ISO 4672:1997
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rubber and plastics hoses Sub-ambient temperature flexibility tests
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
15-02-2019
Superseded by
Language(s)
English, French
Published date
27-02-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies two methods for assessing whether a rubber or plastics hose retains adequate flexibility at sub-ambient temperatures. Replaces the second edition.
| DevelopmentNote |
Supersedes 95/121960 DC (07/2004)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 4672:1999-10 | Identical |
| NF EN ISO 4672 : 1999 | Identical |
| NBN EN ISO 4672 : 2ED 99 | Identical |
| NEN EN ISO 4672 : 1999 | Identical |
| NS EN ISO 4672 : 2ED 1999 | Identical |
| I.S. EN ISO 4672:1999 | Identical |
| I.S. EN 24672:1993 | Identical |
| PN EN ISO 4672 : 2000 | Identical |
| SN EN ISO 4672 : 1999 | Identical |
| UNI EN ISO 4672 : 2000 | Identical |
| BS EN ISO 4672:1999 | Identical |
| EN ISO 4672:1999 | Identical |
| EN 24672 : 1993 | Identical |
| UNI ISO 4672 : 1990 | Identical |
| PNE-prEN ISO 4672 | Identical |
| BS 5173-106.1(1989) : AMD 7524 | Identical |
| UNE-EN ISO 4672:2001 | Identical |
| BS ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
| BS ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining. Wire-reinforced hydraulic types for coal mining. Specification |
| 12/30212874 DC : 0 | BS EN ISO 6808 - PLASTICS HOSES AND HOSE ASSEMBLIES FOR SUCTION AND LOW-PRESSURE DISCHARGE OF PETROLEUM LIQUIDS - SPECIFICATION |
| I.S. EN 13765:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| 11/30238916 DC : 0 | BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 07/30175157 DC : DRAFT DEC 2007 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
| 07/30162629 DC : 0 | BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| UNE-EN 13765:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| 09/30194969 DC : 0 | BS ISO 11237 - RUBBER HOSES AND HOSE ASSEMBLIES - COMPACT WIRE-BRAID REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| 03/311277 DC : DRAFT JAN 2004 | ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| 05/30129301 DC : DRAFT FEB 2005 | ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS EN ISO 3949:2014 | Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
| DIN EN ISO 3821:2016-10 (Draft) | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 99/104927 DC : DRAFT JUN 1999 | PREN 13618 - WATER SUPPLY, FLEXIBLE HOSES (METALLIC AND ELASTOMERIC MATERIALS) - SPECIFICATION AND TEST METHODS |
| BS ISO 11237-1:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
| 07/30175126 DC : DRAFT DEC 2007 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| 09/30195768 DC : 0 | BS ISO 6224 - THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| EN 13766:2010 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| ISO 4639-1:1987 | Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
| I.S. EN 15889:2011 | FIRE-FIGHTING HOSES - TEST METHODS |
| CSA C22.2 No. 62282-2 : 2007 : R2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 13766:2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| EN 13765:2010+A1:2015 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification |
| I.S. EN ISO 3821:2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 1403:2008 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
| BS EN 12806:2003 | Automotive liquefied petroleum gas components. Other than containers |
| BS EN 559:2003 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS EN ISO 14557 : 2002 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| DIN EN 1361:1997-08 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| I.S. EN ISO 14557:2003 | FIRE-FIGHTING HOSES - RUBBER AND PLASTICS SUCTION HOSES AND HOSE ASSEMBLIES |
| DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| DIN EN 15889:2011-09 | Fire-fighting hoses - Test methods |
| EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| EN 12806:2003 | Automotive liquefied petroleum gas components - Other than containers |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| 07/30162632 DC : 0 | BS ISO 4642-2 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 2: SEMI-RIGID HOSES (AND HOSE ASSEMBLIES) FOR PUMPS AND VEHICLES |
| 07/30170472 DC : DRAFT AUG 2007 | BS ISO 27126 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| ISO 1436-1:2001 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| 03/311096 DC : DRAFT DEC 2003 | ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 12/30256960 DC : 0 | BS EN 13482 - RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| PD ISO/TR 17784:2003 | Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel |
| 07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| NF EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| BS ISO 2398 : 1995 AMD 9704 | RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| 07/30127452 DC : DRAFT AUG 2007 | BS ISO 13628-5 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| DIN EN ISO 1403:2010-04 | RUBBER HOSES, TEXTILE REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 1829-2 : 2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| 07/30169625 DC : 0 | BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 03/311275 DC : DRAFT DEC 2003 | ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| BS 6847:1987 | Specification for plastics hoses for suction and low-pressure discharge of petroleum liquids |
| ISO 11237-1:2004 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
| ISO 1403:2005 | Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 1823-2:1997 | Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| BS EN ISO 3861:2008 | Rubber hoses for sand and grit blasting. Specification |
