• There are no items in your cart

ISO 6980-1:2006

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Nuclear energy — Reference beta-particle radiation — Part 1: Methods of production

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

01-11-2022

Superseded by

ISO 6980-1:2022

Language(s)

English, French

Published date

07-08-2006

€60.00
Excluding VAT

ISO 6980-1:2006 specifies the requirements for reference beta radiation fields produced by radionuclide sources to be used for the calibration of personal and area dosimeters and dose-rate meters to be used for the determination of the quantities Hp(0,07) and H'(0,07), and for the determination of their response as a function of beta particle energy and angle of incidence. It gives the characteristics of radionuclides that have been used to produce reference beta radiation fields, gives examples of suitable source constructions and describes methods for the measurement of the residual maximum beta particle energy and the dose equivalent rate at a depth of 0,07 mm in the International Commission on Radiation Units and Measurements (ICRU) sphere. The energy range involved lies between 66 keV) and 3,6 MeV and the dose equivalent rates are in the range from about 10-5Sv h-1 to at least 10 Sv h-1. In addition, for some sources variations of the dose equivalent rate as a function of the angle of incidence are given.

ISO 6980-1:2006 proposes two series of beta reference radiation fields from which the radiation necessary for determining the characteristics (calibration and energy and angular dependence of response) of an instrument can be selected.

Series 1 reference radiation fields are produced by radionuclide sources used with beam flattening filters designed to give uniform dose equivalent rates over a large area at a specified distance. The proposed sources of 90Sr + 90Y, 85Kr, 204Tl and 147Pm produce maximum dose equivalent rates of approximately 200 mSv h-1.

Series 2 reference radiation fields are produced without the use of beam-flattening filters, which allows large area planar sources and a range of source-to-calibration plane distances to be used. Close to the sources, only relatively small areas of uniform dose rate are produced but this series has the advantage of extending the energy and dose rate ranges beyond those of series 1. The radionuclides used are those of series 1 with the addition of the radionuclides 14C and 106Ru + 106Rh; these sources produce dose equivalent rates of up to 10 Sv h-1.

DevelopmentNote
Supersedes ISO/DIS 6980-1 (08/2006) Together with ISO 6980-2 and ISO 6980-3, supersedes ISO 6980 (09/2006)
DocumentType
Standard
Pages
13
ProductNote
This standard is also refers to ICRP 60:1991,ICRU 56:1997,ICRU 44:1989,ICRU 31:1979,ICRU 37:1984,ICRU 39:1985,
PublisherName
International Organization for Standardization
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
IS 17994 : Part 1 : 2022 Identical
NF ISO 6980-1 : 2006 Identical
BS ISO 6980-1:2006 Identical
UNI ISO 6980-1 : 2008 Identical

BS EN 60846-1:2014 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors
DIN EN ISO 29661 : 2018 COR 1 2018 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015)
16/30332952 DC : 0 BS ISO 14146 - RADIATION PROTECTION - CRITERIA AND PERFORMANCE LIMITS FOR THE PERIODIC EVALUATION OF DOSIMETRY SERVICES
BS ISO 20785-2 : 2011 DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE
07/30150067 DC : 0 BS IEC 60846-1 - RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
BS EN 62387:2016 Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation
EN ISO 20785-2:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
BS EN ISO 29661:2017 Reference radiation fields for radiation protection. Definitions and fundamental concepts
BS EN ISO 20785-2:2017 Dosimetry for exposures to cosmic radiation in civilian aircraft Characterization of instrument response
I.S. EN 62387-1:2012 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD))
EN 62387-1:2012 Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements
EN 62387:2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED)
11/30245877 DC : 0 BS EN 62387 - RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR PERSONAL AND ENVIRONMENTAL MONITORING
CEI EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
IEC 60846-1:2009 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors
IEC 61526:2010 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ASTM E 2216 : 2002 : R2008 Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
BS ISO 6980-3:2006 Nuclear energy. Reference beta-particle radiation Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
BS ISO 12749-2:2013 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Radiological protection
04/30126462 DC : DRAFT DEC 2004 BS ISO 6980-3 - REFERENCE BETA-PARTICLE RADIATIONS - PART 3: CALIBRATION OF AREA AND PERSONAL DOSIMETERS AND THE DETERMINATION OF THEIR RESPONSE AS A FUNCTION OF BETA RADIATION ENERGY AND ANGLE OF INCIDENCE
BS EN 61526:2013 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
I.S. EN 60846-1:2014 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
ISO 29661:2012 Reference radiation fields for radiation protection — Definitions and fundamental concepts
I.S. EN ISO 29661:2017 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015)
IEC 60532:2010 Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
12/30247768 DC : 0 BS ISO 12749-2 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 2: RADIOLOGICAL PROTECTION
BS EN 62387-1:2012 Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements
ISO 6980-3:2006 Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
13/30278063 DC : 0 BS ISO 20785-3 - DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 3: MEASUREMENTS AT AVIATION ALTITUDES
08/30157876 DC : 0
BS ISO 29661 : 2012 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS
09/30150998 DC : 0
EN ISO 29661:2017 Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015)
IEC 62387-1:2007 Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements
ASTM E 2216 : 2002 : R2013 Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
ISO 12749-2:2013 Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection
ISO 20785-2:2011 Dosimetry for exposures to cosmic radiation in civilian aircraft Part 2: Characterization of instrument response
EN 61526:2013 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
DIN ISO 20785-2:2016-08 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
VDE 0412-661 : 2018 COR 1 2018 REFERENCE RADIATION FIELDS FOR RADIATION PROTECTION - DEFINITIONS AND FUNDAMENTAL CONCEPTS (ISO 29661:2012, INCLUDING AMD 1:2015)
BS IEC 60532:2010 Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
UNI ISO 6980-3 : 2008 NUCLEAR ENERGY - REFERENCE BETA-PARTICLE RADIATION - PART 3: CALIBRATION OF AREA AND PERSONAL DOSIMETERS AND THE DETERMINATION OF THEIR RESPONSE AS A FUNCTION OF BETA RADIATION ENERGY AND ANGLE OF INCIDENCE
I.S. EN ISO 20785-2:2017 DOSIMETRY FOR EXPOSURES TO COSMIC RADIATION IN CIVILIAN AIRCRAFT - PART 2: CHARACTERIZATION OF INSTRUMENT RESPONSE (ISO 20785-2:2011)
I.S. EN 62387:2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION
UNE-EN ISO 20785-2:2018 Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO 20785-2:2011)
ASTM E 2216 : 2002 Standard Guide for Evaluating Disposal Options for Concrete from Nuclear Facility Decommissioning
I.S. EN 61526:2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD))
EN 60846-1:2014 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors

ISO 6980-3:2006 Nuclear energy — Reference beta-particle radiation — Part 3: Calibration of area and personal dosemeters and the determination of their response as a function of beta radiation energy and angle of incidence
ISO 6980-2:2004 Nuclear energy — Reference beta-particle radiation — Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field
IEC 60846:2002 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.