• ISO 4793:1980

    Current The latest, up-to-date edition.

    Laboratory sintered (fritted) filters — Porosity grading, classification and designation

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  01-10-1980

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Filters are graded according to their pore size index in one of the eight classes specified. This is applicable to laboratory filters made of glass, vitreous silica, ceramics, metals and plastic materials. Annex A specifies a method for determination of pore size index. Annex B and C concern with a procedure for assessing uniformity of filters and for determination of air permeability.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 48
    Development Note Also numbered as BS 1752(1983). (06/2005)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN ISO 11262 E : 2012 SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE (ISO 11262:2011)
    ISO 1628-4:1999 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
    09/30201918 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
    BS EN ISO 10769:2011 Clay geosynthetic barriers. Determination of water absorption of bentonite
    DIN ISO 6414:1984-02 TECHNICAL DRAWINGS FOR GLASSWARE
    BS 5766-23:2001 Methods for analysis of animal feeding stuffs Determination of crude fibre content. Method with intermediate filtration
    BS 2774(1983) : 1983 AMD 8620 SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS
    I.S. EN 14035-35:2004 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
    BS EN 60422:2013 Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
    13/30280257 DC : 0 BS ISO 6101-3 - RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION SPECTROMETRY - PART 3: DETERMINATION OF COPPER CONTENT
    BS ISO 150 : 2006 AMD 17093 RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    BS 7825-3.1:1997 Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties
    BS ISO 11667 : 1997 AMD 10676 FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
    BS ISO 11262:2011 Soil quality. Determination of total cyanide
    08/30184575 DC : DRAFT JUNE 2008 BS EN ISO 787-7 - GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
    DIN EN ISO 787-7:2010-02 General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
    I.S. EN ISO 4619:2010 DRIERS FOR PAINTS AND VARNISHES
    BS 2782-1.130D(1993) : 1993 AMD 13567 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE POTENTIOMETRIC METHOD
    17/30349869 DC : 0 BS ISO 20596-1 - WATER QUALITY - DETERMINATION OF CYCLIC VOLATILE METHYLSILOXANES IN WATER - PART 1: METHOD USING PURGE AND TRAP WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS)
    BS ISO 6741-3:1987 Textiles. Fibres and yarns. Determination of commercial mass of consignments Specimen cleaning procedures
    03/100561 DC : DRAFT JULY 2003 IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
    97/700600 DC : DRAFT JAN 1997 PREN 3839 - AEROSPACE SERIES - ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL
    02/122382 DC : DRAFT JUN 2002 PREN 14456 - PRODUCTS USED FOR TREATMENT WATER INTENDED FOR HUMAN CONSUMPTION - BONE CHARCOAL
    DIN EN 1650:2013-08 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    BS 7164-25:1990 Chemical tests for raw and vulcanized rubber Method for determination of sulphide sulphur content
    PREN 4503 : 200P1 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
    ISO 699:2015 Pulps Determination of alkali resistance
    ISO 16000-14:2009 Indoor air Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
    I.S. EN 16339:2013 AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING
    I.S. EN 24938:1991 STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:1988)
    I.S. EN ISO 150:2007 RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    NF ISO 16000-14 : 2009 INDOOR AIR - PART 14: DETERMINATION OF TOTAL (GAS AND PARTICLEPHASE) POLYCHLORINATED DIOXIN-LIKE BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) - EXTRACTION, CLEAN-UP AND ANALYSIS BY HIGH-RESOLUTION GAS CHROMATOGRAPHY AND MASS SPECTROMETRY
    I.S. EN 16438:2014 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    NF EN 24938 : 1990 STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD
    UNE-ISO 1628-4:2013 Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
    ADA 6 : 1985(R2005) DENTAL MERCURY
    I.S. EN ISO 10769:2011 CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
    EN ISO 150:2007 Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006)
    ISO 6414:1982 Technical drawings for glassware
    UNI EN 12353 : 2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - PRESERVATION OF TEST ORGANISMS USED FOR THE DETERMINATION OF BACTERICIDAL (INCLUDING LEGIONELLA), MYCOBACTERICIDAL, SPORICIDAL, FUNGICIDAL AND VIRUCIDAL (INCLUDING BACTERIOPHAGES) ACTIVITY
    BS EN 12353:2013 Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
    BS EN ISO 182-2:2000 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures pH method
