ISO/IEC 18000-6:2013
Current
The latest, up-to-date edition.
Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
16-01-2013
ISO/IEC 18000-6:2013 defines the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards.
It is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.
ISO/IEC 18000-6:2013 together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 and ISO/IEC 18000-64 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) or tag-only-talks-after-listening (TOTAL) RFID system. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator, or TOTAL, meaning that a tag modulates its antenna reflection coefficient with an information signal upon entering an Interrogator's field after first listening for Interrogator modulation in order to determine if the system is ITF or not.
ISO/IEC 18000-6:2013 contains one mode with four types. The detailed technical differences between the four types are shown in the associated parameter tables.
Types A, B and C are ITF. Type A uses Pulse-Interval Encoding (PIE) in the forward link and an adaptive ALOHA collision-arbitration algorithm. Type B uses Manchester in the forward link and an adaptive binary-tree collision-arbitration algorithm. Type C uses PIE in the forward link and a random slotted collision-arbitration algorithm.
Type D is TOTAL based on Pulse Position Encoding or Miller M=2 encoded subcarrier.
Committee |
ISO/IEC JTC 1/SC 31
|
DevelopmentNote |
Together with ISO/IEC 18000-61, ISO/IEC 18000-62, ISO/IEC 18000-63 & ISO/IEC 18000-64, it supersedes ISO/IEC 18000-6:2010. (03/2013)
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
BS ISO/IEC 18000-6:2013 | Identical |
GOST R ISO/IEC 18000-6 : 2013 | Identical |
NEN ISO/IEC 18000-6 : 2013 | Identical |
CSA ISO/IEC 18000-6 : 2015 | Identical |
CSA ISO/IEC 18000-6:15 (R2019) | Identical |
CSA ISO/IEC 18000-6A : 2007(R2010) | Identical |
STANAG 2233 : 2010 | NATO CONSIGNMENT AND ASSET TRACKING BY RADIO-FREQUENCY IDENTIFICATION |
BS ISO/IEC 29176:2011 | Information technology. Mobile item identification and management. Consumer privacy-protection protocol for Mobile RFID services |
11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
BS ISO/IEC 29133:2010 | Information technology. Automatic identification and data capture techniques. Quality test specification for rewritable hybrid media data carriers |
10/30201740 DC : 0 | BS ISO/IEC 18046-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
BS ISO/IEC 29175:2012 | Information technology. Mobile item identification and management. User data for Mobile AIDC services |
BS ISO 18382:2013 | Space data and information transfer systems. Spacecraft onboard interface services. RFID-based inventory management systems |
BS EN 16571:2014 | Information technology. RFID privacy impact assessment process |
CSA ISO/IEC 18046 : 2008 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS |
SAE AS 5678 : 2015 | PASSIVE RFID TAGS INTENDED FOR AIRCRAFT USE |
05/30142122 DC : DRAFT NOV 2005 | ISO 21849 - AIRCRAFT AND SPACE - INDUSTRIAL DATA - PRODUCT IDENTIFICATION AND TRACEABILITY |
11/30216820 DC : 0 | BS ISO 17366 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT PACKAGING |
BS ISO/IEC 29167-1:2012 | Information technology. Automatic identification and data capture techniques Air interface for security services and file management for RFID architecture |
ISO/IEC TR 20017:2011 | Information technology Radio frequency identification for item management Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators |
CEN/TR 16670:2014 | Information technology - RFID threat and vulnerability analysis |
PD ISO/IEC TR 18046:2005 | Information technology. Automatic identification and data capture techniques. Radio frequency identification device performance test methods |
BS ISO/IEC 18046-2:2011 | Information technology. Radio frequency identification device performance test methods Test methods for interrogator performance |
