ISO 3506-4:2009
Current
Current
The latest, up-to-date edition.
Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
29-10-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 3506-4:2009 specifies the mechanical properties of tapping screws made of austenitic, martensitic and ferritic steel grades of corrosion-resistant stainless steels, when tested over an ambient temperature range of 10 C to 35 C. Properties vary at higher or lower temperatures.
It applies to tapping screws with threads from ST2,2 up to and including ST8, in accordance with ISO 1478.
It does not apply to screws with special properties such as weldability.
| DevelopmentNote |
Supersedes ISO/DIS 3506-4. (11/2009)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| GOST R ISO 3506-4 : 2009 | Identical |
| NF EN ISO 3506-4 : 2010 | Identical |
| UNE-EN ISO 3506-4:2010 | Identical |
| NBN EN ISO 3506-4 : 2010 | Identical |
| NEN EN ISO 3506-4 : 2009 | Identical |
| NS EN ISO 3506-4 : 2009 | Identical |
| I.S. EN ISO 3506-4:2009 | Identical |
| SN EN ISO 3506-4 : 2010 | Identical |
| UNI EN ISO 3506-4 : 2010 | Identical |
| BS EN ISO 3506-4:2009 | Identical |
| EN ISO 3506-4:2009 | Identical |
| DIN EN ISO 3506-4:2010-04 | Identical |
| JIS B 1054-4:2013 | Identical |
| IS 1367 : Part 14 : Sec 4 : 2023 | Identical |
| PN EN ISO 3506-4 : 2009 | Identical |
| 11/30239640 DC : 0 | BS ISO 10509 - HEXAGON FLANGE HEAD TAPPING SCREWS |
| DIN EN ISO 1479:2011-10 | Hexagon head tapping screws (ISO 1479:2011) |
| 16/30341790 DC : 0 | BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| NF EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| DIN EN ISO 1483:2011-10 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| IEC 60335-2-37:2017 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers |
| BS EN ISO 1479:2011 | Hexagon head tapping screws |
| BS EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| BS EN ISO 1481:2011 | Slotted pan head tapping screws |
| I.S. EN ISO 1482:2011 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| DIN EN ISO 16048:2003-06 | PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS |
| I.S. EN ISO 7053:2011 | HEXAGON WASHER HEAD TAPPING SCREWS |
| 09/30208230 DC : 0 | BS ISO 1483 - SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| 09/30208248 DC : 0 | BS ISO 7053 - HEXAGON WASHER HEAD TAPPING SCREWS |
| PREN ISO 1482 : DRAFT 2009 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| 09/30208224 DC : 0 | BS ISO 1481 - SLOTTED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 7051:2011-11 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| DIN EN ISO 1481:2011-10 | Slotted pan head tapping screws (ISO 1481:2011) |
| 09/30208239 DC : 0 | BS ISO 7049 - CROSS RECESSED PAN HEAD TAPPING SCREWS |
| ISO 7053:2011 | Hexagon washer head tapping screws |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| UNE-EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| UNE-EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| BS EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| ISO 7049:2011 | Cross-recessed pan head tapping screws |
| I.S. EN ISO 7049:2011 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| I.S. EN ISO 1483:2011 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 7051:2011 | CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| I.S. EN ISO 1479:2011 | HEXAGON HEAD TAPPING SCREWS |
| I.S. EN ISO 7050:2011 | CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| I.S. EN ISO 1481:2011 | SLOTTED PAN HEAD TAPPING SCREWS |
| IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
| 18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
| 16/30341798 DC : 0 | BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 16/30341810 DC : 0 | BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
| 09/30208242 DC : 0 | BS ISO 7050 - CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| BS EN ISO 7053:2011 | Hexagon washer head tapping screws |
| ISO 10509:2012 | Hexagon flange head tapping screws |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| UNI EN ISO 7053 : 2012 | HEXAGON WASHER HEAD TAPPING SCREWS |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| UNE-EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| BS EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
| IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
| UNE-EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| UNI EN ISO 7051 : 2012 | CROSS-RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| UNI EN ISO 1483 : 2012 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| UNI EN ISO 1482 : 2012 | SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| UNI EN ISO 1481 : 2012 | SLOTTED PAN HEAD TAPPING SCREWS |
| UNI EN ISO 1479 : 2012 | HEXAGON HEAD TAPPING SCREWS |
| UNI EN ISO 7050 : 2012 | CROSS-RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| UNI EN ISO 7049 : 2012 | CROSS-RECESSED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 7050:2011-11 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| PREN ISO 1481 : DRAFT 2009 | SLOTTED PAN HEAD TAPPING SCREWS |
| DIN EN ISO 1482:2011-10 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| ONORM EN ISO 7053 : 2011 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| PREN ISO 7050 : DRAFT 2009 | CROSS RECESSED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| DIN EN ISO 7049:2011-11 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| PREN ISO 7051 : DRAFT 2009 | CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| PREN ISO 7049 : DRAFT 2009 | CROSS RECESSED PAN HEAD TAPPING SCREWS |
| IEC 60335-2-39:2012+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
| ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws |
| UNE-EN ISO 7049:2011 | Cross-recessed pan head tapping screws (ISO 7049:2011) |
| IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
| BS EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| BS EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
| ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws |
| UNE-EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| IEC 60335-2-99:2003+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
| IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
| ISO 1482:2011 | Slotted countersunk (flat) head tapping screws |
| BS EN ISO 7049:2011 | Cross-recessed pan head tapping screws |
| ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws |
| IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
| ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 1479:2011 | Hexagon head tapping screws |
| UNE-EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 1482:2011 | Slotted countersunk (flat) head tapping screws (ISO 1482:2011) |
| EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003) |
| EN ISO 1483:2011 | Slotted raised countersunk (oval) head tapping screws (ISO 1483:2011) |
| EN ISO 1479:2011 | Hexagon head tapping screws (ISO 1479:2011) |
| EN ISO 7051:2011 | Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) |
| EN ISO 1481:2011 | Slotted pan head tapping screws (ISO 1481:2011) |
| EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| EN ISO 7050:2011 | Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) |
| BS ISO 10509:2012 | Hexagon flange head tapping screws |
| 09/30208227 DC : 0 | BS ISO 1482 - SLOTTED COUNTERSUNK (FLAT) HEAD TAPPING SCREWS |
| 09/30208245 DC : 0 | BS ISO 7051 - CROSS RECESSED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| 16/30341794 DC : 0 | BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| DIN EN ISO 7053:2011-11 | HEXAGON WASHER HEAD TAPPING SCREWS (ISO 7053:2011) |
| UNE-EN ISO 7053:2011 | Hexagon washer head tapping screws (ISO 7053:2011) |
| PREN ISO 1483 : DRAFT 2009 | SLOTTED RAISED COUNTERSUNK (OVAL) HEAD TAPPING SCREWS |
| IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
| ISO 1481:2011 | Slotted pan head tapping screws |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 16426:2002 | Fasteners — Quality assurance system |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 1478:1999 | Tapping screws thread |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
| ISO 4954:1993 | Steels for cold heading and cold extruding |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.