    BS EN ISO 12224-1:1998 Solder wire, solid and flux cored. Specification and test methods Classification and performance requirements
    UNE-EN ISO 14184-1:2011 Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
    BS EN 14035-35:2004 Fireworks Throwdowns. Specification and test methods
    ISO 3262-2:1998 Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate)
    BS EN ISO 3262-2:1998 Extenders for paints. Specifications and methods of test Barytes (natural barium sulfate)
    BS EN 1164:1999 Feather and down. Test methods. Determination of the turbidity of an aqueous extract
    BS EN ISO 1172:1999 Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods
    DIN EN 14035-35:2005-02 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
    I.S. EN 12606-2:2000 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION
    EN 12592:2014 Bitumen and bituminous binders - Determination of solubility
    DIN ISO 11235:2006-07 RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS
    EN 13624:2013 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
    DIN ISO 4619:2002-04 DRIERS FOR PAINTS AND VARNISHES
    BS 4227:1986 Specification for dental mercury
    EN 1163:1996 Feather and down - Test methods - Determination of the oil and fat content
    EN 1948-4:2010+A1:2013 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    EN 61125:1993/A1:2004 UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
    EN 12386:2012 Chemicals used for treatment of water intended for human consumption - Copper sulfate
    EN 12174:2013 Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
    EN 12485:2017 Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods
    EN 1165:1996 Feather and down - Test methods - Determination of water-soluble chlorides
    I.S. EN ISO 3262-3:1999 EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BLANC FIXE
    DEFSTAN 68-113/2(2012) : 2012 SILICON, POWDERED
    DEFSTAN 68-83/2(2012) : 2012 SULFUR
    DEFSTAN 13-81/3(2013) : 2013 CALCIUM SILICIDE, SIZES 100, 200, 240
    I.S. EN ISO 3262-2:1999 EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BARYTE (NATURAL BARIUM SULFATE)
    DEFSTAN 13-128/2(2013) : 2013 BORON, AMORPHOUS, GRADES 1 AND 2
    DEFSTAN 68-43/3(2013) : 2013 ZINC OXIDE
    DEFSTAN 13-123/2(2012) : 2012 ACAROID RESIN
    DEFSTAN 13-70/3(2013) : 2013 SODIUM NITRATE, GRADE 1
    DEFSTAN 68-211/2(2009) : 2009 PHOSPHORUS AMORPHOUS
    I.S. EN ISO 1172:1999 TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
    DEFSTAN 68-265/2(2009) : 2009 AMMONIUM PERCHLORATE, LF QUALITY
    DEFSTAN 13-52/3(2012) : 2012 BISMUTH (3) OXIDE
    DEFSTAN 68-77/2(2013) : 2013 CALCIUM OXALATE MONOHYDRATE
    DEFSTAN 13-168/2(2013) : 2013 COMPOSITION SR 214
    DEFSTAN 13-166/2(2013) : 2013 GUNPOWDER, SULFURLESS - TYPES: SFG 12, SFG 20, SFG 40, SFG 90 AND SMP
    DEFSTAN 68-44/3(2013) : 2013 GUM ACACIA
    DEFSTAN 68-80/2(2013) : 2013 POTASSIUM PERCHLORATE
    DEFSTAN 13-85/3(2013) : 2013 LACTOSE (MONOHYDRATE) - SIZE 72, SIZE 120, SIZE 170
    PREN 13697 : DRAFT 2012 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    DIN ISO 4619 E : 2002 DRIERS FOR PAINTS AND VARNISHES
    13/30280260 DC : 0 BS ISO 6101-4 - RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION SPECTROMETRY - PART 4: DETERMINATION OF MANGANESE CONTENT
    BS ISO 18068:2014 Cotton fibres. Test method for sugar content. Spectrophotometry
    I.S. EN 14035-24:2004 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
    I.S. EN 60422:2013 MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
    UNI EN ISO 4619 : 2011 DRIERS FOR PAINTS AND VARNISHES
    17/30366149 DC : 0 BS ISO 28198 - VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER
    04/30124059 DC : DRAFT OCT 2004 ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    PREN 12592 : DRAFT 2013 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    BS 2782-1.130C(1993) : 1993 AMD 13566 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE CONDUCTOMETRIC METHOD
    13/30264749 DC : 0 BS ISO 18068 - COTTON FIBERS - TEST METHOD FOR SUGAR CONTENT - SPECTROPHOTOMETRY
    03/105714 DC : DRAFT MAR 2003 ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
    00/120794 DC : DRAFT FEB 2000 BS 3483-X - METHODS FOR TESTING PIGMENTS FOR PAINTS - DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
    ISO 10238:1999 Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of sulfur content by an instrumental method
    BS ISO 6101-3:2014 Rubber. Determination of metal content by atomic absorption spectrometry Determination of copper content
    I.S. EN 1948-4:2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    DIN ISO 11235 E : 2006 RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS
    BS ISO 6235:2016 Rubber, raw. Determination of block polystyrene content. Ozonolysis method
    05/30138264 DC : DRAFT AUG 2005 EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    BS 2000-53(1999) : 1999 CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