09/30214220 DC : 0 | BS IEC TR 61000-2-5 ED - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 2-5: ENVIRONMENT - CLASSIFICATION OF ELECTROMAGNETIC ENVIRONMENTS |
BS ISO/IEC 15961-1:2013 | Information technology. Radio frequency identification (RFID) for item management: Data protocol Application interface |
CSA ISO/IEC 18046-3 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAG PERFORMANCE |
BS ISO 26683-2:2013 | Intelligent transport systems. Freight land conveyance content identification and communication Application interface profiles |
CSA ISO/IEC TR 18047-6 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
CEN/TR 16669:2014 | Information technology - Device interface to support ISO/IEC 18000-3 |
PD ISO/IEC TR 18047-6:2011 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz |
CSA ISO/IEC TR 18001:2005 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - APPLICATION REQUIREMENTS PROFILES |
CAN/CSA-ISO/IEC 18046-1:13 (R2017) | Information technology - Radio frequency identification device performance test methods - Part 1: Test methods for system performance (Adopted ISO/IEC 18046-1:2011, first edition, 2011-10-15) |
BS EN ISO 17264:2009+A1:2019 | Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces |
CSA ISO/IEC TR 24729-1 : 2014 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - IMPLEMENTATION GUIDELINES - PART 1: RFID-ENABLED LABELS AND PACKAGING SUPPORTING ISO/IEC 18000-6C |
ISO/IEC 29178:2012 | Information technology Mobile item identification and management Service broker for Mobile AIDC services |
ISO/IEC TR 24729-3:2009 | Information technology Radio frequency identification for item management Implementation guidelines Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications |
CSA ISO/IEC TR 20017:14 (R2019) | Information technology - Radio frequency identification for item management - Electromagnetic interference impact of ISO/IEC 18000 interrogator emitters on implantable pacemakers and implantable cardioverter defibrillators (Adopted ISO/IEC TR 20017:2011, first edition, 2011-12-15) |
DIN EN ISO 21007-2:2016-06 | GAS CYLINDERS - IDENTIFICATION AND MARKING USING RADIO FREQUENCY IDENTIFICATION TECHNOLOGY - PART 2: NUMBERING SCHEMES FOR RADIO FREQUENCY IDENTIFICATION (ISO 21007-2:2015) |
10/30208411 DC : 0 | |
BS EN 4817:2012 | Aerospace series. Passive UHF RFID tags intended for aircraft use |
08/30189894 DC : DRAFT SEP 2008 | BS EN ISO 17264 - ROAD TRANSPORT AND TRAFFIC TELEMATICS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - INTERFACES |
09/30192082 DC : 0 | BS ISO/IEC 29160 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT RFID EMBLEM |
09/30189756 DC : 0 | BS ISO/IEC 18000-3-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 3: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 13,56 MHZ |
BS ISO/IEC 18000-3:2010 | Information technology. Radio frequency identification for item management Parameters for air interface communications at 13,56 MHz |
ISO/IEC 24791-5:2012 | Information technology — Radio frequency identification (RFID) for item management — Software system infrastructure — Part 5: Device interface |
11/30216817 DC : 0 | BS ISO 17365 - SUPPLY CHAIN APPLICATIONS OF RFID - TRANSPORT UNITS |
ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
CSA ISO/IEC 19762-3 : 2009 : R2014 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 3: RADIO FREQUENCY IDENTIFICATION (RFID) |
DIN EN 16656 E : 2014 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - RFID EMBLEM (ISO/IEC 29160:2012, MODIFIED) |
BS ISO 20333:2017 | Traditional Chinese medicine. Coding rules for Chinese medicines in supply chain management |
14/30304623 DC : 0 | BS ISO 29404 - SHIPS AND MARINE TECHNOLOGY - SPECIFIC REQUIREMENTS FOR OFFSHORE WIND FARM COMPONENTS - SUPPLY CHAIN INFORMATION FLOW |
