• ISO 3951:1989

    Withdrawn A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

    Sampling procedures and charts for inspection by variables for percent nonconforming

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Withdrawn date:  12-09-2018

    Language(s):  English, French

    Published date:  14-09-1989

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Is complementary to ISO 2859. Object of the methods laid down is to ensure that lots of an acceptable quality have a high probability of acceptance and that the probability of rejection of inferior lots is as high as possible. To be used under the following conditions: inspection procedure to be applied to a continuous series of lots of discrete products supplied by one producer using one production process; only a single quality characteristic is considered which must be measurable on a continuous scale; production is stable and quality characteristic is distributed normally; a contract or standard defines an upper and/or a lower specification limit.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 69/SC 5
    Development Note Also numbered as BS 6002-1(1993). (06/2004)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Withdrawn
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ISO 8255-2:2013 Microscopes Cover glasses Part 2: Quality of materials, standards of finish and mode of packaging
    05/30137420 DC : DRAFT AUG 2005 IEC 60086-1 - PRIMARY BATTERIES - PART 1: GENERAL
    XP CEN ISO/TS 15876-7 : 2004 XP PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS ISO 2113:1996 Reinforcement fibres. Woven fabrics. Basis for a specification
    99/123581 DC : DRAFT OCT 1999 ISO/DIS 4633 - RUBBER SEALS - JOINT RINGS FOR WATER SUPPLY, DRAINAGE AND SEWERAGE PIPELINES - SPECIFICATION FOR MATERIALS
    10/30233182 DC : 0 BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
    ASTM F 2407 : 2006 : R2013 : EDT 1 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
    10/30233189 DC : 0 BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
    VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    BS ISO 13448-1 : 2005 ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLE (APP) - PART 1: GUIDELINES FOR THE APP APPROACH
    ASTM C 1448/C1448M : 2005 Standard Specification for Non-Asbestos Fiber-Cement Conduit
    DD ENV 1006 : 2003 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
    05/30127247 DC : DRAFT JAN 2005 ISO 16149 - AGRICULTURAL IRRIGATION EQUIPMENT - PVC ABOVE-GROUND LOW PRESSURE SURFACE IRRIGATION PIPE - SPECIFICATIONS AND TEST METHODS
    CEI EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    CEI EN 60300-3-2 : 2006 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    CSA C1325 : 1999 : R2016 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    CAN/CSA-ISO/IEC 15426-1-07 (R2017) Information Technology - Automatic Identification and Data Capture Techniques - Bar Code Verifier Conformance Specification - Part 1: Linear Symbols (Adopted ISO/IEC 15426-1:2006, second edition, 2006-06-01)
    XP CEN ISO/TS 15874-7 : 2004 XP PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ASTM C 1449/C1449M : 2005 : REV A Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
    I.S. EN 60704-3:2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES
    ASTM C 1447/C1447M : 2004 : EDT 1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
    ASTM C 1447/C1447M : 2004 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
    ISO 2067:1998 Granulated cork Sampling
    I.S. EN 61325:1997 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    I.S. EN 2240-001:2009 AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    UNE-ISO 2859-1:2012 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
    IEC 60810:2017 Lamps, light sources and LED packages for road vehicles - Performance requirements
    ASTM C 1185 : 2008 : R2012 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
    ASTM C 1450/C1450M : 2004 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
    ASTM C 1185 : 2008 : R2016 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
    EN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    DIN EN 326-3 E : 2004 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
    BS EN 14020-3:2002 Reinforcements. Specification for textile glass rovings Specific requirements
    BS EN 326-3 : 2003 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
    BS EN ISO/IEC 15415 : 2005 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS
    BS EN ISO/IEC 15416 : 2002 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS
    BS EN 681-2 : 2000 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
    BS EN 681-1:1996 (published 2006-03) Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