    BS EN 61125:1993 Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
    UNI EN 4503 : 2014 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
    PD CEN/TS 17060:2017 Fertilizers. Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
    10/30199670 DC : 0 BS ISO 11262 - SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE
    PREN 12174 : DRAFT 2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
    BS ISO 7780:1998 Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
    BS EN ISO 4938:2016 Steel and iron. Determination of nickel content. Gravimetric or titrimetric method
    BS ISO 14849:1999 Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
    BS 7164-28.1(1990) : 1990 CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF COPPER CONTENT - ATOMIC ABSORPTION SPECTROPHOTOMETRY
    PREN 12386 : DRAFT 2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
    DIN EN 13697:2015-06 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    DIN EN ISO 150:2007-05 RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    NFT 75 611 : 2007 COSMETICS - MICROBIOLOGY - EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT
    I.S. EN IEC 61125:2018 INSULATING LIQUIDS - TEST METHODS FOR OXIDATION STABILITY - TEST METHOD FOR EVALUATING THE OXIDATION STABILITY OF INSULATING LIQUIDS IN THE DELIVERED STATE
    PREN 1657 : DRAFT 2014 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    BS EN ISO 150:2007 Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test
    UNI EN 16438 : 2014 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NONPOROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    BS EN 15947-4 : 2016 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
    VDE 0370-12 : 1994 SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
    UNE-EN ISO 787-7:2010 General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
    EN 12353:2013 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
    NF EN ISO 4619 : 2011 DRIERS FOR PAINTS AND VARNISHES
    BS EN 13697:2001 Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2/step 2)
    DIN EN ISO 14184-1:2011-12 Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
    DIN EN 12353:2013-04 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
    UNE-EN 12485:2010 Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate - Test methods
    BS EN ISO 6865 : 2001 METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION
    BS EN 12485:2017 Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime. Test methods
    ISO 3735:1999 Crude petroleum and fuel oils Determination of sediment Extraction method
    ISO 6865:2000 Animal feeding stuffs — Determination of crude fibre content — Method with intermediate filtration
    UNE-EN 12353:2013 Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
    BS EN ISO 182-4:2001 Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Potentiometric method
    ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
    UNE-EN 1657:2016 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
    BS EN 12386:2012 Chemicals used for treatment of water intended for human consumption. Copper sulfate
    DIN EN 14035-24:2004-11 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
    DIN EN 1948-2:2006-06 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs
    DIN EN 1275:2006-03 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1); German version EN 1275:2005
    DIN EN 12485:2017-10 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
    I.S. EN 12485:2017 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
    I.S. EN 12386:2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
    I.S. EN 1657:2016 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    I.S. EN 1948-2:2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
    I.S. EN 12353:2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - PRESERVATION OF TEST ORGANISMS USED FOR THE DETERMINATION OF BACTERICIDAL (INCLUDING LEGIONELLA), MYCOBACTERICIDAL, SPORICIDAL, FUNGICIDAL AND VIRUCIDAL (INCLUDING BACTERIOPHAGES) ACTIVITY
    I.S. EN 12592:2014 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    I.S. EN 12174:2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
    I.S. EN ISO 14184-1:2011 TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD)
    I.S. EN 13624:2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    DIN EN 1911-2:1998-07 STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF HCL - PART 2: GASEOUS COMPOUNDS ABSORPTION
    BS 7164-26.1:1997 Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content Atomic absorption spectrometry
    VDI 3498 Blatt 1:2002-07 Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters
    BS 7164-28.1:1997 Chemical tests for raw and vulcanized rubber. Methods for determination of copper content Atomic absorption spectrometry
    BS 2782-7:Method 732D:1999 Methods of testing plastics. Rheological properties Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers - Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers
    ONORM EN 12174 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
    BS 6043-1.13:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode pitch - Determination of sulfur content
    UNE-EN ISO 4938:2016 Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016)
    BS ISO 4619 : 1998 DRIERS FOR PAINTS AND VARNISHES
    BS EN ISO 4619:2010 Driers for paints and varnishes
    BS 3900-B17:1991 Methods of test for paints Preparation of acid extracts from dried paint films
    I.S. EN ISO 4938:2016 STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:2016)
    BIS IS 1448-123 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 123: PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
    09/30198710 DC : 0 BS EN 1948-4 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    12/30258191 DC : 0 BS EN 12386 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
    BS 3483-B3:1982 Methods for testing pigments for paints Determination of residue on sieve (water method, using a manual procedure)
    DIN EN 16339:2013-11 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
    18/30369599 DC : 0 BS EN ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    ISO 6978:1992 Natural gas Determination of mercury
    DIN 19266:2015-05 PH MEASUREMENT - REFERENCE BUFFER SOLUTIONS FOR THE CALIBRATION OF PH MEASURING EQUIPMENT
    13/30255303 DC : 0 BS EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    DIN EN 1948-4:2014-03 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    BS 7678:1993 Method for determination of mercury in natural gas
    BS EN IEC 61125:2018 Insulating liquids. Test methods for oxidation stability. Test method for evaluating the oxidation stability of insulating liquids in the delivered state
    04/30115588 DC : DRAFT JUN 2004 ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
    BS EN 4503:2013 Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts
    BS 6806:2002 Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid
    BS ISO 6101-4:2014 Rubber. Determination of metal content by atomic absorption spectrometry Determination of manganese content
    BIS IS 1448-30 : 2013 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
    UNI EN ISO 787-7 : 2009 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
    10/30215366 DC : 0 BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
    BS 7164-26.2(1990) : 1990 CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF MANGANESE CONTENT - SODIUM PERIODATE PHOTOMETRIC METHODS
    PREN 3839 : DRAFT 1996 AEROSPACE SERIES ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL
    DIN EN ISO 10769:2011-09 Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
    BIS IS/ISO 6741-3 : 1987 TEXTILES - FIBRES AND YARNS - DETERMINATION OF COMMERCIAL MASS OF CONSIGNMENTS
    ISO 7624:1997 Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability
    DIN EN 15947-4:2016-02 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
    I.S. EN 1650:2008 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    IP 459-2 : 2000 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION
    DIN EN 60465 : 1994 SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
    ISO 4619:1998 Driers for paints and varnishes
    UNE-EN 16339:2014 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
    ISO 11235:2016 Rubber compounding ingredients — Sulfenamide accelerators — Test methods
    ISO 7780:1998 Rubbers and rubber latices Determination of manganese content Sodium periodate photometric methods
    ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems Specification
    ISO 14849:1999 Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Indophenol method
    ISO 5796:2000 Rubber compounding ingredients Natural calcium carbonate Test methods
    IEC 61125:2018 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
    DIN EN 12386:2013-01 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
    DIN EN 12592:2015-01 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    DIN EN 12174:2013-08 Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
    DIN EN 14456 E : 2004 PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BONE CHARCOAL
    DIN EN 14562:2006-08 Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
    ISO 14184-1:2011 Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method)
    BS EN ISO 182-3 : 2001 PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 3: CONDUCTOMETRIC METHOD
    BS EN 1948-3:2006 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Identification and quantification of PCDDs/PCDFs
    BS EN 1657:2016 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)
    BS EN 14562:2006 Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
    ISO 14182:1999 Animal feeding stuffs — Determination of residues of organophosphorus pesticides — Gas chromatographic method
    BS EN 1650 : 2008 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    I.S. EN 1275:2006 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BASIC FUNGICIDAL OR BASIC YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS - TEST METHOD AND REQUIREMENTS (PHASE 1)