BS ISO/IEC 18047-6:2017 | Information technology. Radio frequency identification device conformance test methods Test methods for air interface communications at 860 MHz to 960 MHz |
PD CEN/TR 16670:2014 | Information technology. RFID threat and vulnerability analysis |
10/30208407 DC : 0 | BS ISO/IEC 29173-1 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - MOBILE ITEM IDENTIFICATION AND MANAGEMENT - PART 1: MOBILE RFID INTERROGATOR DEVICE PROTOCOL FOR ISO/IEC 18000-6 TYPE B AND TYPE C |
11/30246900 DC : 0 | BS ISO/IEC 29174-1 - INFORMATION TECHNOLOGY - UII SCHEME AND ENCODING FORMAT FOR MOBILE AIDC SERVICES - PART 1: IDENTIFIER SCHEME FOR MULTIMEDIA INFORMATION ACCESS TRIGGERED BY TAG-BASED IDENTIFICATION |
CSA ISO/IEC TR 18001 : 2005 : R2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - APPLICATION REQUIREMENTS PROFILES |
16/30322561 DC | BS ISO/IEC 19823-10. Information technology. Conformance test methods for security service crypto suites. Part 10. Crypto suite AES-128 |
CSA ISO/IEC 18046-2 : 2013(R2017) | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
CSA ISO/IEC 18046-3 : 2013 : R2017 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAG PERFORMANCE |
CSA ISO/IEC 24791-2:14 (R2019) | Information technology - Radio frequency identification (RFID) for item management - Software system infrastructure - Part 2: Data management (Adopted ISO/IEC 24791-2:2011, first edition, 2011-10-15) |
EN ISO 17264:2009 | Intelligent transport systems - Automatic vehicle and equipment identification - Interfaces (ISO 17264:2009) |
PREN 4817 : 200P1 | AEROSPACE SERIES PASSIVE UHF RFID TAGS INTENDED FOR AIRCRAFT USE |
CSA ISO/IEC TR 18001 : 2005 : R2010 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - APPLICATION REQUIREMENTS PROFILES |
CSA ISO/IEC 18000-3 : 2012 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - PART 3: PARAMETERS FOR AIR INTERFACE COMMUNICATIONS AT 13,56 MHZ |
DIN EN ISO/IEC 19762-3:2012-06 | Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 3: Radio frequency identification (RFID) (ISO/IEC 19762-3:2008) |
TR 101 537 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SECOND CO-EXISTENCE TEST BETWEEN ER-GSM WITH RFID |
ISO 26683-2:2013 | Intelligent transport systems — Freight land conveyance content identification and communication — Part 2: Application interface profiles |
ISO/IEC 19823-13:2018 | Information technology — Conformance test methods for security service crypto suites — Part 13: Cryptographic Suite Grain-128A |
STANAG 4281 : 2016 | NATO STANDARD MARKING FOR SHIPMENT AND STORAGE |
I.S. EN 4817:2012 | AEROSPACE SERIES - PASSIVE UHF RFID TAGS INTENDED FOR AIRCRAFT USE |
CSA ISO/IEC 24791-1:14 (R2019) | Information technology - Radio frequency identification (RFID) for item management - Software system infrastructure - Part 1: Architecture (Adopted ISO/IEC 24791-1:2010, first edition, 2010-08-15) |
CSA ISO/IEC 29143:14 (R2019) | Information technology - Automatic identification and data capture techniques - Air interface specification for Mobile RFID interrogators (Adopted ISO/IEC 29143:2011, first edition, 2011-02-01) |
CSA ISO/IEC 24791-5:14 (R2019) | Information technology - Radio frequency identification (RFID) for item management - Software system infrastructure Part 5: Device interface (Adopted ISO/IEC 24791-5:2012, first edition, 2012-12-15) |
I.S. EN ISO 17264:2009/A1:2019 | INTELLIGENT TRANSPORT SYSTEMS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - INTERFACES |
SR 002 787 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); REPORT FOR CESI-ETSI RFID PLUGTESTSTM EVENT TO INVESTIGATE THE INTEROPERABILITY OF INTERROGATORS AND TAGS MANUFACTURED BY DIFFERENT VENDORS IN A POSTAL ENVIRONMENT |
ISO/IEC 24791-2:2011 | Information technology — Radio frequency identification (RFID) for item management — Software system infrastructure — Part 2: Data management |