| I.S. EN ISO 3861:2008 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| DIN EN 1361:2004-10 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification |
| I.S. EN 62282-2:2012 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES (IEC 62282-2:2012 (EQV)) |
| EN ISO 3861:2008 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| I.S. EN 12115:2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN ISO 2398:2010-04 | RUBBER HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION (ISO 2398:2016) |
| DIN EN ISO 3821:2010-07 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| CEI EN 62282-2 : 2013 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| DIN EN ISO 14557:2008-01 | Fire-fighting hoses - Rubber and plastics suction hoses and hose assemblies (ISO 14557:2002 + AMD 1:2007); German version EN ISO 14557:2002 + A1:2007 |
| I.S. EN ISO 5771:2008 | RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| BS 4749:1991 | Specification for textile reinforced rubber hydraulic hoses and hose assemblies |
| I.S. EN 12806:2003 | AUTOMOTIVE LIQUEFIED PETROLEUM GAS COMPONENTS - OTHER THAN CONTAINERS |
| BS 4586:1992 | Specification for spiral wire reinforced rubber covered hydraulic hoses and hose assemblies |
| BS 3832:1991 | Specification for wire reinforced rubber hoses and hose assemblies for hydraulic installations |
| UNI EN ISO 3861 : 2009 | RUBBER HOSES FOR SAND AND GRIT BLASTING - SPECIFICATION |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| 08/30187544 DC : DRAFT OCT 2008 | BS EN 13765 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| 03/311322 DC : DRAFT JAN 2004 | ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| 08/30190043 DC : DRAFT SEP 2008 | BS ISO 8789 - RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS IN MOTOR VEHICLES - SPECIFICATION |
| UNE-EN 15889:2013 | Fire-fighting hoses - Test methods |
| BS ISO 1436-2:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
| BS ISO 17165-1:2007 | Hydraulic fluid power. Hose assemblies Dimensions and requirements |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| BS ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification Diesel fuels |
| BS ISO 6224 : 1995 AMD 9706 | PLASTIC HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN ISO 3821 : 2010 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| 07/30175122 DC : DRAFT DEC 2007 | BS ISO 4079 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| 04/30110371 DC : 0 | ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
| 09/30193685 DC : 0 | BS ISO 4081 - RUBBER HOSES AND TUBING FOR COOLING SYSTEMS FOR INTERNAL-COMBUSTION ENGINES - SPECIFICATION |
| BS EN 15889:2011 | Fire-fighting hoses. Test methods |
| API 17E REDLINE : 2010 | SPECIFICATION FOR SUBSEA UMBILICALS |
| ISO/TR 17784:2003 | Rubber and plastics hoses and hose assemblies Guide for use by purchasers, assemblers, installers and operating personnel |
| ISO 1823-1:1997 | Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification |
| UNI EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN ISO 3861:2010-04 | Rubber hoses for sand and grit blasting - Specification (ISO 3861:2005) |
| DIN EN 12115:2011-04 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals - Specification; German version EN 12115:2011 |
| BS EN 1763-1:2001 | Rubber and plastics tubing, hoses and assemblies for use with commercial propane, commercial butane and their mixtures in the vapour phase Requirements for rubber and plastics tubing and hoses |
| ONORM EN 13766 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| UNI EN ISO 5771 : 2009 | RUBBER HOSES AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| UNI EN ISO 1403 : 2009 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| 05/30128222 DC : DRAFT JAN 2005 | ISO DIS 5774 - PLASTIC HOSES, TEXTILE REINFORCED, FOR COMPRESSED AIR - SPECIFICATION |
| I.S. EN 1361:2004 | RUBBER HOSES AND HOSE ASSEMBLIES FOR AVIATION FUEL HANDLING - SPECIFICATION |
| BS 6846:1987 | Specification for rubber hoses and hose assemblies for use in oil burners |
| UNI EN ISO 13628-5 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| 08/30188437 DC : 0 | BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| 12/30238564 DC : 0 | BS ISO 16301 - RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES, WIRE- OR TEXTILE-REINFORCED, FOR HYDRAULIC JACKS AND FOR HYDRAULIC POWER UNITS USED IN HYDRAULIC TOOLS - SPECIFICATION |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| 07/30150928 DC : 0 | BS ISO 5771 - RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA - SPECIFICATION |
| 07/30161494 DC : 0 | BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| BS ISO 4079-2:2005 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
| UNI ISO 17165-1 : 2012 | HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS |
| 08/30183539 DC : DRAFT JUNE 2008 | BS ISO 1825 - RUBBER HOSES AND HOSE ASSEMBLIES FOR AIRCRAFT GROUND FUELLING AND DEFUELLING - SPECIFICATION |
| 09/30200633 DC : 0 | BS ISO 4641 - RUBBER HOSES AND HOSE ASSEMBLIES FOR WATER SUCTION AND DISCHARGE - SPECIFICATION |
| BS ISO 13628-5:2002 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| UNI EN 15889 : 2011 | FIRE-FIGHTING HOSES - TEST METHODS |
| 03/300797 DC : DRAFT JAN 2003 | EN 1360 - RUBBER HOSES AND HOSE ASSEMBLIES FOR MEASURED FUEL DISPENSING - SPECIFICATION |
| BS EN ISO 3821:2010 | Gas welding equipment. Rubber hoses for welding, cutting and allied processes |
| BS ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
| I.S. EN ISO 3949:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 11237-2:2006 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| BS ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification |
| DIN EN ISO 3949:2016-08 (Draft) | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| PREN 13482 : DRAFT 2012 | RUBBER HOSES AND HOSE ASSEMBLIES FOR ASPHALT AND BITUMEN - SPECIFICATION |
| ISO 3862-2:2005 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| DIN EN 13765:2015-05 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| EN ISO 3949:2014 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009) |
| BS EN 13765 : 2010 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF HYDROCARBONS, SOLVENTS AND CHEMICALS - SPECIFICATION |
| DIN EN ISO 5771:2009-10 | Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling. Specification |
| ISO 3862-1:2001 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| UNE-EN ISO 3821:2011 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| BS EN 12115:2011 | Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| 11/30242646 DC : DRAFT FEB 2011 | BS EN 62282-2 - FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| BS EN ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia. Specification |
| UNE-EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 14557:2002 | Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies |
| ISO 3861:2005 | Rubber hoses for sand and grit blasting Specification |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Part 2: Residential applications |
| ISO 13628-5:2009 | Petroleum and natural gas industries Design and operation of subsea production systems Part 5: Subsea umbilicals |
| ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification |
| BS EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications. Specification |
| 09/30150663 DC : 0 | BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS |
| BS EN 62282-2:2012 | Fuel cell technologies Fuel cell modules |
| BS ISO 22734-2:2011 | Hydrogen generators using water electrolysis process Residential applications |
| UNE-EN 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| EN ISO 3821:2010 | Gas welding equipment - Rubber hoses for welding, cutting and allied processes (ISO 3821:2008) |
| EN 1327:1996 | Gas welding equipment - Thermoplastic hoses for welding and allied processes |
| EN 559 : 2003 | GAS WELDING EQUIPMENT - RUBBER HOSES FOR WELDING, CUTTING AND ALLIED PROCESSES |
| EN ISO 1403:2008 | Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 1403:2005) |
| EN 1361:2004 | Rubber hoses and hose assemblies for aviation fuel handling - Specification |
| EN ISO 13628-5:2009 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 5: Subsea umbilicals (ISO 13628-5:2009) |
| EN ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) |
| EN 15889:2011 | Fire-fighting hoses - Test methods |
| EN 1763-1 : 2000 | RUBBER AND PLASTICS TUBING, HOSES AND ASSEMBLIES FOR USE WITH COMMERCIAL PROPANE, COMMERCIAL BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE - PART 1: REQUIREMENTS FOR RUBBER AND PLASTICS TUBING AND HOSES |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| BS ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems. Specification |
| 12/30261644 DC : 0 | BS EN 16436 - RUBBER AND PLASTIC HOSES AND TUBINGS FOR USE WITH PROPANE, BUTANE AND THEIR MIXTURES IN THE VAPOUR PHASE |
| 08/30183047 DC : DRAFT MAY 2008 | BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ONORM EN 12115 : OCT 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
| BS ISO 3862:2009 | Rubber hoses and hose assemblies. Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids. Specification |
| BS EN 1829-2:2008 | High-pressure water jet machines. Safety requirements Hoses, hose lines and connectors |
| BS EN ISO 13628-5:2009 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea umbilicals |
| ISO 4079-2:2005 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| BS ISO 11237-2:2006 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
| BS ISO 1403 : 1995 AMD 9703 | RUBBER HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATIONS |
| DIN EN 13766:2010-11 | THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION |
| I.S. EN ISO 13628-5:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 5: SUBSEA UMBILICALS |
| CSA C22.2 No. 62282-2 :2007 | FUEL CELL TECHNOLOGIES - PART 2: FUEL CELL MODULES |
| I.S. EN 1829-2:2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| ISO 19013-1:2005 | Rubber hoses and tubing for fuel circuits for internal combustion engines Specification Part 1: Diesel fuels |
| UNE-EN 13766:2011 | Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification |
| ISO 1436-2:2005 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| BS ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Industrial and commercial applications |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| BS EN 1761:1999 | Rubber hoses and hose assemblies for fuel truck delivery. Specification |
| UNE-ISO 22734-1:2012 | Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications |
| UNI EN 12115 : 2011 | RUBBER AND THERMOPLASTICS HOSES AND HOSE ASSEMBLIES FOR LIQUID OR GASEOUS CHEMICALS - SPECIFICATION |
| DIN EN 1829-2:2012-02 | High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and connectors (includes Corrigendum AC:2011) |
| EN ISO 1402:2009 | Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) |
| ISO 3383:1985 | Rubber — General directions for achieving elevated or subnormal temperatures for test purposes |
| ISO 471:1995 | Rubber Temperatures, humidities and times for conditioning and testing |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.