    EN ISO 4619:2010 Driers for paints and varnishes (ISO 4619:1998)
    EN 1650:2008+A1:2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    EN 1948-2:2006 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs
    EN 1657:2016 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
    UNI EN 12386 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
    UNI EN ISO 14184-1 : 2011 TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD)
    UNI EN 12174 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
    UNI EN ISO 10769 : 2011 CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
    UNI EN 1948-2 : 2006 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
    UNI EN 12592 : 2015 BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
    DEFSTAN 13-67/3(2013) : 2013 POTASSIUM DICHROMATE
    EN IEC 61125:2018 Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
    BS EN 16339:2013 Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
    15/30324378 DC : 0 BS EN 12485 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE AND CALCIUM MAGNESIUM CARBONATE - TEST METHODS
    ISO 8332:2011 Rubber compounding ingredients Sulfur Methods of test
    12/30262905 DC : 0 BS EN 13697 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    13/30276415 DC : 0 BS EN ISO 4938 - STEEL AND IRONS - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD
    DIN EN 16438:2014-07 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    08/30189644 DC : DRAFT SEP 2008 BS ISO 28198 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER
    BS ISO 16000-14:2009 Indoor air Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
    BS 2000-280(1999) : 1999 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
    BS 2461:1983 Specification for gas washing bottles
    UNE-EN 15947-4:2016 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
    99/711597 DC : DRAFT JULY 1999 PREN 4503 - AEROSPACE SERIES - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
    02/207269 DC : 0 IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
    BS ISO 699:2015 Pulps. Determination of alkali resistance
    BS 4784-3:1988 Methods for determination of commercial mass of consignments of textiles Specimen cleaning procedures
    10/30212476 DC : 0 BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
    03/320961 DC : DRAFT NOV 2003 EN 1948-2 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
    14/30282212 DC : 0 BS EN 1657 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    DEFSTAN 68-118/1(1993) : INTERIM DEICING & ANTI ICING FLUID FOR RUNWAYS
    BS ISO 5796:2000 Rubber compounding ingredients. Natural calcium carbonate. Test methods
    ISO 10237:1997 Carbonaceous materials for use in the production of aluminium Calcined coke Determination of residual-hydrogen content
    DIN 18132:2012-04 SOIL, TESTING PROCEDURES AND TESTING EQUIPMENT - DETERMINATION OF WATER ABSORPTION
    DIN EN 16438 E : 2014 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    I.S. EN 4503:2013 AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
    UNI ISO 1657 : 2014 RUBBER, RAW AND RUBBER LATEX - DETERMINATION OF IRON CONTENT - 1,10-PHENANTHROLINE PHOTOMETRIC METHOD
    I.S. EN 13697:2015 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
    ISO 18068:2014 Cotton fibres Test method for sugar content Spectrophotometry
    ISO 6101-4:2014 Rubber Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content
    ISO 25947-4:2017 Fireworks — Categories 1, 2 and 3 — Part 4: Test methods
    BS ISO 28198:2009 Vegetable fats and oils. Determination of toluene insoluble matter
    DIN EN ISO 150 E : 2007 RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
    BS 2000-306(2011) : 2011 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 306: DETERMINATION OF OXIDATION STABILITY OF STRAIGHT MINERAL OIL
    I.S. EN 15947-4:2015 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
    ISO 6741-3:1987 Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 3: Specimen cleaning procedures
    ISO 28198:2009 Vegetable fats and oils Determination of toluene insoluble matter
    ISO 11262:2011 Soil quality — Determination of total cyanide
    EN 13697:2015 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
    I.S. EN 61125:1993 UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
    ISO 6101-3:2014 Rubber Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content
    EN ISO 6414:1994 Technical drawings for glassware (ISO 6414:1982)
    I.S. EN ISO 6414:1995 TECHNICAL DRAWINGS FOR GLASSWARE
    DIN EN 12485:2015-08 (Draft) CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
    DIN EN 14562 E : 2006 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE CARRIER TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY FOR INSTRUMENTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    ISO 787-7:2009 General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