ISO/IEC 18047-6:2017 | Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
ISO/IEC 24753:2011 | Information technology — Radio frequency identification (RFID) for item management — Application protocol: encoding and processing rules for sensors and batteries |
ISO/IEC 19762-4:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 4: General terms relating to radio communications |
I.S. EN ISO 21007-2:2015 | GAS CYLINDERS - IDENTIFICATION AND MARKING USING RADIO FREQUENCY IDENTIFICATION TECHNOLOGY - PART 2: NUMBERING SCHEMES FOR RADIO FREQUENCY IDENTIFICATION (ISO 21007-2:2015) |
VDI/AIM 4472 Blatt 10:2008-05 | Requirements to be met by transponder systems for use in the supply chain - Test methods to check the performance of transponder systems (RFID) |
VDI 4489 Blatt 1:2015-06 (Draft) | Labelling of pallets with Auto-ID elements - Returnable wooden pallets of Euro measure (800 mm x 1200 mm) |
VDI 4472 Blatt 5:2008-05 | Requirements to be met by transponder systems for use in the supply chain - Use of transponder systems in returnable transport item logistic |
VDI 4464:2012-05 | Operation of industrial trucks with RFID components |
ISO/IEC/IEEE 21451-7:2011 | Information technology — Smart transducer interface for sensors and actuators — Part 7: Transducer to radio frequency identification (RFID) systems communication protocols and Transducer Electronic Data Sheet (TEDS) formats |
PD ISO/IEC TR 24710:2005 | Information technology. Radio frequency identification for item management. Elementary tag licence plate funtionality for ISO/IEC 18000 air interface definitions |
TR 102 649-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL CHARACTERISTICS OF RFID IN THE UHF BAND; SYSTEM REFERENCE DOCUMENT FOR RADIO FREQUENCY IDENTIFICATION (RFID) EQUIPMENT; PART 1: RFID EQUIPMENT OPERATING IN THE RANGE FROM 865 MHZ TO 868 MHZ |
DIN EN 16571:2014-10 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
PD ISO/IEC/TR 29172:2011 | Information technology. Mobile item identification and management. Reference architecture for Mobile AIDC services |
BS ISO/IEC 29178:2012 | Information technology. Mobile item identification and management. Service broker for Mobile AIDC services |
BS ISO 24535:2007 | Intelligent transport systems. Automatic vehicle identification. Basic electronic registration identification (Basic ERI) |
BS ISO/IEC 24791-2:2011 | Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure Data management |
09/30188761 DC : 0 | BS ISO/IEC 29143 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE TECHNIQUES - AIR INTERFACE SPECIFICATION FOR MOBILE RFID INTERROGATORS |
BS ISO/IEC 19762-4:2008 | Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary General terms relating to radio communications |
BS ISO/IEC 29143:2011 | Information technology. Automatic identification and data capture techniques. Air interface specification for mobile RFID interrogators |
PD CEN/TR 16968:2016 | Electronic Fee Collection. Assessment of security measures for applications using Dedicated Short-Range Communication |
08/30192887 DC : DRAFT NOV 2008 | BS ISO/IEC 24791-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT - SOFTWARE SYSTEM INFRASTRUCTURE - PART 6: SECURITY |
ISO/IEC TR 18001:2004 | Information technology Radio frequency identification for item management Application requirements profiles |
12/30257199 DC : 0 | BS ISO/IEC 18046-3 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 3: TEST METHODS FOR TAG PERFORMANCE |
IEEE 1451.7-2010 | IEEE Standard for Smart Transducer Interface for Sensors and Actuators--Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats |
BS ISO/IEC 24791-5:2012 | Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure Device interface |