    EN 61897 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    VDE 0212-3 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    DIN EN ISO 186:2002-08 Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002
    ANSI X9.100-20 : 2015 PRINT AND TEST SPECIFICATIONS FOR MAGNETIC INK PRINTING (MICR) - PART 1: PRINT SPECIFICATIONS - PART 2: CONFORMANCE TESTING - PART 3: SECONDARY REFERENCE DOCUMENTS
    EN 60810 : 2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    DIN EN ISO 6497:2005-06 Animal feeding stuffs - Sampling (ISO 6497:2002); German version EN ISO 6497:2005
    EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
    EN 61284 : 1997 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    EN 13084-5:2005/AC:2006 FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS
    EN 12763 : 2000 FIBRE-CEMENT PIPES AND FITTINGS FOR DISCHARGE SYSTEMS FOR BUILDINGS - DIMENSIONS AND TECHNICAL TERMS OF DELIVERY
    I.S. EN IEC 60810:2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    I.S. EN ISO/TS 15876-7:2004 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS EN 61854 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    BS ISO 16149 : 2006 AGRICULTURAL IRRIGATION EQUIPMENT - PVC ABOVE-GROUND LOW-PRESSURE PIPE FOR SURFACE IRRIGATION - SPECIFICATIONS AND TEST METHODS
    BS 6428(1983) : 1983 METHOD FOR SAMPLING EMPTY SACKS FOR TESTING
    05/30134607 DC : DRAFT JUNE 2005 ISO 22110 - MILK AND MILK PRODUCTS - SAMPLING - INSPECTION BY VARIABLES IN THE PRESENCE OF MEASUREMENT ERROR
    NF EN 2240-001 : 2010 AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    16/30337687 DC : 0 BS ISO 9788 - AIR CARGO - DOUBLE STUD TIE-DOWN FITTINGS - DESIGN AND TESTING REQUIREMENTS
    08/30183116 DC : DRAFT AUG 2008 BS EN 459-1 - BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
    DIN 1057-2:1985-07 BUILDING MATERIALS FOR FREE-STANDING CHIMNEYS - LINING BLOCKS - REQUIREMENTS, TESTING, INSPECTION
    03/102154 DC : DRAFT MAY 2003 CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    10/30209149 DC : 0 BS EN ISO/IEC 15415 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS
    ASTM C 1185 : 2008 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
    DD ENV 459-1 : 1995 BUILDING LIME - DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
    05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
    I.S. EN 60432-1:2004 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999 (MOD))
    CSA ISO/IEC 15426-1 : 2007 : R2012 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS
    DD CEN/TS 12201-7 : 2003 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    PREN 492 : DRAFT 2010 FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
    UNI ISO 11462-1 : 2014 GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC
    CEI EN 61284 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    CEI EN 61325 : 1998 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    I.S. EN 61897:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    CEN/TS 1456-2 : 2003 PLASTICS PIPING SYSTEMS FOR UNDERGROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    BS EN 60432-1 : 2000 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    EI 1584 : 2017 FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS
    ISO 9788:2017 Air cargo — Double stud tie-down fittings — Design and testing requirements
    DD CEN/TS 1456-2 : 2003 PLASTIC PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ASTM F 2407 : 2006 Standard Specification for Surgical Gowns Intended for Use in Healthcare Facilities
    ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 7: Guidance for the assessment of conformity
    ISO 7749-1:1995 Agricultural irrigation equipment Rotating sprinklers Part 1: Design and operational requirements
    ISO 10290:1993 Textiles Cotton yarns Specifications
    DIN EN 1916:2003-04 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 12654-2:1998-12 Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998
    DIN EN 1917:2003-04 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 326-3:2004-02 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
    EN 61854 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    BS EN 13084-5:2005 Free-standing chimneys Material for brick liners. Product specifications
    IEC 61897:1998 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
    BS EN 588-1 : 1997 FIBRE-CEMENT PIPES FOR SEWERS AND DRAINS - PART 1: PIPES, JOINTS AND FITTINGS FOR GRAVITY SYSTEMS
    DIN EN 681-1:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
    EN 1917:2002/AC:2008 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN ISO-IEC 15416 E : 2002 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS
    EN 1916:2002/AC:2008 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    I.S. EN 326-3:2003 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
    DIN EN 681-4:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements
    DIN EN 681-3:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber
    I.S. EN ISO/IEC 15415:2005 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS
    DIN EN 206-1:2001-07 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    DIN EN 681-2:2006-11 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers
    DIN EN 61284 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    VDE 0212-1 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    DIN V ENV 1452-7:2001-03 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Elements of SPC
    16/30334770 DC : 0 BS EN 60704-3 ED 3.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES
    03/312758 DC : DRAFT AUG 2003 ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE
    I.S. EN 206-1:2002 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY (INCLUDING IRISH NATIONAL ANNEX)
    DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    BS ISO 8007-3 : 2004 CARBONACEOUS MATERIALS USED IN THE PRODUCTION OF ALUMINIUM - SAMPLING PLANS AND SAMPLING FROM INDIVIDUAL UNITS - PART 3: SIDEWALL BLOCKS
    I.S. ENV 1452-7:2000 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    NF EN 163 : 1991 CERAMIC TILES - SAMPLING AND BASIS FOR ACCEPTANCE
    05/30132248 DC : DRAFT APR 2005 EN 14547 - SAMPLING SCHEMES FOR THIRD PARTY CONFORMITY ASSESSMENT OF FINENESS IN PRECIOUS METAL ARTICLES
    ISO 22702:2003 Utility lighters General consumer-safety requirements
    06/30156380 DC : DRAFT SEP 2006 BS ISO 1795 - RUBBER, RAW NATURAL AND RAW SYNTHETIC - SAMPLING AND FURTHER PREPARATIVE PROCEDURES
    PREN 12467 : DRAFT 2010 FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
    GOST ISO/IEC 15426-1 : 2003 AUTOMATIC IDENTIFICATION - BAR CODING - LINEAR BAR CODE SYMBOLS VERIFIER - CONFORMITY REQUIREMENTS
    DD ENV 1452-7 : 2001 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    04/30112025 DC : DRAFT APR 2004 ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
    BS EN 60383-1 : 1998 INSULATORS FOR OVERHEAD LINES WITH NOMINAL VOLTAGE ABOVE 1 KV - PART 1: CERAMIC OR GLASS INSULATOR UNITS FOR A.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    02/121978 DC : DRAFT APR 2002 ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS
    BS ISO/IEC 15426-1:2006 Information technology. Automatic identification and data capture techniques. Bar code verifier conformance specification Linear symbols
    PREN 2240-001 : 200P2 AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    PREN 2962 : 200P1 AEROSPACE SERIES - CARBON FIBRE FILAMENT YARN (POLYACRYLONITRILE PRECURSOR) - TECHNICAL SPECIFICATION
    EN ISO/TS 15876-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ASTM C 1450/C1450M : 2004 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
    DD ENV 1401-2 : 2001 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - GUIDANCE FOR ASSESSMENT OF CONFORMITY
    I.S. EN 60810:2015 LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    NF ENV 459-1 : 95 FD BUILDING LIME - PART 1: DEFINITIONS, SPECIFICATIONS AND CONFORMITY CRITERIA
    I.S. EN 27574-4:1991 ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES
    I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
    I.S. EN 27574-1:1991 ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS
    BS EN IEC 60810:2018 Lamps, light sources and led packages for road vehicles. Performance requirements
    BS ISO 10290:1993 Textiles. Cotton yarns. Specifications
    I.S. CEN TS 13244-7:2003 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    NF EN 61284 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    ASTM C 1449/C1449M : 2005 : REV A : R2014 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
    ISO/TS 15874-7:2003 Plastics piping systems for hot and cold water installations Polypropylene (PP) Part 7: Guidance for the assessment of conformity
    ISO/TS 15876-7:2003 Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity
    CEN ISO/TS 15875-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN 1917:2002 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    DIN EN 13084-5:2005-12 Free-standing chimneys - Part 5: Material for brick liners - Product specifications
    NF EN 60086-1 : 2011 PRIMARY BATTERIES - PART 1: GENERAL
    DIN EN 681-1:2016-07 (Draft) Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber; German and English version prEN 681-1:2016
    DIN EN 512:1994-11 FIBRE-CEMENT PRODUCTS - PRESSURE PIPES AND JOINTS
    DIN EN ISO 5555:2014-10 ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING (ISO 5555:2001 + AMD 1:2014)
    DIN EN 682:2006-10 Elastomeric seals - Material requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids
    BS EN 681-4 : 2000 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
    ISO 7574-1:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General considerations and definitions
    ONORM B 4710-2 : 2008 CONCRETE - PART 2: LIGHTWEIGHT CONCRETE WITH CLOSED STRUCTURES AND A MINIMUM DRY DENSITY OF 800 KG/M[3] - SPECIFICATION, PRODUCTION, USE AND PROOF OF CONFORMITY - RULES FOR THE IMPLEMENTATION OF ONORM EN 206-1 FOR LIGHTWEIGHT CONCRETE
    I.S. EN ISO/IEC 15416:2002 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS
    UNI EN 13084-5 : 2005 FREE-STANDING CHIMNEYS - PART 5: MATERIAL FOR BRICK LINERS - PRODUCT SPECIFICATIONS
    UNI EN 1917 : 2004 CONCRETE MANHOLES AND INSPECTION CHAMBERS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    BS 4778-2:1991 QUALITY VOCABULARY - PART 2: QUALITY CONCEPTS AND RELATED DEFINITIONS
    EN 14020-3:2002 Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements
    UNI EN 1916 : 2004 CONCRETE PIPES AND FITTINGS, UNREINFORCED, STEEL FIBRE AND REINFORCED
    UNI EN ISO 5555 : 2014 ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING - AMENDMENT 1: FLEXITANKS
    ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC
    03/102273 DC : DRAFT MAR 2003 BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH
    15/30303461 DC : 0 BS EN 16907-5 - EARTHWORKS - PART 5: QUALITY CONTROL
    PREN 295-2 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    10/30233185 DC : 0 BS EN 12467 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
    BS 6002(1979) : 1979 SPECIFICATION FOR SAMPLING PROCEDURES AND CHARTS FOR INSPECTION BY VARIABLES FOR PERCENT DEFECTIVE
    BS 6068-4.10(1999) : 1999 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA IN SURFACE AND WASTE WATER - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR THE DETECTION AND ENUMERATION OF E. COLI IN SURFACE AND WASTE WATER
    10/30216987 DC : 0 BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
    12/30257889 DC : 0 BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    94/110814 DC : DRAFT JAN 1995 ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS
    BS ISO 9788:2017 Air cargo. Double stud tie-down fittings. Design and testing requirements
    07/30150572 DC : 0 ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS
    BS 6002-4.1(1994) : 1994 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - SPECIFICATION FOR SEQUENTIAL SAMPLING PLANS FOR PERCENT NONCONFORMING - KNOWN STANDARD DEVIATION
    BS EN 2240-001 : 2009 AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    DD CEN ISO/TS 15874-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS 7459-1(1991) : 1991 ROTATING SPRINKLERS FOR IRRIGATION EQUIPMENT - SPECIFICATION FOR DESIGN AND OPERATIONAL REQUIREMENTS
    BS EN 60300-3-2 : 2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    XP PREN 2240-001 : 1997 XP AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    NF ISO/IEC 15426-1 : 2004 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS
    ISO 16149:2006 Agricultural irrigation equipment PVC above-ground low-pressure pipe for surface irrigation Specifications and test methods
    PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    98/108338 DC : DRAFT OCT 1998 PREN 13084-5 - FREE-STANDING INDUSTRIAL CHIMNEYS - PART 5: MATERIALS FOR BRICK LINERS - PRODUCT SPECIFICATIONS
    PREN 3675 : 200P1 AEROSPACE SERIES - SAMPLING PLAN FOR ACCEPTANCE TESTING OF ARAMID, CARBON FIBRE AND TEXTILE GLASS FILAMENT YARNS
    I.S. EN 74:1989 COUPLERS, LOOSE SPIGOTS AND BASE-PLATES FOR USE IN WORKING SCAFFOLDS AND FALSEWORK MADE OF STEEL TUBES - REQUIREMENTS AND TEST PROCEDURES
    EN IEC 60810:2018 LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS (IEC 60810:2017)
    I.S. ENV 1006:2003 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES
    BS ISO 6497:2002 Animal feeding stuffs. Sampling
    EN 512:1994/A1:2001 FIBRE-CEMENT PRODUCTS - PRESSURE PIPES AND JOINTS
    S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    ASTM C 1448/C1448M : 2005 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Conduit
    XP CEN/TS 13244-7 : 2004 XP PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO 23711:2003 Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
    I.S. CEN TS 12201-7:2003 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO/IEC 15426-1:2006 Information technology Automatic identification and data capture techniques Bar code verifier conformance specification Part 1: Linear symbols
    I.S. EN ISO/TS 15875-7:2004 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSSLINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    IEC 61854:1998 Overhead lines - Requirements and tests for spacers
    DIN EN ISO 186 E : 2002 PAPER AND BOARD - SAMPLING TO DETERMINE AVERAGE QUALITY
    16/30350012 DC : 0 BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    BS EN ISO 1886:1995 REINFORCEMENT FIBRES - SAMPLING PLANS APPLICABLE TO RECEIVED BATCHES
    IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
    IEC 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values
    IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
    BS EN 12654-2 : 1999 TEXTILE GLASS - YARNS - METHODS OF TEST AND GENERAL SPECIFICATIONS
    BS EN 12763 : 2000 FIBRE-CEMENT PIPES AND FITTINGS FOR DISCHARGE SYSTEMS FOR BUILDINGS - DIMENSIONS AND TECHNICAL TERMS OF DELIVERY
    BS EN 206-1 : 2000 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    BS EN 681-3 : 2000 ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER
    ISO 7574-4:1985 Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 4: Methods for stated values for batches of machines
    BS EN 1635 : 1998 BAR CODING - TEST SPECIFICATIONS - BAR CODE SYMBOLS
    ISO 6497:2002 Animal feeding stuffs Sampling
    BS EN 512:1995 (published 2002-01) Fibre-cement products. Pressure pipes and joints
    BS EN ISO 7899-1 : 1999 WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI IN SURFACE AND WASTE WATER - MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR SURFACE AND WASTE WATER
    BS EN 14020-2:2002 Reinforcements. Specification for textile glass rovings Methods of test and general requirements
    BS EN ISO 6497 : 2005 ANIMAL FEEDING STUFFS - SAMPLING
    BS EN ISO 186:2002 Paper and board. Sampling to determine average quality
    BS EN 60810 : 2015 LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS
    ISO 5555:2001 Animal and vegetable fats and oils — Sampling
    BS EN ISO 9308-3 : 1999 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA IN SURFACE AND WASTE WATER - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR THE DETECTION AND ENUMERATION OF E. COLI IN SURFACE AND WASTE WATER
    BS EN 682:2002 (published 2006-03) Elastomeric seals. Materials requirements for seals used in pipes and fi ttings carrying gas and hydrocarbon fluids
    BS EN 13975 : 2003 SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF IN VITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS
    BS EN 1917:2002 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced
    EN 681-1:1996/A3:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER
    EN 681-4:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 4: CAST POLYURETHANE SEALING ELEMENTS
    EN 74 : 1988 COUPLERS, LOOSE SPIGOTS & BASE PLATES FOR USE IN WORKING SCAFFOLDS & FALSEWORK MADE OF STEEL TUBES - REQUIREMENTS & TEST PROCEDURES
    EN 2240-001 : 2009 AEROSPACE SERIES - LAMPS, INCANDESCENT - PART 001: TECHNICAL SPECIFICATION
    EN 27574-4 : 1988 ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - PART 4: METHODS FOR STATED VALUES FOR BATCHES OF MACHINES
    EN ISO 9308-3:1998/AC:2000 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) BY INOCULATION IN LIQUID MEDIUM
    EN 1635 : 1997 BAR CODING - TEST SPECIFICATIONS - BAR CODE SYMBOLS
    EN ISO 186 : 2002 Paper and board - Sampling to determine average quality (ISO 186:2002)
    EN 27574-1 : 1988 ACOUSTICS - STATISTICAL METHODS FOR DETERMINING AND VERIFYING STATED NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT - GENERAL CONSIDERATIONS AND DEFINITIONS
    EN 681-3:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 3: CELLULAR MATERIALS OF VULCANIZED RUBBER
    EN 14020-2:2002 Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements
    EN 588-1 : 1996 FIBRE-CEMENT PIPES FOR SEWERS AND DRAINS - PART 1: PIPES, JOINTS AND FITTINGS FOR GRAVITY SYSTEMS
    EN ISO 7899-1:1998/AC:2000 WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI - PART 1: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR SURFACE AND WASTE WATER
    EN 326-3 : 2003 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
    EN ISO/TS 15877-7 : 2003 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 27023 : 1992 PACKAGING - SACKS - METHOD OF SAMPLING EMPTY SACKS FOR TESTING
    EN 682:2002/A1:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
    EN ISO/IEC 15415:2005/AC:2011 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS
    EN ISO/IEC 15416 : 2001 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - LINEAR SYMBOLS (ISO/IEC 15416:2000)
    EN ISO 6497 : 2005 ANIMAL FEEDING STUFFS - SAMPLING
    EN 13975 : 2003 SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF IN VITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS
    EN 681-2:2000/A2:2005 ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS
    EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    ISO 8007-3:2003 Carbonaceous materials used in the production of aluminium Sampling plans and sampling from individual units Part 3: Sidewall blocks
    02/121776 DC : DRAFT APR 2002 PREN 14403 - SAMPLING OF THE PRECIOUS METAL ALLOYS IN JEWELLERY AND ASSOCIATED PRODUCTS
    BS ISO 8255-2 : 2013 MICROSCOPES - COVER GLASSES - PART 2: QUALITY OF MATERIALS, STANDARDS OF FINISH AND MODE OF PACKAGING
    NF EN 61897 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    BS EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
    BS EN 61284 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
    09/30210295 DC : DRAFT SEP 2009 BS EN 60086-3 - PRIMARY BATTERIES - PART 3: WATCH BATTERIES
    CEI UNI EN ISO 15415 : 2012 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE PRINT QUALITY TEST SPECIFICATION - TWO-DIMENSIONAL SYMBOLS
    BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
    DD CEN/TS 13244-7 : 2003 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. EN ISO/TS 15874-7:2004 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS POLYPROPYLENE (PP) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS ISO 22702 : 2003 UTILITY LIGHTERS - GENERAL CONSUMER-SAFETY REQUIREMENTS
    ASTM C 1447/C1447M : 2004 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
    NF EN 60432-1 : 2001 AMD 2 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    NF ISO 2067 : 2002 GRANULATED CORK - SAMPLING
    NF EN ISO/TS 15877-7 : 2004 XP PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    07/30169285 DC : 0 BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS
    DEFSTAN 00-42(PT1)/2(2008) : 2008 RELIABILITY AND MAINTAINABILITY (R&M) ASSURANCE ACTIVITY - PART 1: ONE-SHOT DEVICES/SYSTEMS
    03/108624 DC : DRAFT JULY 2003 IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
    98/402025 DC : DRAFT JAN 1998 BS ISO 13448-1 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION-OF-PRIORITIES PRINCIPLE (APP) - PART 1: GUIDE TO THE APP APPROACH
    CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    00/564528 DC : DRAFT SEP 2000 BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS
    03/109038 DC : DRAFT MAY 2003 ISO 9163 - TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS
    ASTM C 1448/C1448M : 2005 : R2010 Standard Specification for Non-Asbestos Fiber-Cement Conduit
    CSA ISO/IEC 15426-1 : 2007 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - BAR CODE VERIFIER CONFORMANCE SPECIFICATIONS - PART 1: LINEAR SYMBOLS
    07/30152250 DC : 0 BS ISO 11596 - SAMPLING OF THE PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS
    PREN 494 : DRAFT 2010 FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS
    ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    CSA C1325 : 1999 : R2011 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
    XP CEN ISO/TS 15875-7 : 2004 XP PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CROSS LINKED POLYETHYLENE (PE-X) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    I.S. CEN TS 1456-2:2003 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    ISO 2113:1996 Reinforcement fibres Woven fabrics Basis for a specification
    ISO 13448-1:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach
    ASTM C 1449/C1449M : 2005 : REV A : R2010 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
    CEI EN 60704-3 : 2007 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 3: PROCEDURE FOR DETERMINING AND VERIFYING DECLARED NOISE EMISSION VALUES
    ASTM C 1450/C1450M : 2004 : R2014 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
    BS EN 60704-3:2006 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise Procedure for determining and verifying declared noise emission values
    I.S. EN ISO/TS 15877-7:2004 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - CHLORINATED POLY(VINYL CHLORIDE) (PVC-C) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    BS EN 1916:2002 Concrete pipes and fittings, unreinforced, steel fibre and reinforced
    ISO 1886:1990 Reinforcement fibres Sampling plans applicable to received batches
    BS EN ISO 5555 : 2002 ANIMAL AND VEGETABLE FATS AND OILS - SAMPLING
    ISO 7023:1983 Packaging Sacks Method of sampling empty sacks for testing
    ISO 186:2002 Paper and board Sampling to determine average quality
    EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
    CEN/TS 13244-7 : 2003 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
    EN 61325 : 1995 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
    EN 12654-2:1998 Textile glass - Yarns - Part 2: Methods of test and general specifications
    EN 60704-3:2006 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3534:1977 Statistics Vocabulary and symbols
    ISO 2854:1976 Statistical interpretation of data Techniques of estimation and tests relating to means and variances
    ISO 5479:1997 Statistical interpretation of data — Tests for departure from the normal distribution
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective