2012 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    EN 12096:1997 Mechanical vibration - Declaration and verification of vibration emission values
    EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
    EN 1032:2003+A1:2008 Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value
    EN 13490:2001+A1:2008 Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration
    EN ISO 20643:2008/A1:2012 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012)
    DIN EN ISO 10326-1:2017-03 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
    CEI EN 62841-1 : 2016 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 6954:2000 Mechanical vibration Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
    10/30195968 DC : 0 BS ISO 18738-2 - MEASUREMENT OF RIDE QUALITY - PART 2: ESCALATORS AND MOVING WALKS
    10/30214880 DC : 0 BS ISO 18738-1 - MEASUREMENT OF LIFT RIDE QUALITY - PART 1: LIFTS (ELEVATORS)
    I.S. EN 30326-1:1994 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011)
    06/30153018 DC : 0 EN 12299 - RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
    DIN EN ISO 28802:2012-06 Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012)
    CSA M7096 : 2000 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    03/119009 DC : DRAFT DEC 2003 ISO 18651 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - INTERNAL VIBRATORS FOR CONCRETE
    BS ISO 18738-1:2012 MEASUREMENT OF RIDE QUALITY - PART 1: LIFTS (ELEVATORS)
    ISO 18738-2:2012 Measurement of ride quality Part 2: Escalators and moving walks
    17/30354940 DC : 0 BS ISO 21984 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR MEASUREMENT, EVALUATION AND REPORTING OF VIBRATION WITH REGARD TO HABITABILITY ON SPECIFIC SHIPS
    13/30272883 DC : 0 BS EN ISO 5349-2:2001/AMD 1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE - AMENDMENT 1
    10/30210053 DC : 0 BS ISO 20643:2005/CD AMD 1 - MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
    DIN EN 15997:2012-10 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    NF ISO 5007 : 2003 AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION
    BS EN 50144-1:1999 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS
    ISO 18738-1:2012 Measurement of ride quality Part 1: Lifts (elevators)
    I.S. EN 50144-2-13:2002 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS
    CSA ISO 10819 : 2016 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
    I.S. ENV 25349:1993 MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION (ISO 5349:1986)
    SAE J 2834 : 2013(R2019) RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY
    PREN ISO 10819 : DRAFT 2011 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO/DIS 10819:2011)
    NF EN ISO 10517 : 2009 AMD 1 2013 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY
    BS EN ISO 10326-1:2016 Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Basic requirements
    UNE-EN ISO 10326-1:2017 Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02)
    EN ISO 5395-1:2013/A1:2018 GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS - AMENDMENT 1: ANNEX G (VIBRATION TEST CODE - HAND-ARM VIBRATION AND WHOLE-BODY VIBRATION) (ISO 5395-1:2013/AMD 1:2017)
    ISO 18738:2003 Lifts (elevators) - Measurement of lift ride quality
    AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    DIN EN 12418:2010-03 Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009)
    DIN EN 13490:2009-03 MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION
    BS ISO 14837-1:2005 MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE
    BS EN 13490 : 2002
    I.S. EN 12418:2000 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
    I.S. EN 13862:2002 FLOOR CUTTING-OFF MACHINES - SAFETY
    I.S. EN ISO 19432:2012 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
    I.S. EN ISO 20643:2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
    I.S. EN 13861:2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    I.S. EN ISO 22867:2011 FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011)
    I.S. EN 14253:2003 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
    DIN EN ISO 10517:2014-03 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013)
    I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
    I.S. EN 13490:2002
    DIN EN ISO 10819:2013-12 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
    I.S. EN 1032:2003 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    VDI 2057 Blatt 2:2016-03 Human exposure to mechanical vibrations - Hand-arm vibration
    VDI 2057 Blatt 3:2017-03 HUMAN EXPOSURE TO MECHANICAL VIBRATION - WHOLE-BODY VIBRATION AT WORKPLACES IN BUILDINGS
    NF EN ISO 22867 : 2012 FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION - VIBRATION AT THE HANDLES
    VDI 2057-1 : 2017 COR 1 2017 HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION
    VDI 4087:2016-12 PLANNING, CONSTRUCTION AND MANAGING OF SCRAP WOOD YARDS
    BIS IS/ISO 2631-2 : 2003(R2007) MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ)
    DIN ISO 10816-21:2015-08 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015)
    I.S. EN ISO 5349-1:2002 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
    14/30299946 DC : 0 BS ISO 8727:1997/AMD 1 - MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE - BIODYNAMIC COORDINATE SYSTEMS
    BS IEC 60747-14-4:2011 Semiconductor devices. Discrete devices Semiconductor accelerometers
    16/30319144 DC : 0 BS ISO 20283-5 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 5: GUIDELINES FOR MEASUREMENT, EVALUATION AND REPORTING OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS
    BS EN 12299:2009 Railway applications. Ride comfort for passengers. Measurement and evaluation
    10/30173701 DC : 0 BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    BS ISO 10816-21:2015 (published 2015-05) Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox
    00/702359 DC : DRAFT JAN 2000 ISO/DIS 2631-2 - MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATIONS IN BUILDINGS (1 HZ TO 80 HZ)
    14/30265061 DC : 0 BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX
    BS ISO 6954:2000 MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT, REPORTING AND EVALUATION OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS
    15/30325986 DC : 0 BS EN ISO 10326-1 - MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
    08/30182209 DC : DRAFT SEP 2008 BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
    16/30341489 DC : 0 BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS
    UNI ISO 2631-1 : 2014 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    SAE J ISO 7096 : FEB 2003 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SET VIBRATION
