ISO 5479:1997
Current
Current
The latest, up-to-date edition.
Statistical interpretation of data — Tests for departure from the normal distribution
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
22-05-1997
Important note : Users cannot be edited or removed once added to your Multi user PDF.| DevelopmentNote |
Also numbered as BS 2846-7(1997) (06/2005)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NBN E 27 073 : 1988 | Identical |
| SAC GB/T 4882 : 2001 | Identical |
| GOST R ISO 5479 : 2002 | Identical |
| DIN ISO 5479:2004-01 | Identical |
| PN ISO 5479 : 2002 | Identical |
| BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
| CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| 16/30325183 DC : 0 | BS EN 689 - WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| BS ISO 7870-2:2013 | Control charts Shewhart control charts |
| BS ISO 11843-3:2003 | Capability of detection Methodology for determination of the critical value for the response variable when no calibration data are used |
| BS EN ISO 80369-20:2015 | Small-bore connectors for liquids and gases in healthcare applications Common test methods |
| 12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| BS ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| BS ISO 16269-6:2014 | Statistical interpretation of data Determination of statistical tolerance intervals |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO 16269-4:2010 | Statistical interpretation of data Part 4: Detection and treatment of outliers |
| I.S. EN 689:1995 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| ANSI/AAMI/ISO 80369-20:2015 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS |
| ISO 28594:2017 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| NF ISO 11843-4 : 2004 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
| ISO 22514-3:2008 | Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
| ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| 02/400884 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| UNI ISO 22514-2 : 2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 2: PROCESS CAPABILITY AND PERFORMANCE OF TIME-DEPENDENT PROCESS MODELS |
| 12/30242633 DC : 0 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| BS ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| DIN ISO 3951:1992-08 | SAMPLING PROCEDURES AND CHARTS FOR INSPECTION BY VARIABLES FOR PERCENT NONCONFORMING |
| ANSI S12-3 : 1985 : R1996 | STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
| BS ISO 11843-6:2013 | Capability of detection Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 22514-4:2016 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| ISO 11843-4:2003 | Capability of detection Part 4: Methodology for comparing the minimum detectable value with a given value |
| ISO/TR 22514-4:2007 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| PREN 689 : DRAFT 2016 | WORKPLACE EXPOSURE - MEASUREMENT OF EXPOSURE BY INHALATION TO CHEMICAL AGENTS - STRATEGY FOR TESTING COMPLIANCE WITH OCCUPATIONAL EXPOSURE LIMIT VALUES |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| BS 6002-1:2007 | Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| KTA 3101.1 : 2016(R2017) | AUSLEGUNG DER REAKTORKERNE VON DRUCK- UND SIEDEWASS ERREAKTOREN - TEIL 1: GRUNDSAETZE DER THERMOHYDRAULISCHEN AUSLEGUNG |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| NF EN 62058-11 : 2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| 07/30148930 DC : 0 | BS ISO 11843-5 - CAPABILITY OF DETECTION - PART 5: METHODOLOGY IN THE LINEAR AND NON-LINEAR CALIBRATION CASES |
| 11/30244661 DC : 0 | BS EN 60493-1 - GUIDE FOR THE STATISTICAL ANALYSIS OF AGEING TEST DATA - PART 1: METHODS BASED ON MEAN VALUES OF NORMALLY DISTRIBUTED TEST RESULTS |
| BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
| 02/400873 DC : DRAFT OCT 2002 | BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| BS ISO 22514-2:2017 | Statistical methods in process management. Capability and performance Process capability and performance of time-dependent process models |
| 05/30132248 DC : DRAFT APR 2005 | EN 14547 - SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
| 02/400883 DC : DRAFT OCT 2002 | CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
| PD ISO/TR 22514-4:2007 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| UNI ISO 11462-2 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
| UNI ISO 11843-6 : 2014 | CAPABILITY OF DETECTION - PART 6: METHODOLOGY FOR THE DETERMINATION OF THE CRITICAL VALUE AND THE MINIMUM DETECTABLE VALUE IN POISSON DISTRIBUTED MEASUREMENTS BY NORMAL APPROXIMATIONS |
| UNE-ISO 16269-6:2015 | Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
| BS ISO 11843-4:2003 | Capability of detection Methodology for comparing the minimum detectable value with a given value |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| CEN/TR 14547:2005 | Sampling schemes for third party conformity assessment of fineness in precious metal articles |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| UNI ISO/TR 8550-3 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| ISO/TR 8550-1:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| 14/30314227 DC : 0 | BS ISO 22514-4 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| 08/19974897 DC : DRAFT JULY 2008 | BS ISO 16269-4 - STATISTICAL INTERPRETATION OF DATA - PART 4: DETECTION AND TREATMENT OF OUTLIERS |
