IEC 60695-11-20:2015
|
Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
ISO 4589-3:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
ISO 11907-3:1998
|
Plastics Smoke generation Determination of the corrosivity of fire effluents Part 3: Dynamic decomposition method using a travelling furnace |
ISO 15027-3:2012
|
Immersion suits Part 3: Test methods |
ISO 9223:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
EN 520:2004+A1:2009
|
Gypsum plasterboards - Definitions, requirements and test methods |
ISO/TR 834-3:2012
|
Fire-resistance tests — Elements of building construction — Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test |
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
ISO 8030:2014
|
Rubber and plastics hoses — Method of test for flammability |
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
ISO 3582:2000
|
Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame |
ISO 5659-1:1996
|
Plastics Smoke generation Part 1: Guidance on optical-density testing |
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
ISO 10093:1998
|
Plastics Fire tests Standard ignition sources |
ISO 871:2006
|
Plastics Determination of ignition temperature using a hot-air furnace |
ISO 9705:1993
|
Fire tests Full-scale room test for surface products |
IEC 60695-5-1:2002
|
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance |
IEC 60695-4:2012
|
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
ISO 9226:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
ISO/TR 5924:1989
|
Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test) |
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source |
ISO 6940:2004
|
Textile fabrics — Burning behaviour — Determination of ease of ignition of vertically oriented specimens |
ISO 9224:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
ISO 16312-1:2016
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 1: Criteria |
ISO 5659-2:2017
|
Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement) |
ISO 9773:1998
|
Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
ISO 12992:2017
|
Plastics — Vertical flame spread determination for film and sheet |
ISO 13774:1998
|
Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability |
IEC 60332-2-2:2004
|
Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
ISO 13943:2017
|
Fire safety — Vocabulary |
EN 312:2010
|
Particleboards - Specifications |
ISO 7176-16:2012
|
Wheelchairs Part 16: Resistance to ignition of postural support devices |
ISO 9225:2012
|
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
ISO 24473:2008
|
Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
ISO 12952-4:1998
|
Textiles Burning behaviour of bedding items Part 4: Specific test methods for the ignitability by a small open flame |
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
IEC TS 60695-7-50:2002
|
Fire hazard testing - Part 7-50: Toxicity of fire effluent - Estimation of toxic potency - Apparatus and test method |
ISO 340:2013
|
Conveyor belts Laboratory scale flammability characteristics Requirements and test method |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
ISO 3008:2007
|
Fire-resistance tests Door and shutter assemblies |
IEC 60332-1-2:2004+AMD1:2015 CSV
|
Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
ISO 15025:2016
|
Protective clothing Protection against flame Method of test for limited flame spread |
ISO/TS 5658-1:2006
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread |
ISO 11907-2:1995
|
Plastics Smoke generation Determination of the corrosivity of fire effluents Part 2: Static method |
ISO/TR 5659-3:1999
|
Plastics Smoke generation Part 3: Determination of optical density by a dynamic-flow method |
ISO 12952-2:2010
|
Textiles Assessment of the ignitability of bedding items Part 2: Ignition source: match-flame equivalent |
ISO 5660-4:2008
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 4: Measurement of heat release for determination of low levels of combustibility |
ISO 18906:2000
|
Imaging materials Photographic films Specifications for safety film |
ISO 11925-3:1997
|
Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
ISO 9772:2012
|
Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
ISO 390:1993
|
Products in fibre-reinforced cement Sampling and inspection |
ISO 11845:1995
|
Corrosion of metals and alloys General principles for corrosion testing |
ISO/TR 5660-3:2003
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement |
ISO/TR 13387-4:1999
|
Fire safety engineering Part 4: Initiation and development of fire and generation of fire effluents |
ISO 14696:2009
|
Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
IEC 60695-11-10:2013
|
Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
ASTM E 662 : 2017-02
|
TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
ISO 1887:2014
|
Textile glass Determination of combustible-matter content |
ISO/TS 19700:2016
|
Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace |
ISO 12952-1:2010
|
Textiles Assessment of the ignitability of bedding items Part 1: Ignition source: smouldering cigarette |
ISO 12952-3:1998
|
Textiles Burning behaviour of bedding items Part 3: General test methods fot the ignitability by a small open flame |
BS 7982:2001
|
Guidance on the environmental impact of large-scale fires involving plastics materials |
ISO 10062:2006
|
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) |
ISO/TR 16312-2:2007
|
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment Part 2: Evaluation of individual physical fire models |
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
ISO 834-1:1999
|
Fire-resistance tests Elements of building construction Part 1: General requirements |
ISO 11907-1:1998
|
Plastics Smoke generation Determination of the corrosivity of fire effluents Part 1: Guidance |
ISO 8124-2:2014
|
Safety of toys — Part 2: Flammability |
ISO 21367:2007
|
Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
IEC 61034-2:2005+AMD1:2013 CSV
|
Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
ISO 13927:2015
|
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector |
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
ISO 6941:2003
|
Textile fabrics Burning behaviour Measurement of flame spread properties of vertically oriented specimens |
ISO/TR 13387-5:1999
|
Fire safety engineering Part 5: Movement of fire effluents |
ISO 4589-1:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements |
ISO 11907-4:1998
|
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater |
ISO/IEC Guide 98-3:2008
|
Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
IEC TS 60695-5-3:2003
|
Fire hazard testing - Part 5-3: Corrosion damage effects of fire effluent - Leakage-current and metal-loss test method |