![header thumbnail](/images/publishers\iso_cover.gif)
ISO 3130:1975
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/publishers\iso_cover.gif)
Wood — Determination of moisture content for physical and mechanical tests
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
24-04-2019
English, French
01-11-1975
Specifies a method that determines, by weighing, the loss in mass of the test piece on drying to constant mass. Calculation of the loss in mass as a percentage of test piece mass after drying. Reference is made to ISO 3129.
DevelopmentNote |
Superseded by ISO 13061-1, but remains current. (10/2014)
|
DocumentType |
Standard
|
Pages |
2
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
Standards | Relationship |
NBN ISO 3130 : 1992 | Identical |
UNI ISO 3130 : 1985 | Identical |
BS 373:1957 | Similar to |
DIN 52183:1977-11 | Identical |
DIN 52183:1977-11 | Corresponds |
12/30263201 DC : 0 | BS EN 16449 - WOOD AND WOOD-BASED PRODUCTS - CALCULATION OF SEQUESTRATION OF ATMOSPHERIC CARBON DIOXIDE |
98/714980 DC : DRAFT SEP 98 | ISO/DIS 15601 - HAMMERS - TECHNICAL SPECIFICATIONS CONCERNING STEEL HAMMER HEADS - TEST PROCEDURES |
ISO 3345:1975 | Wood — Determination of ultimate tensile stress parallel to grain |
DIN EN 15737 E : 2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
BS EN 15737:2009 | Timber structures. Test methods. Torsional resistance of driving in screws |
10/30202133 DC : 0 | BS ISO 3129 - WOOD - SAMPLING METHODS AND GENERAL REQUIREMENTS FOR PHYSICAL AND MECHANICAL TESTING OF SMALL CLEAR WOOD SPECIMENS |
DIN EN 15736:2009-12 | Timber structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
98/105109 DC : DRAFT JUNE 1998 | PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY |
PREN 1383 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - PULL THROUGH RESISTANCE |
I.S. EN 335:2013 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD-BASED PRODUCTS |
NF ISO 15601 : 2000 | HAMMERS - TECHNICAL SPECIFICATIONS CONCERNING STEEL HAMMER HEADS - TEST PROCEDURES |
ISO 17959:2014 | General requirements for solid wood flooring |
UNI EN 594 : 2011 | TIMBER STRUCTURES - TEST METHODS - RACKING STRENGTH AND STIFFNESS OF TIMBER FRAME WALL PANELS |
ISO 8611-1:2011 | Pallets for materials handling Flat pallets Part 1: Test methods |
EN 12881-2:2005+A1:2008 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test |
EN 13545:2002 | Pallet superstructures - Pallet collars - Test methods and performance requirements |
UNI EN ISO 8611-1 : 2012 | PALLETS FOR MATERIALS HANDLING - FLAT PALLETS - PART 1: TEST METHODS |
14/30297198 DC : 0 | BS EN 1383 - TIMBER STRUCTURES - TEST METHODS - PULL THROUGH RESISTANCE |
ISO 8969:2011 | Timber structures Testing of punched metal plate fasteners and joints |
I.S. EN 335-1:2006 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 1: GENERAL |
04/30088576 DC : DRAFT OCT 2004 | EN 335-2 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 2: APPLICATION TO SOLID WOOD |
NFP 30 316 : 2009 | ROOFING AND WALL CLADDING - FASTENERS - DETERMINATION OF THE CHARACTERISTIC RESISTANCE OF THE ASSEMBLY - TEST METHOD FOR SHEARING BY TRANSVERSE TENSILE TESTING |
BS EN 335:2013 | Durability of wood and wood-based products. Use classes: definitions, application to solid wood and wood-based products |
ISO 7202:2012 | Fire protection Fire extinguishing media Powder |
BS ISO 3129:2012 | Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
07/30154920 DC : 0 | BS ISO 7165 - FIRE FIGHTING - PORTABLE FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
UNI EN 15737 : 2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
I.S. EN 15737:2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
ISO 3129:2012 | Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
UNE-EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
BS EN 20-2:1993 | Wood preservatives. Determination of the protective effectiveness against Lyctus brunneus (Stephens) Application by impregnation (laboratory method) |
DIN EN ISO 12777-3:2003-06 | METHODS OF TEST FOR PALLET JOINTS - PART 3: DETERMINATION OF STRENGTH OF PALLET JOINTS |