| 13/30282550 DC : 0 | BS EN ISO 80369-20 - SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS |
| UNE-ISO 16269-4:2015 | Statistical interpretation of data -- Part 4: Detection and treatment of outliers |
| 04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
| DIN 55303-2:1984-05 | STATISTICAL INTERPRETATION OF DATA; TESTS AND CONFIDENCE INTERVALS RELATING TO EXPECTATIONS AND VARIANCES |
| BS 6002-4.1:1994 | Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
| UNI ISO 11843-4 : 2014 | CAPABILITY OF DETECTION - PART 4: METHODOLOGY FOR COMPARING THE MINIMUM DETECTABLE VALUE WITH A GIVEN VALUE |
| UNI ISO 22514-3 : 2010 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 3: MACHINE PERFORMANCE STUDIES FOR MEASURED DATA ON DISCRETE PARTS |
| NF ISO 11843-3 : 2003 | CAPABILITY OF DETECTION - PART 3: METHODOLOGY FOR DETERMINATION OF THE CRITICAL VALUE FOR THE RESPONSE VARIABLE WHEN NO CALIBRATION DATA ARE USED |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| UNE-ISO 3951-1:2012 | Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| BS 6002-4:2006 | Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| ANSI S12-3 : 1985 : R2011 | STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| 17/30325386 DC : 0 | BS ISO 18250-1- CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS - PART 1: GENERAL REQUIREMENTS AND COMMON TEST METHODS |
| UNE-ISO 7870-2:2017 | Control charts -- Part 2: Shewhart control charts |
| GOST R ISO 16269-6 : 2005 | STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| UNI ISO 7870-2 : 2014 | CONTROL CHARTS - PART 2: SHEWHART CONTROL CHARTS |
| ISO 39511:2018 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| I.S. ENV 1006:2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| ISO 7870-5:2014 | Control charts — Part 5: Specialized control charts |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| UNE-EN ISO 80369-20:2015 | Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015) |
| ISO 11843-6:2013 | Capability of detection Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations |
| ISO 11462-2:2010 | Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
| ISO 25337:2010 | Plastics Production quality control Statistical method for using single measurements |
| ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
| ISO 80369-20:2015 | Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| BS EN ISO 10723:2012 | Natural gas. Performance evaluation for analytical systems |
| UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| EN ISO 10723:2012 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| EN ISO 80369-20:2015 | Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015) |
| ANSI S12-3 : 1985 | STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| BS ISO 16269-4:2010 | Statistical interpretation of data Detection and treatment of outliers |
| UNI ISO/TR 22514-4 : 2010 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 4: PROCESS CAPABILITY ESTIMATES AND PERFORMANCE MEASURES |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| I.S. CEN TR 14547:2006 | SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES |
| 07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
| ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| 11/30213827 DC : 0 | BS EN ISO 10723 - NATURAL GAS - PERFORMANCE EVALUATION FOR ON-LINE ANALYTICAL SYSTEMS |
| UNI ISO 3951-1 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
| DIN EN ISO 80369-20:2015-09 | Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015); German version EN ISO 80369-20:2015 |
| 15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
| BS ISO 7870-5:2014 | Control charts Specialized control charts |
| 12/30058092 DC : 0 | BS ISO 7870-5 - CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
| I.S. EN ISO 80369-20:2015&LC:2015 | SMALL-BORE CONNECTORS FOR LIQUIDS AND GASES IN HEALTHCARE APPLICATIONS - PART 20: COMMON TEST METHODS (ISO 80369-20:2015) |
| BS ISO 22514-3:2008 | Statistical methods in process management. Capability and performance Machine performance studies for measured data on discrete parts |
| 17/30349157 DC : 0 | BS ISO 8559-3 - SIZE DESIGNATION OF CLOTHES - PART 3: METHODOLOGY OF THE CREATION OF THE BODY MEASUREMENT TABLES AND INTERVALS |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BS ISO 22514-4:2016 | Statistical methods in process management. Capability and performance Process capability estimates and performance measures |
| 03/102177 DC : DRAFT OCT 2003 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| BS ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ANSI S12-3 : 1985 : R2006 | STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT |
| UNI ISO/TR 8550-1 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING |
| UNI ISO 7870-5 : 2014 | CONTROL CHARTS - PART 5: SPECIALIZED CONTROL CHARTS |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
| ISO 11843-3:2003 | Capability of detection Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used |
| EN 689:2018 | Workplace exposure - Measurement of exposure by inhalation to chemical agents - Strategy for testing compliance with occupational exposure limit values |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.