    BS EN 50260-1:2002 SAFETY OF HAND-HELD BATTERY-POWERED MOTOR-OPERATED TOOLS AND BATTERY PACKS - PART 1: GENERAL REQUIREMENTS
    BS EN 61029-1 : 2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    UNI EN ISO 10517 : 2014 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    DIN EN ISO 10326-1:2015-09 (Draft) MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
    I.S. EN ISO 10819:2013 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013)
    ANSI S2.72 PT1 : 2002 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    ISO 10819:2013 Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand
    ISO 10326-2:2001 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles
    ISO 5008:2002 Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator
    IEC 60747-14-4:2011 Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers
    I.S. EN 12299:2009 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
    DIN EN 13862:2010-03 Floor cutting-off machines - Safety (includes Amendment A1:2009)
    DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
    DIN EN ISO 5349-1:2001-12 MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 20643 E : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005 + AMD 1:2012)
    DIN EN ISO 5349-2:2015-12 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015)
    DIN EN 1032:2009-02 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    DIN EN 13861:2012-01 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    DIN EN ISO 19432 E : 2012 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
    UNE-EN 62841-1:2016 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements
    ISO 28802:2012 Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
    BS EN 30326-1 : 1994 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
    BS EN ISO 7096:2008 Earth-moving machinery. Laboratory evaluation of operator seat vibration
    ISO 14837-1:2005 Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance
    ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
    BS EN 62841-1:2015 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements
    BS EN ISO 5349-1:2001 MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - GENERAL REQUIREMENTS
    ISO 22867:2011 Forestry and gardening machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles
    EN 60745-1:2009/A11:2010 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
    EN 60745-1:2006 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    UL 62841-1 : 1ED REV APR 2018 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN ISO 19432:2012 Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012)
    UNI EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
    UNI EN ISO 10819 : 2013 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
    ONORM EN 13862 : 2009 FLOOR CUTTING-OFF MACHINES - SAFETY
    UNI EN ISO 5349-1 : 2004 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
    UNI EN 13861 : 2011 SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
    UNI EN 30326-1 : 2012 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS
    UNI EN ISO 19432 : 2013 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS
    UNI EN ISO 20643 : 2012 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
    UNI EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
    UNI EN 13490 : 2009 MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION
    EN 14253:2003+A1:2007 Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance
    ONORM EN ISO 22867 : 2012 FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011)
    UNI EN 14253 : 2008 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
    UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
    UNI EN 1032 : 2009 MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE
    UNI ISO 14837-1 : 2013 MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE
    ONORM EN 12418 : 2009 MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
    ISO 2631-5:2004 Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks
    CSA ISO 5349-1 : 2016 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS
    09/30197819 DC : 0 BS ISO 2631-1/AMD1 - MECHANICAL VIBRATION - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    11/30212883 DC : 0 BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
    DIN EN 12299:2009-08 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
    BS 6912-17:1995 SAFETY OF EARTH-MOVING MACHINERY - SPECIFICATION FOR LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    DIN EN ISO 10326-1 E : 2017 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
    ABS 0162 : 2014 GUIDE FOR COMFORT ON YACHTS
    02/706469 DC : DRAFT MAY 2002 PREN ISO 20643 - HAND-TRANSMITTED VIBRATION FROM HAND-HELD OR HAND-GUIDED MACHINERY - MEASUREMENT OF VIBRATION AT THE GRIP SURFACE
    09/30205267 DC : 0 BS ISO 22867 - FORESTRY AND GARDEN MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES
    BS EN ISO 28802:2012 Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people
    07/30171078 DC : DRAFT AUG 2007 BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    BS EN 62282-3-2:2006 FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    ISO 10517:2009 Powered hand-held hedge trimmers Safety
    UNI EN 12299 : 2009 RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION
    ANSI/ASA S2.25 : 2004(R2014) American National Standard Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships
    EN ISO 10517:2009/A1:2013 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009/AMD 1:2013)
    ISO 18652:2005 Building construction machinery and equipment External vibrators for concrete
    ISO/TS 14837-32:2015 Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
    ANSI S2.72/Part 1-2002(R2007) MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    ANSI S2.25 : 2004 GUIDE FOR THE MEASUREMENT, REPORTING, AND EVALUATION OF HULL AND SUPERSTRUCTURE VIBRATION IN SHIPS
    ANSI S2.70 : 2006 : R2011 GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND
    ANSI S2.25 : 2004 : R2009 GUIDE FOR THE MEASUREMENT, REPORTING, AND EVALUATION OF HULL AND SUPERSTRUCTURE VIBRATION IN SHIPS
    BS EN ISO 10819:2013 MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND
    ISO 10816-21:2015 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox
    I.S. EN 60745-1:2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 22867:2012-04 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
    I.S. EN 61029-1:2009 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    ISO 10137:2007 Bases for design of structures - Serviceability of buildings and walkways against vibrations