I.S. EN 594:2011 | TIMBER STRUCTURES - TEST METHODS - RACKING STRENGTH AND STIFFNESS OF TIMBER FRAME WALL PANELS |
I.S. EN 12881-2:2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
I.S. EN ISO 8611-1:2012 | PALLETS FOR MATERIALS HANDLING - FLAT PALLETS - PART 1: TEST METHODS (ISO 8611-1:2011) |
BS 1892-1:1986 | Gymnasium equipment Specification of general requirements |
04/30088573 DC : DRAFT OCT 2004 | EN 335-1 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 1: GENERAL |
I.S. EN 20-1:1993 | WOOD PRESERVATIVES - DETERMINATION OF THE PROTECTIVE EFFECTIVENESS AGAINST LYCTUS BRUNNEUS (STEPHENS) - APPLICATION BY SURFACE TREATMENT (LABORATORY METHOD) |
ISO 22157-1:2004 | Bamboo Determination of physical and mechanical properties Part 1: Requirements |
I.S. EN 335-2:2006 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - DEFINITION OF USE CLASSES - PART 2: APPLICATION TO SOLID WOOD |
14/30297195 DC : 0 | BS EN 1382 - TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS |
ISO 10984-2:2009 | Timber structures Dowel-type fasteners Part 2: Determination of embedding strength |
07/30159634 DC : 0 | BS ISO 8611-1 - PALLETS FOR MATERIALS HANDLING - FLAT PALLETS - PART 1: TEST METHODS |
UNE-EN 15736:2010 | Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
ISO 13061-1:2014 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests |
17/30324716 DC : 0 | BS ISO 22157-1 - BAMBOO STRUCTURES - DETERMINATION OF PHYSICAL AND MECHANICAL PROPERTIES OF BAMBOO CULMS - PART 1: TEST METHODS |
17/30316733 DC : 0 | BS ISO 16696-1 - TIMBER STRUCTURES - CROSS LAMINATED TIMBER - PART 1: COMPONENT PERFORMANCE AND PRODUCTION REQUIREMENTS |
11/30247793 DC : 0 | BS EN 335 - DURABILITY OF WOOD AND WOOD- BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD BASED PANELS |
ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
UNI EN 15736 : 2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
DIN EN 12881-2 E : 2009 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
DIN EN 594:2011-09 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
BS EN 335-1:2006 | Durabiltity of wood and wood-based products. Definitions of use classes General |
BS EN ISO 12777-3:2002 | Methods of test for pallet joints Determination of strength of pallet joints |
DIN EN 12881-2:2009-10 | Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test (includes Amendment A1:2009) |
UNE-EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
UNI EN 12881-2 : 2008 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
ISO 9087:1998 | Wood - Determination of nail and screw holding power under axial load application |
07/30173621 DC : 0 | BS EN 15737 - TIMBER STRUCTURES - TEST METHODS - TORSIONAL STRENGTH AND RESISTANCE TO DRIVING OF SCREWS |
14/30297201 DC : 0 | BS EN 1381 - TIMBER STRUCTURES - TEST METHODS - LOAD BEARING STAPLED JOINTS |
BS 1990-1:1984 | Wood poles for overhead power and telecommunication lines Specification for softwood poles |
UNI EN 335 : 2013 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - USE CLASSES: DEFINITIONS, APPLICATION TO SOLID WOOD AND WOOD-BASED PRODUCTS |
11/30237800 DC : 0 | BS ISO 7202 - FIRE PROTECTION - FIRE EXTINGUISHING MEDIA - POWDER |
09/30195729 DC : 0 | BS ISO 8969 - TIMBER STRUCTURES - TESTING OF PUNCHED METAL PLATE FASTERNERS AND JOINTS |
DIN EN 335:2013-06 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
09/30191937 DC : 0 | BS ISO 20152-1 - TIMBER STRUCTURES - BOND PERFORMANCE OF ADHESIVES - PART 1: BASIC REQUIREMENTS |
BS 5820:1979 | Methods of test for determination of certain physical and mechanical properties of timber in structural sizes |
ISO 20152-2:2011 | Timber structures — Bond performance of adhesives — Part 2: Additional requirements |
ISO 17754:2014 | Timber structures Test methods Torsional resistance of driving in screws |
I.S. EN 15736:2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
PREN 1381 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - LOAD BEARING STAPLED JOINTS |
PREN 1382 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS |
ISO 15601:2000 | Hammers — Technical specifications concerning steel hammer heads — Test procedures |
ISO 7165:2017 | Fire fighting — Portable fire extinguishers — Performance and construction |
DIN EN ISO 8611-1 E : 2012 | PALLETS FOR MATERIALS HANDLING - FLAT PALLETS - PART 1: TEST METHODS (ISO 8611-1:2011) |
ISO 12777-3:2002 | Methods of test for pallet joints — Part 3: Determination of strength of pallet joints |
ISO 12777-2:2000 | Methods of test for pallet joints — Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples |
BS EN ISO 8611-1:2012 | Pallets for materials handling. Flat pallets Test methods |
BS EN ISO 12777-2:2000 | Methods of test for pallet joints Determination of withdrawal and head pull-through resistance of pallet nails and staples |
UNE-EN ISO 8611-1:2013 | Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2011) |
BS EN 275:1992 | Wood preservatives. Determination of the protective effectiveness against marine borers |
BS EN 13545:2002 | Pallet superstructures. Pallet collars. Test methods and performance requirements |
EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
EN ISO 12777-2 : 2000 | METHODS OF TEST FOR PALLET JOINTS - PART 2: DETERMINATION OF WITHDRAWAL AND HEAD PULL-THROUGH RESISTANCE OF PALLET NAILS AND STAPLES |
EN 15737:2009 | Timber Structures - Test methods - Torsional resistance of driving in screws |
EN 20-1:1992 | Wood preservatives - Determination of the protective effectiveness against Lyctus Brunneus (Stephens) - Part 1: Application by surface treatment (laboratory method) |
EN 275:1992 | Wood preservatives - Determination of the protective effectiveness against marine borers |
EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
EN 15736:2009 | Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
EN ISO 12777-3 : 2002 | METHODS OF TEST FOR PALLET JOINTS - PART 3: DETERMINATION OF STRENGTH OF PALLET JOINTS |
DIN EN 15736 E : 2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
DD ENV 1390:1995 | Wood preservatives. Determination of the eradicant action against Hylotrupes bajulus (Linnaeus) larvae. Laboratory method |
DIN EN 15737:2009-12 | Timber structures - Test methods - Torsional resistance of driving in screws |
I.S. EN 12509:2002 | TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT |
BS EN 15736:2009 | Timber structures. Test methods. Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
UNE-EN 15737:2010 | Timber Structures - Test methods - Torsional resistance of driving in screws |
14/30304101 DC : 0 | BS EN 16784 - TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF THE LONG TERM BEHAVIOUR OF COATED AND UNCOATED DOWEL-TYPE FASTENERS |
16/30303560 DC : 0 | BS ISO 19323 - TIMBER STRUCTURES - JOIST HANGERS - TEST METHODS |
17/30358406 DC | BS ISO 7202. Fire protection. Fire extinguishing media. Powder |
07/30152875 DC : 0 | BS EN 15736 - TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS |
I.S. EN ISO 12215-3:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 3: MATERIALS: STEEL, ALUMINIUM ALLOYS, WOOD, OTHER MATERIALS |
NF EN 15736 : 2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
NF EN 15737 : 2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
EN ISO 12215-3:2002 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
BS EN ISO 12215-3:2002 | Small craft. Hull construction and scantlings Materials. Steel, aluminium alloys, wood, other materials |
ISO 20152-1:2010 | Timber structures — Bond performance of adhesives — Part 1: Basic requirements |
BS EN 12509:2001 | Timber poles for overhead lines. Test methods. Determination of modulus of elasticity, bending strength, density and moisture content |
BS EN 594:2011 | Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels |
BS EN 12881-2 : 2005 | CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST |
BS EN 335-2:2006 | Durability of wood and wood-based products. Definition of use classes Application to solid wood |
DIN EN ISO 8611-1:2012-10 | Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2011) |
EN 12509 : 2001 | TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT |
EN ISO 8611-1:2012 | Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2011) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.