    BS EN ISO 3262-3:1998 Extenders for paints. Specifications and methods of test Blanc fixe
    BS EN ISO 14182:2000 Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method
    BS EN ISO 14184-1:2011 Textiles. Determination of formaldehyde Free and hydrolised formaldehyde (water extraction method)
    BS EN 13624:2013 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1)
    ISO 10769:2011 Clay geosynthetic barriers Determination of water absorption of bentonite
    ISO 182-4:1993 Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 4: Potentiometric method
    BS EN 12606-2:2000 Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content Method by extraction
    ISO 11667:1997 Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
    BS EN 1911-2:1998 Stationary source emissions. Manual method of determination of HCI Gaseous compounds absorption
    ISO 182-3:1993 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method
    BS EN 12174:2013 Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate
    BS EN 12592:2014 Bitumen and bituminous binders. Determination of solubility
    BS EN 1948-2:2006 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Extraction and clean-up of PCDDs/PCDFs
    ISO 3262-3:1998 Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe
    BS EN 14035-24:2004 Fireworks Novelty matches. Specification and test methods
    ISO 4938:2016 Steel and iron Determination of nickel content Gravimetric or titrimetric method
    UNE-EN 12174:2013 Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
    BS EN ISO 3735:1999 Crude petroleum and fuel oils. Determination of sediment. Extraction method
    BS EN 1275:2005 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1)
    UNE-EN 12592:2015 Bitumen and bituminous binders - Determination of solubility
    UNE-EN 13624:2014 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
    UNE-EN 1650:2008 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
    BS EN 14456:2004 Products used for treatment of water intended for human consumption. Bone charcoal
    UNE-EN 13697:2015 Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
    UNE-EN ISO 4619:2011 Driers for paints and varnishes (ISO 4619:1998)
    UNE-EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    IEC 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    BS EN ISO 11667:2000 Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
    EN ISO 3262-2:1998 Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998)
    EN ISO 3735:1999 Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
    EN 14562 : 2006 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE CARRIER TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY FOR INSTRUMENTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
    EN ISO 787-7 : 2009 ISO 787-7:2009 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water.
    EN 14035-35 : 2004 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
    EN 14456:2004 Products used for treatment of water intended for human consumption - Bone charcoal
    EN ISO 12224-1:1998 Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997)
    EN 14035-24 : 2004 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
    EN 16438:2014 Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
    EN ISO 182-3:2000 Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
    EN ISO 14182 : 1999 ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD
    EN 15947-4:2015 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
    EN ISO 1172:1998 Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
    EN ISO 4938:2016 Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016)
    EN ISO 182-2 : 1999 PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 2 - PH METHOD
    EN ISO 11667 : 1999 FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
    EN ISO 6865 : 2000 ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION
    EN 24938:1990/AC:1991 STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:1988)
    EN ISO 3262-3:1998 Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998)
    EN 16339:2013 Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
    EN 4503:2013 Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water soluble chloride and sulfate of aqueous extracts
    EN ISO 10769:2011 Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
    EN ISO 14184-1:2011 Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
    EN ISO 182-4 : 2000 PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD
    BS ISO 11425:1996 Rubber hoses and hose assemblies for automobile power-steering systems. Specification
    BS EN 16438:2014 Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
    14/30303444 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
    DEFSTAN 68-74/2(2013) : 2013 BARIUM NITRATE, GRADES 1 AND 1A
    ISO 1657:1986 Rubber, raw and rubber latex Determination of iron content 1,10-Phenanthroline photometric method
    DD CEN/TS 1948-4:2007 Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Sampling and analysis of dioxin-like PCBs
    12/30268242 DC : 0 BS EN 12174 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
    BS ISO 11235:2016 Rubber compounding ingredients. Sulfenamide accelerators. Test methods
    BS EN 1948-4 : 2010 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    UNE-ISO 1628-6:2013 Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
    BS ISO 1172 : 96 AMD 10350 TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
    09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
    BS EN ISO 787-7:2009 General methods of test for pigments and extenders Determination of residue on sieve. Water method. Manual procedure
    09/30175168 DC : 0 BS EN ISO 10769 - CLAY GEOSYNTHETIC BARRIERS (GBR-C) - DETERMINATION OF WATER ABSORPTION OF BENTONITE
    DIN ISO 11262:2012-04 Soil quality - Determination of total cyanide (ISO 11262:2011)
    05/30092751 DC : DRAFT APR 2005 EN 1657 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY FIELD - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    NF EN ISO 10769 : 2011 CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
    UNI EN 16339 : 2013 AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING
    BS 2000-280(1996) : 1996 METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
    17/30355140 DC : 0 BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
    BS 7164-26.1(1990) : 1990 CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF MANGANESE CONTENT - ATOMIC ABSORPTION SPECTROMETRY
    CGSB 4.2-72.3 : M1991(R2013) TEXTILE TEST METHODS - TEXTILES - FIBRES AND YARNS - DETERMINATION OF COMMERCIAL MASS OF CONSIGNMENTS - PART 3: SPECIMEN CLEANING PROCEDURES
    02/564187 DC : DRAFT OCT 2002 BS EN 14562 - CHEMICAL DISINFECTANTS - QUANTITATIVE CARRIER TEST FOR EVALUATION OF FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS FOR INSTRUMENTS USED IN MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2)
    BS 5766-20(2000) : 2000 ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD
    S.R. CEN TS 1948-4:2007 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    BS 2782-7 Method 732D:1991 Methods of testing plastics. Rheological properties Determination of viscosity number of polycarbonate moulding and extrusion materials
    BS ISO 11338-1:2003 Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons Sampling
    DIN ISO 16000-14:2012-03 Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009)
    UNI EN 1650 : 2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    BS ISO 8332:2011 Rubber compounding ingredients. Sulfur. Methods of test
    UNI EN 1948-4 : 2014 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
    NF ISO 8332 : 2012 RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
    S.R. CEN/TS 17060:2017 FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS > 10% USING A GRAVIMETRIC METHOD WITH 8-HYDROXYQUINOLINE
    DIN EN ISO 4619:2011-02 DRIERS FOR PAINTS AND VARNISHES
    ISO 6235:2016 Rubber, raw Determination of block polystyrene content Ozonolysis method
    PREN 12485 : DRAFT 2015 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
    NF EN ISO 787-7 : 2009 GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
    ISO 11338-1:2003 Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling
    ISO 150:2006 Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test
    ISO 6745:1990 Zinc phosphate pigments for paints — Specifications and methods of test
    DIN EN ISO 1172:1998-12 Textile glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
    DIN EN 13624:2013-12 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase2, step 1)
    ISO 182-2:1990 Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method
    UNE-EN 12386:2013 Chemicals used for treatment of water intended for human consumption - Copper sulfate
    EN 1162:1996 Feather and down - Test methods - Determination of the oxygen index number
    DIN EN 14456:2004-09 Products used for treatment of water intended for human consumption - Bone charcoal
    CEN/TS 17060 : 2017 FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS > 10% USING A GRAVIMETRIC METHOD WITH 8-HYDROXYQUINOLINE
    EN 12606-2:1999 Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction
    CEN/TS 1948-4:2007 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
    EN 1164:1998 Feather and down - Test methods - Determination of the turbidity of an aqueous extract
    EN 1275:2005 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)
    UNI EN 13624 : 2013 CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
    EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    BS 2782-1.130B(1991) : 1991 AMD 10685 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE pH METHOD
    BS 4382(1980) : 1980 AMD 8898 METHOD FOR DETERMINATION OF SEDIMENT IN CRUDE PETROLEUM AND FUEL OILS (EXTRACTION METHOD)
    NF EN ISO 182-3 : 2000 PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 3: CONDUCTOMETRIC METHOD
    ONORM EN 13697 : 2015