    12/30272980 DC : 0 BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    ISO 19432:2012 Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements
    BS EN 28662-1:1993 HAND-HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    BS EN 14253 : 2003 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
    UNI EN ISO 7096 : 2009 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
    DIN EN ISO 20643:2012-10 Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012)
    UNE-EN ISO 22867:2012 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
    CAN/CSA-C22.2 No. 62841-1 : 2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    I.S. EN ISO 7096:2008 EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION
    DIN EN ISO 19432:2012-12 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012)
    BS EN ISO 5349-2 : 2002 MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE
    BS EN ISO 20643 : 2008 MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005)
    UNE-EN ISO 10517:2010 Powered hand-held hedge trimmers - Safety (ISO 10517:2009)
    04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    UNE-EN ISO 5349-2:2002 Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace. (ISO 5349-2:2001)
    EN 28662-1:1992 HAND HELD PORTABLE POWER TOOLS - MEASUREMENT OF VIBRATIONS AT THE HANDLE - GENERAL
    EN 13861:2011 Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery
    EN ISO 28802:2012 Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012)
    UNI EN ISO 22867 : 2012 FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES
    EN ISO 5349-2:2001/A1:2015 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
    ENV 25349 : 1992 MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986)
    EN 16230-1:2013+A1:2014 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    EN 30326-1:1994/A2:2011 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011)
    BS ISO 18738:2003 LIFTS (ELEVATORS) - MEASUREMENT OF LIFT RIDE QUALITY
    BS EN 15997:2011 All terrain vehicles (ATVs - Quads). Safety requirements and test methods
    I.S. EN 15997:2011 ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS
    BS ISO 18738-2:2012 (published 2012-12) Measurement of ride quality Escalators and moving walks
    BS ISO 10326-2:2001 Mechanical vibration — Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles
    DIN EN 16230-1:2015-04 LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS
    CSA M5007 : 2003 AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION
    BS EN 50144-2-13 : 2002 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PARTICULAR REQUIREMENTS FOR CHAIN SAWS
    BS ISO 2631-1:1997 Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration General Requirements
    BS ISO 5008:2002 AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR
    PD ISO/TS 14837-32:2015 Mechanical vibration. Ground-borne noise and vibration arising from rail systems Measurement of dynamic properties of the ground
    ISO 20283-5:2016 Mechanical vibration Measurement of vibration on ships Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
    BS ISO 22867:2004 FORESTRY MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES
    03/112608 DC : DRAFT AUG 2003 ISO 22867 - PORTABLE HAND-HELD FORESTRY MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION TEST CODE - MEASUREMENT OF VIBRATION AT THE HANDLES
    ABS 0166 : 2014 GUIDE FOR COMPLIANCE WITH THE ILO MARITIME LABOUR CONVENTION, 2006 - TITLE 3: REQUIREMENTS
    BS EN 60745-1 : 2009 HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS
    BS EN ISO 10517 : 2009 POWERED HAND-HELD HEDGE TRIMMERS - SAFETY
    ISO 8727:1997 Mechanical vibration and shock Human exposure Biodynamic coordinate systems
    I.S. EN ISO 10326-1:2016 MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016)
    ANSI S2.72 PT1 : 2002 : R2012 MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS
    ANSI S2.70:2006 GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND
    I.S. EN ISO 28802:2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012)
    ISO 10326-1:2016 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
    ISO 5349:1986 Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration
    ISO 7096:2000 Earth-moving machinery Laboratory evaluation of operator seat vibration
    IEC 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
    ISO 20643:2005 Mechanical vibration Hand-held and hand-guided machinery Principles for evaluation of vibration emission
    BS EN 13861:2011 Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery
    BS EN ISO 22867:2008 FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HANDHELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011)
    EN 62282-3-2:2006 Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
    EN 61029-1:2009/A11:2010 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS
    DIN EN 14253:2008-02 MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE
    EN 62841-1:2015/AC:2015 ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    EN ISO 22867:2011 Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011)
    EN 50260-1:2002 Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1: General requirements
    EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
    EN 12299:2009 Railway applications - Ride comfort for passengers - Measurement and evaluation
    EN 13862:2001+A1:2009 Floor cutting-off machines - Safety
    EN 50144-2-13:2002 Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws
    EN 50144-1 : 98 COR 2005 SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    ISO/IEC Guide 98:1993 Guide to the expression of uncertainty in measurement (GUM)
    ISO 10326-1:2016 Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements
    CISPR 16-1-1:2015 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus
    ISO 2631-4:2001 Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 61000-4-6:2013 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields
    CISPR 22:2008 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
    ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    DIN 45662:1996-12 VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION
    ISO 1683:2015 Acoustics Preferred reference values for acoustical and vibratory levels
    ISO 2631-2:2003 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz)
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
    ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
    IEC 61260:1995 Electroacoustics - Octave-band and fractional-octave-band filters
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective