ISO 3310-2:2013
Current
Current
The latest, up-to-date edition.
Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
13-08-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3310-2:2013 specifies the technical requirements and corresponding test methods for test sieves of perforated metal plate.
It applies to test sieves having round holes, with sizes from 125 mm down to 1 mm, or square holes, with sizes from 125 mm down to 4 mm, in accordance with ISO 565.
| Committee |
ISO/TC 24/SC 8
|
| DevelopmentNote |
Supersedes ISO/DIS 3310-2. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF ISO 3310-2 : 2019 | Identical |
| BS ISO 3310-2:2013 | Identical |
| DIN ISO 3310-2:2015-07 | Identical |
| PN ISO 3310-2 : 2000 | Identical |
| BS 410:1986 | Similar to |
| UNE 7050-4:1997 | Identical |
| NF ISO 3310-2 : 1999 | Identical |
| NEN ISO 3310-2 : 1999 | Identical |
| PREN 932-5 : DRAFT 2009 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| DIN EN 15210-1:2010-04 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| DD CEN/TS 15415:2006 | Solid recovered fuels. Determination of particle size and particle size distribution by screen method |
| BS EN 60079-5:2015 | Explosive atmospheres Equipment protection by powder filling \'q\' |
| 07/30111991 DC : 0 | BS 8472 - PACKAGING - METHOD FOR THE DETERMINATION OF COMPOSTABILITY (INCLUDING BIODEGRADABILITY AND ECO-TOXICITY) OF PACKAGING MATERIALS BASED ON OXO-BIODEGRADABLE PLASTICS |
| 13/30275450 DC : 0 | BS EN ISO 17831-1 - SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| 16/30303043 DC : DRAFT MAR 2016 | BS EN ISO 19743 - SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGE THAN 3,15 MM |
| BS EN 15415-2:2012 | Solid recovered fuels. Determination of particle size distribution Maximum projected length method (manual) for large dimension particles |
| 07/30147937 DC : 0 | BS ISO 4701 - IRON ORES AND DIRECT REDUCED IRON - DETERMINATION OF SIZE DISTRIBUTION BY SIEVING |
| 15/30286347 DC : 0 | BS EN ISO 18846 - SOLID BIOFUELS - DETERMINATION OF FINES CONTENT IN QUANTITIES OF PELLETS |
| 12/30267444 DC : 0 | BS EN 60079-5 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q' |
| BS 7755-5.4:1998 | Soil quality. Physical methods Method by sieving and sedimentation |
| I.S. EN 15149-1:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| 13/30265121 DC : 0 | BS ISO 13930 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY DYNAMIC METHOD |
| 05/30132135 DC : DRAFT APR 2005 | ISO 4696-2 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 2: REDUCTION WITH CO AND N[2] |
| 13/30265109 DC : 0 | BS ISO 4696-1 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 1: REDUCTION WITH CO, CO[2], H[2] AND N[2] |
| DD CEN/TS 15210-1:2005 | Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes Pellets |
| 13/30258710 DC : 0 | BS 1881-124 - TESTING CONCRETE - PART 124: METHODS FOR ANALYSIS OF HARDENED CONCRETE |
| UNE-EN ISO 17827-1:2016 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016) |
| BS EN ISO 18846:2016 | Solid biofuels. Determination of fines content in quantities of pellets |
| 15/30275869 DC : 0 | BS EN ISO 17827-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE |
| BS 6043-2.9:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode coke - Determination of particle size distribution |
| S.R. CEN TS 15639:2010 | SOLID RECOVERED FUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS |
| BS EN 15210-1:2009 | Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets |
| BS EN ISO 17831-1:2015 | Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets |
| UNE-EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| 05/30063596 DC : DRAFT JULY 2005 | EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT IMPACT ON SOIL PH - SOIL INCUBATION METHOD |
| PREN 12948 : DRAFT 2009 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| DIN EN ISO 14688-2:2016-07 (Draft) | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION (ISO 14688-2:2004 + AMD 1:2013) |
| PREN 12697-18 : DRAFT 2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE |
| I.S. EN 61394:2011 | OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS (IEC 61394:2011) |
| S.R. CEN/TR 15149-3:2014 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: ROTARY SCREEN METHOD |
| I.S. EN ISO 17827-1:2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016) |
| I.S. EN 16455:2014 | CONSERVATION OF CULTURAL HERITAGE - EXTRACTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE |
| I.S. CEN TS 15210-1:2006 | SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| PREN 14243-3 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| PREN 13383-2 : DRAFT 2017 | ARMOURSTONE - PART 2: TEST METHODS |
| UNE-EN ISO 18846:2017 | Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016) |
| UNI 11531-1 : 2014 | CONSTRUCTION AND MAINTENANCE FOR INFRASTRUCTURE CIVIL BUILDING - CRITERIA FOR MATERIALS USE - PART 1: SOILS AND MIXTURES OF UNBOUND AGGREGATES |
| DD CEN/TS 15639:2010 | Solid recovered fuels. Determination of mechanical durability of pellets |
| UNE-EN 15415-1:2012 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| UNI EN 15149-2 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| UNE-EN ISO 17829:2016 | Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015) |
| ISO 11323:2010 | Iron ore and direct reduced iron Vocabulary |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| DIN EN 12697-18:2015-12 (Draft) | BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE |
| UNE-EN 772-5:2016 | Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units |
| CEN/TS 15210-1:2005 | Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| EN 15149-1:2010 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| DIN EN 12697-1:2012-09 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| EN 15210-1:2009 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| CEN/TS 15149-2:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| CEN/TS 15149-3:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method |
| CEN/TS 15639:2010 | Solid recovered fuels - Determination of mechanical durability of pellets |
| EN 15149-2:2010 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| DIN EN 12697-18:2017-09 | BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE |
| EN 15415-1:2011 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| CEN/TS 14243:2010 | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| CEN/TR 15149-3:2014 | Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method |
| EN 13383-2:2013 | Armourstone - Part 2: Test methods |
| CEN/TS 15149-1:2006 | Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above |
| EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
| EN 12697-18:2017 | Bituminous mixtures - Test methods - Part 18: Binder drainage |
| UNI EN 16455 : 2014 | CONSERVATION OF CULTURAL HERITAGE - DISSOLUTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE |
| S.R. CEN TS 15149-1:2006 | SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND ABOVE |
| 14/30295181 DC : 0 | BS EN ISO 17892-4 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| BIS IS/ISO 15968 : 2000 | DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI) |
| UNE-EN ISO 5223:2016 | Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999) |
| DIN EN ISO 17892-4:2017-04 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 17892-4:2016) |
| 10/30219012 DC : 0 | BS EN 15415-1 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| DIN EN ISO 17827-1:2016-10 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016) |
| ISO 8371:2015 | Iron ores for blast furnace feedstocks — Determination of the decrepitation index |
| I.S. EN 15415-2:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| DIN 24043:1981-10 | OBLONG HOHLE PERFORATED PLATES - DIMENSIONS |
| DIN EN ISO 17827-2:2016-10 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016) |
| 05/30132752 DC : DRAFT APR 2005 | ISO 15968 - DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI) |
| PREN 15415-3 : DRAFT 2010 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| UNE-EN ISO 17831-1:2016 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015) |
| BS ISO 4701:2017 | Iron ores and direct reduced iron. Determination of size distribution by sieving |
| 18/30371125 DC : DRAFT APR 2018 | BS EN ISO 8130-1 - COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING |
| BS ISO 11257:2015 | Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization |
| UNI EN ISO 14688-2 : 2013 | GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION |
| BS EN ISO 19743:2017 | Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm |
| 13/30265106 DC : 0 | BS ISO 3271 - IRON ORES FOR BLAST FURNACE AND DIRECT REDUCTION FEEDSTOCKS - DETERMINATION OF THE TUMBLE AND ABRASION INDICES |
| BS EN 16455:2014 | Conservation of cultural heritage. Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage |
| NF EN 12350-11 : 2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| BS EN 772-5:2016 | Methods of test for masonry units Determination of the active soluble salts content of clay masonry units |
| BS EN ISO 17827-1:2016 | Solid biofuels. Determination of particle size distribution for uncompressed fuels Oscillating screen method using sieves with apertures of 3,15 mm and above |
| 09/30195711 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| ISO 3271:2015 | Iron ores for blast furnace and direct reduction feedstocks Determination of the tumble and abrasion indices |
| BS ISO 3271:2015 | Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices |
| PREN 14984 : DRAFT 2014 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| 05/30132748 DC : DRAFT APR 2005 | ISO 15967 - DIRECT REDUCED IRON - DETERMINATION OF THE TUMBLE AND ABRASION INDICES OF HOT BRIQUETTED IRON (HBI) |
| 09/30186079 DC : 0 | BS EN 12948 - LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| 05/30132745 DC : DRAFT APR 2005 | ISO 13930 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY DYNAMIC METHOD |
| DIN 4226-2:2002-02 | AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES |
| I.S. EN ISO 17827-2:2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016) |
| I.S. EN ISO 18846:2016 | SOLID BIOFUELS - DETERMINATION OF FINES CONTENT IN QUANTITIES OF PELLETS (ISO 18846:2016) |
| I.S. EN ISO 17892-4:2016 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 7892-4:2016) |
| ISO 2395:1990 | Test sieves and test sieving — Vocabulary |
| I.S. EN ISO 19743:2017 | SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGER THAN 3,15 MM (ISO 19743:2017) |
| DIN EN ISO 19743:2016-04 (Draft) | SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGER THAN 3,15 MM (ISO 19743:2017) |
| CAN/CSA-ISO 18846:17 | Solid biofuels — Determination of fines content in samples of pellets (Adopted ISO 18846:2016, first edition, 2016-09-01) |
| DIN EN 1367-5:2011-04 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| UNE-EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| BS EN 933-1:2012 | Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method |
| BS EN 933-2:1996 | Tests for geometrical properties of aggregates Determination of particle size distribution. Test sieves, nominal size of apertures |
| I.S. EN 932-5:2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION |
| I.S. EN 12697-18:2017 | BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE |
| I.S. EN 933-1:2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
| I.S. EN 14984:2016 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| I.S. EN 12948:2010 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| I.S. EN 1367-5:2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| BS 598-102:2003 | Sampling and examination of bituminous mixtures for roads and other paved areas Analytical test methods |
| BS 1016-108.1:1996 | Methods for analysis and testing of coal and coke. Tests special to coke Determination of shatter indices |
| BS 6219:1988 | Specification for test sieves for cereals |
| BS 4987-1:2003 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
| BS 594-1:2003 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 594-1:2005 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 6219:1996 | Test sieves for cereals |
| BS 3406-2:1984 | Methods for determination of particle size distribution Recommendations for gravitational liquid sedimentation methods for powders and suspensions |
| BS 4987-1:2005 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
| ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
| PD CEN/TR 15149-3:2014 | Solid biofuels. Determination of particle size distribution Rotary screen method |
| DIN EN 15149-2:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| PREN 15415-2 : DRAFT 2010 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| 17/30358395 DC | BS ISO 1920-13. Testing of concrete Part 13. Properties of fresh self compacting concrete |
| 01/105764 DC : DRAFT JULY 2001 | ISO/DIS 14688-2 - GEOTECHNICAL ENGINEERING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: CLASSIFICATION AND QUANTIFICATION |
| DIN EN 15415-3:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| BS ISO 3082:2017 | Iron ores. Sampling and sample preparation procedures |
| DIN EN 16455:2014-12 | CONSERVATION OF CULTURAL HERITAGE - EXTRACTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE |
| PREN 15210-1 : DRAFT 2009 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| BS EN ISO 17892-4:2016 | Geotechnical investigation and testing. Laboratory testing of soil Determination of particle size distribution |
| I.S. EN 13055-1:2002 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| 05/30132739 DC : DRAFT APR 2005 | ISO 11257 - IRON ORES FOR SHAFT DIRECT-REDUCTION FEEDSTOCKS - DETERMINATION OF THE LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDEX AND DEGREE OF METALLIZATION |
| BS ISO 11277:2009 | Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation |
| CEI EN 61394 : 2012 | OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS |
| DIN EN ISO 17827-1 E : 2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016) |
| 10/30219095 DC : 0 | BS EN 15149-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: HORIZONTAL SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| BS EN 15415-3:2012 | Solid recovered fuels. Determination of particle size distribution Method by image analysis for large dimension particles |
| UNI CEN/TS 15639 : 2010 | SOLID RECOVERED FUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS |
| 07/30166893 DC : 0 | BS EN 61394 - OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY STEEL BARE CONDUCTORS |
| DIN EN ISO 17827-2 E : 2016 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016) |
| 13/30265118 DC : 0 | BS ISO 11257 - IRON ORES FOR SHAFT DIRECT-REDUCTION FEEDSTOCKS - DETERMINATION OF THE LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDEX AND DEGREE OF METALLIZATION |
| I.S. EN 15415-3:2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| BS EN 15149-1:2010 | Solid biofuels. Determination of particle size distribution Oscillating screen method using sieve apertures of 1 mm and above |
| BS ISO 10836:1994 | Iron ores. Method of sampling and sample preparation for physical testing |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| DIN EN ISO 17831-1:2016-05 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015) |
| 07/30164932 DC : 0 | BS EN 12350-11 - TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| DD CEN/TS 15149-3:2006 | Solid biofuels. Methods for the determination of particle size distribution Rotary screen method |
| BS ISO 1953:2015 | Hard coal. Size analysis by sieving |
| UNE-EN 60079-5:2016 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| BS ISO 13930:2015 | Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by dynamic method |
| PD 6682-9:2003 | Aggregates Guidance on the use of European test method standards |
| 15/30301564 DC : 0 | BS ISO 15968 - DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI) |
| CAN/CSA-ISO 17827-1:17 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE |
| DD CEN/TS 14243:2010 | Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| BS ISO 18899:2013 | Rubber. Guide to the calibration of test equipment |
| DIN EN 15415-1:2011-11 | Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles |
| I.S. CEN TS 15415:2006 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SCREEN METHOD |
| BS EN ISO 17829:2015 | Solid biofuels. Determination of length and diameter of pellets |
| NF EN 15210-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| I.S. CEN ISO TS 17892-4:2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| ISO 2325:1986 | Coke Size analysis (Nominal top size 20 mm or less) |
| I.S. EN ISO 17831-1:2015 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015) |
| I.S. EN 772-5:2016 | METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS |
| NF EN 15415-1 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| UNI EN 15149-1 : 2011 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| ONORM EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
| ISO 4696-1:2015 | Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 1: Reduction with CO, CO2, H2 and N2 |
| ISO 16929:2013 | Plastics Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| ISO 4701:2017 | Iron ores and direct reduced iron Determination of size distribution by sieving |
| DIN EN 932-5:2012-05 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| DIN EN 933-1:2012-03 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| DIN EN 12948:2011-02 | Liming materials - Determination of size distribution by dry and wet sieving |
| BS EN 14045:2003 | Packaging. Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
| BS EN 13383-2:2013 | Armourstone Test methods |
| DIN EN 14984:2016-10 | LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| ISO 17827-1:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above |
| UNE-CEN/TS 14243:2012 EX | Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities |
| EN 933-2:1995 | Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures |
| EN ISO 17829:2015 | Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015) |
| UNI CEN/TS 14243 : 2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| UNI EN 933-1 : 2012 | TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD |
| UNI EN 1367-5 : 2011 | TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK |
| UNI EN 12948 : 2011 | LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING |
| UNI EN 932-5 : 2012 | TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| UNI EN 13383-2 : 2013 | ARMOURSTONE - PART 2: TEST METHODS |
| 04/30091864 DC : DRAFT JUL 2004 | ISO 22498 - PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - PARTICLE SIZE DETERMINATION BY MECHANICAL SIEVING |
| I.S. EN ISO 5223:2015 | TEST SIEVES FOR CEREALS (ISO 5223:1995, INCLUDING AMENDMENT 1:1999) |
| BS EN ISO 17827-2:2016 | Solid biofuels. Determination of particle size distribution for uncompressed fuels Vibrating screen method using sieves with aperture of 3,15 mm and below |
| 17/30365077 DC : 0 | BS EN 14243-3 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS |
| BS ISO 8371:2015 | Iron ores for blast furnace feedstocks. Determination of the decrepitation index |
| DIN EN ISO 17829:2016-03 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015) |
| BS ISO 3093 : 2004 AMD 17028 | WHEAT, RYE AND RESPECTIVE FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN |
| BS 8471:2007 | Guide to particle sizing methods |
| 05/30132365 DC : DRAFT APR 2005 | ISO 8371 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF THE DECREPITATION INDEX |
| BS ISO 16929:2013 | Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test |
| ISO 13930:2015 | Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by dynamic method |
| UNI EN 15210-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| DIN EN ISO 5223:2016-05 | TEST SIEVES FOR CEREALS (ISO 5223:1995, INCLUDING AMENDMENT 1:1999) |
| UNI EN 15415-1 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| BS EN 61394:2011 | Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
| 15/30328802 DC : 0 | BS EN 12697-18 - BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE |
| BS ISO 15968:2016 | Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI) |
| BS ISO 15967:2007 | Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI) |
| 15/30275872 DC : 0 | BS EN ISO 17827-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW |
| 09/30186154 DC : 0 | BS ISO 11323 - IRON ORE AND DIRECT REDUCED IRON - VOCABULARY |
| BS ISO 4696-2:2015 | Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method Reduction with CO and N2 |
| 17/30340672 DC : 0 | BS EN ISO 17892-12 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF LIQUID AND PLASTIC TESTS |
| DIN EN 15149-1:2011-01 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| UNI EN 12350-11 : 2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| BS EN 12350-11:2010 | Testing fresh concrete Self-compacting concrete. Sieve segregation test |
| BS ISO 11323:2010 | Iron ore and direct reduced iron. Vocabulary |
| BS EN 12697-2:2015 | Bituminous mixtures. Test methods Determination of particle size distribution |
| 13/30265115 DC : 0 | BS ISO 8371 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF THE DECREPITATION INDEX |
| 16/30301962 DC : 0 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| 09/30205556 DC : 0 | BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION |
| BS EN ISO 5223:2015 | Test sieves for cereals |
| 09/30198721 DC : 0 | BS EN 15210-1 - SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| BS 1016-110.1:1996 | Methods for analysis and testing of coal and coke. Size analysis of coke Nominal top size greater than 20 mm |
| BS ISO 4696-1:2015 | Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method Reduction with CO, CO2, H2 and N2 |
| UNI EN 15415-2 : 2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| DIN 24042:1981-10 | SQUARE HOLE PERFORATED PLATES - DIMENSIONS |
| DIN EN 12350-11:2010-12 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| UNE-EN 15149-1:2011 | Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above |
| ISO 11277:2009 | Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation |
| UNI CEN ISO/TS 17892-4 : 2005 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| I.S. EN 12350-11:2010 | TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST |
| ISO 4150:2011 | Green coffee or raw coffee — Size analysis — Manual and machine sieving |
| I.S. EN 12697-2:2015 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| ISO 6783:1982 | Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method |
| ISO 10836:1994 | Iron ores — Method of sampling and sample preparation for physical testing |
| PREN 14243-2 : DRAFT 2017 | MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| 17/30365074 DC : 0 | BS EN 14243-2 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT |
| UNE-EN ISO 17827-2:2016 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016) |
| ISO 15967:2007 | Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI) |
| ISO 4696-2:2015 | Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 2: Reduction with CO and N2 |
| ISO 18899:2013 | Rubber — Guide to the calibration of test equipment |
| S.R. CEN TS 15149-3:2006 | SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: ROTARY SCREEN METHOD |
| ISO 616:1995 | Coke Determination of shatter indices |
| ISO 17827-2:2016 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below |
| ISO/TS 17892-4:2004 | Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution |
| UNE-EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| BS EN 932-5:2012 | Tests for general properties of aggregates Common equipment and calibration |
| IEC 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
| ONORM EN 12697-1 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| UNE-EN 12697-1:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content |
| UNE-EN 932-5:2012 | Tests for general properties of aggregates - Part 5: Common equipment and calibration |
| UNE 56810 :2002 | Wood flooring. Installation. Specifications. |
| IEC 60079-5:2015 RLV | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| ISO 19743:2017 | Solid biofuels — Determination of content of heavy extraneous materials larger than 3,15 mm |
| BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
| ISO 17831-1:2015 | Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets |
| ISO 17829:2015 | Solid Biofuels Determination of length and diameter of pellets |
| UNI EN 12697-1 : 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| ISO 17892-4:2016 | Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution |
| BS EN 12697-1:2012 | Bituminous mixtures. Test methods for hot mix asphalt Soluble binder content |
| BS EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock |
| UNE-EN 12697-2:2015 | Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution |
| BS EN 12697-18:2017 | Bituminous mixtures. Test methods Binder drainage |
| I.S. EN 12697-1:2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| ISO 18846:2016 | Solid biofuels — Determination of fines content in quantities of pellets |
| BS EN 12948:2010 | Liming materials. Determination of size distribution by dry and wet sieving |
| EN ISO 19743:2017 | Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017) |
| EN ISO 18846:2016 | Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016) |
| EN 1367-5:2011 | Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock |
| EN 12948:2010 | Liming materials - Determination of size distribution by dry and wet sieving |
| EN 14045:2003 | Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions |
| EN 15415-2:2012 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| EN 16455:2014 | Conservation of cultural heritage - Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage |
| EN ISO/TS 17892-4 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| EN 20340 : 1993 | CONVEYOR BELTS - FLAME RETARDATION - SPECIFICATIONS AND TEST METHOD |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 15415-3:2012 | Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles |
| EN ISO 17827-2:2016 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016) |
| EN ISO 17827-1:2016 | Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016) |
| EN 14984:2016 | Liming materials - Determination of product effect on soil pH - Soil incubation method |
| EN ISO 17831-1:2015 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015) |
| EN ISO 17892-4:2016 | Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016) |
| BS EN 15149-2:2010 | Solid biofuels. Determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below |
| I.S. EN 15149-2:2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| 10/30230003 DC : 0 | BS EN 15415-2 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES |
| 08/30147925 DC : DRAFT JAN 2008 | BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES |
| 17/30345777 DC : 0 | BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS |
| BS EN 15415-1:2011 | Solid recovered fuels. Determination of particle size distribution Screen method for small dimension particles |
| 10/30219097 DC : 0 | BS EN 15149-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| 14/30309972 DC : 0 | BS EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD |
| BS 1016-109:1995 | Methods for analysis and testing of coal and coke Size analysis of coal |
| 09/30202313 DC : 0 | BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS |
| BS ISO 4150:2011 | Green coffee or raw coffee. Size analysis. Manual and machine sieving |
| 13/30265112 DC : 0 | BS ISO 4696-2 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 2: REDUCTION WITH CO AND N[2] |
| ISO 11257:2015 | Iron ores for shaft direct-reduction feedstocks Determination of the low-temperature reduction-disintegration index and degree of metallization |
| 12/30263600 DC : 0 | BS EN 16455 - CONSERVATION OF CULTURAL HERITAGE - DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN CULTURAL HERITAGE |
| CAN/CSA-ISO 17827-2:17 | Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (Adopted ISO 17827-2:2016, first edition, 2016-05-15) |
| NF EN 15149-2 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| PD IEC 61394:1997 | Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors |
| DIN EN 12697-2:2015-07 | BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| 05/30132129 DC : DRAFT APR 2005 | ISO 4696-1 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 1: REDUCTION WITH CO, CO[2], H[2] AND N[2] |
| 09/30197220 DC : 0 | BS ISO 4150 - GREEN COFFEE - SIZE ANALYSIS - MANUAL AND MACHINE SIEVING |
| 10/30230006 DC : 0 | BS EN 15415-3 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| DD CEN/TS 15149-1:2006 | Solid biofuels. Methods for the determination of particle size distribution Oscillating screen method using sieve apertures of 3,15 mm and above |
| DD CEN/TS 15149-2:2006 | Solid biofuels. Methods for the determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below |
| DIN EN 15415-2:2012-06 | Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles |
| I.S. EN 15415-1:2011 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES |
| UNE-EN 15149-2:2011 | Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below |
| UNE-EN 15210-1:2010 | Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets |
| I.S. EN ISO 17829:2015 | SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015) |
| I.S. EN 15210-1:2009 | SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS |
| I.S. EN 60079-5:2015 | EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q' |
| UNI EN 15415-3 : 2012 | SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES |
| ISO 1953:2015 | Hard coal — Size analysis by sieving |
| S.R. CEN TS 15149-2:2006 | SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW |
| S.R. CEN TS 14243:2010 | MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES |
| ISO 15968:2016 | Direct reduced iron Determination of apparent density and water absorption of hot briquetted iron (HBI) |
| NF EN 15149-1 : 2010 | SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE |
| UNE-EN 16455:2016 | Conservation of cultural heritage - Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage |
| BS EN 14984:2016 | Liming materials. Determination of product effect on soil pH. Soil incubation method |
| BS EN 20340:1993 | Conveyor belts. Flame retardation. Specifications and test method |
| EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| EN 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
| DIN 4924:1998-08 | SANDS AND GRAVELS FOR WELL CONSTRUCTION - REQUIREMENTS AND TESTING |
| DIN EN 13055-1:2002-08 | LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
| DIN ISO 11277:2002-08 | Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + Corr 1:2002) |
| CEN/TS 15415:2006 | Solid recovered fuels - Determination of particle size distribution by screen method |
| EN 60079-5:2015 | Explosive atmospheres - Part 5: Equipment protection by powder filling "q" |
| DIN EN 14045:2003-06 | PACKAGING - EVALUATION OF THE DISINTEGRATION OF PACKAGING MATERIALS IN PRACTICAL ORIENTED TESTS UNDER DEFINED COMPOSTING CONDITIONS |
| ISO 2395:1990 | Test sieves and test sieving — Vocabulary |
| AS 4133.0:2019 | Methods of testing rocks for engineering purposes General requirements and list of methods |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 2591-1:1988 | Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate |
| AS 1289.4.1.1:2019 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method |
| AS 1141.11.2:2019 | Methods for sampling and testing aggregates Particle size distribution for vision sizing systems |
| AS 4439.3:2019 | Wastes, sediments and contaminated soils Preparation of leachates - Bottle leaching procedure |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| AS 1289.4.2.1:2020 | Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.