BS ISO 29404:2015 | Ships and marine technology. Offshore wind energy. Supply chain information flow |
10/30208405 DC : 0 | |
BS ISO/IEC 19823-10:2017 | Information technology. Conformance test methods for security service crypto suites Crypto suite AES-128 |
12/30257202 DC : 0 | BS ISO/IEC 18047-6 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
BS ISO/IEC 24791-1:2010 | Information technology. Radio frequency identification (RFID) for item management. Software system infrastructure Architecture |
BS EN ISO/IEC 19762-3:2012 | Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary Radio frequency identification (RFID) |
PD ISO/TS 26683-2:2012 | Intelligent transport systems. Freight land conveyance content identification and communication (FLC-CIC) Application interface profiles |
10/30208419 DC : 0 | |
CSA ISO/IEC 18046-2:2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 2: TEST METHODS FOR INTERROGATOR PERFORMANCE |
CSA ISO/IEC 18046-1 : 2013 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE PERFORMANCE TEST METHODS - PART 1: TEST METHODS FOR SYSTEM PERFORMANCE |
ISO/TS 10891:2009 | Freight containers — Radio frequency identification (RFID) — Licence plate tag |
CSA ISO/IEC TR 24729-3:14 (R2019) | Information technology - Radio frequency identification for item management - Implementation guidelines - Part 3: Implementation and operation of UHF RFID Interrogator systems in logistics applications (Adopted ISO/IEC TR 24729-3:2009, first edition, 2009-05-15) |
TS 101 601 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); THE SPECIFICATION AND IMPLEMENTATION OF DESIGN CHANGES TO INTERROGATORS AND SPECIFICATION OF THE TEST PLAN FOR THE PRELIMINARY TESTS AND THE TRIAL; MODIFICATION OF INTERROGATORS AND SPECIFICATION OF TEST PLANS FOR THE PRELIMINARY TESTS AND TRIAL |
ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
TR 102 436 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD) INTENDED FOR OPERATION IN THE BANDS 865 MHZ TO 868 MHZ AND 915 MHZ TO 921 MHZ; GUIDELINES FOR THE INSTALLATION AND COMMISSIONING OF RADIO FREQUENCY IDENTIFICATION (RFID) EQUIPMENT AT UHF |
I.S. EN 16656:2014 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - RFID EMBLEM (ISO/IEC 29160:2012, MODIFIED) |
ISO/IEC 29175:2012 | Information technology Mobile item identification and management User data for Mobile AIDC services |
ISO/IEC 29176:2011 | Information technology Mobile item identification and management Consumer privacy-protection protocol for Mobile RFID services |
PD IEC/TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) Environment. Description and classification of electromagnetic environments |
CEN/TR 16968:2016 | Electronic Fee Collection - Assessment of security measures for applications using Dedicated Short-Range Communication |
ISO/IEC 29160:2012 | Information technology Radio frequency identification for item management RFID Emblem |
TR 102 649-2 : 1.3.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); TECHNICAL CHARACTERISTICS OF SHORT RANGE DEVICES (SRD) AND RFID IN THE UHF BAND; SYSTEM REFERENCE DOCUMENT FOR RADIO FREQUENCY IDENTIFICATION (RFID) AND SRD EQUIPMENT; PART 2: ADDITIONAL SPECTRUM REQUIREMENTS FOR UHF RFID, NON-SPECIFIC SRDS AND SPECIFIC SRDS |
ISO/IEC 29133:2010 | Information technology Automatic identification and data capture techniques Quality test specification for rewritable hybrid media data carriers |
ISO/IEC TR 29172:2011 | Information technology Mobile item identification and management Reference architecture for Mobile AIDC services |
UNI CEI EN ISO/IEC 19762-3 : 2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 3: RADIO FREQUENCY IDENTIFICATION (RFID) |
ISO/IEC 18046-2:2011 | Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance |
ISO/IEC 18046-1:2011 | Information technology — Radio frequency identification device performance test methods — Part 1: Test methods for system performance |
ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
ISO/IEC 29143:2011 | Information technology — Automatic identification and data capture techniques — Air interface specification for Mobile RFID interrogators |
ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
ISO 21007-2:2015 | Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification |
DIN EN 16656:2014-10 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - RFID EMBLEM (ISO/IEC 29160:2012, MODIFIED) |
09/30202766 DC : 0 | BS ISO/IEC 24791-2 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT - SOFTWARE SYSTEM INFRASTRUCTURE - PART 2: DATA MANAGEMENT |
ISO 17264:2009 | Intelligent transport systems — Automatic vehicle and equipment identification — Interfaces |
UNI EN 16571 : 2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
TS 102 903 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); COMPLIANCE TESTS FOR COGNITIVE INTERFERENCE MITIGATION FOR USE BY UHF RFID USING DETECT-AND-AVOID (DAA) OR OTHER SIMILAR TECHNIQUES |
TS 102 902 : 1.2.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); METHODS, PARAMETERS AND TEST PROCEDURES FOR COGNITIVE INTERFERENCE MITIGATION TOWARDS ER-GSM FOR USE BY UHF RFID USING DETECT-AND-AVOID (DAA) OR OTHER SIMILAR TECHNIQUES |
10/30208409 DC : 0 | |
PD CEN/TR 16672:2014 | Information technology. Privacy capability features of current RFID technologies |
12/30267027 DC : 0 | BS ISO 18382 - SPACE DATA AND INFORMATION TRANSFER SYSTEMS - SPACECRAFT ONBOARD INTERFACE SERVICES - RFID-BASED INVENTORY MANAGEMENT SYSTEMS |
16/30314889 DC : 0 | BS ISO 20333 - TRADITIONAL CHINESE MEDICINE - CODING RULES FOR CHINESE MEDICINES IN SUPPLY CHAIN MANAGEMENT |
10/30157037 DC : 0 | BS ISO/IEC 24753 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT - APPLICATION PROTOCOL: ENCODING AND PROCESSING RULES FOR SENSORS AND BATTERIES |
12/30242166 DC : 0 | BS ISO 26683-2 - INTELLIGENT TRANSPORT SYSTEMS - FREIGHT AND CONVEYANCE CONTENT IDENTIFICATION AND COMMUNICATION - PART 2: APPLICATION INTERFACE PROFILES |
ISO 20333:2017 | Traditional Chinese medicine — Coding rules for Chinese medicines in supply chain management |
10/30213756 DC : 0 | BS ISO/IEC/IEEE 21451-7 - INFORMATION TECHNOLOGY - IEEE STANDARD FOR A SMART TRANSDUCER INTERFACE FOR SENSORS AND ACTUATORS - PART 7: TRANSDUCERS TO RADIO FREQUENCY IDENTIFICATION (RFID) SYSTEMS COMMUNICATION PROTOCOLS AND TRANSDUCER ELECTRONIC DATA SHEET FORMATS |
06/30145083 DC : DRAFT JAN 2006 | ISO 17366 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT PACKAGING |
PD CEN/TR 16669:2014 | Information technology. Device interface to support ISO/IEC 18000-3 |
BS ISO/IEC 29160 : 2012 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - RFID EMBLEM |
BS ISO/IEC 15962:2013 | Information technology. Radio frequency identification (RFID) for item management. Data protocol: data encoding rules and logical memory functions |
15/30280965 DC : 0 | BS EN ISO 21007-2 - GAS CYLINDERS - IDENTIFICATION AND MARKING USING RADIO FREQUENCY IDENTIFICATION TECHNOLOGY - PART 2: NUMBERING SCHEMES FOR RADIO FREQUENCY IDENTIFICATION |
CSA ISO/IEC 15963 : 2010 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - UNIQUE IDENTIFICATION FOR RF TAGS |
CSA ISO/IEC 15963 : 2010 : R2015 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - UNIQUE IDENTIFICATION FOR RF TAGS |
I.S. EN 16571:2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
ISO/IEC 19823-10:2017 | Information technology Conformance test methods for security service crypto suites Part 10: Crypto suite AES-128 |
S.R. CEN/TR 16669:2014 | INFORMATION TECHNOLOGY - DEVICE INTERFACE TO SUPPORT ISO/IEC 18000-3 |
UNI EN 16656 : 2014 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - RFID EMBLEM |
I.S. EN ISO/IEC 19762-3:2012 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 3: RADIO FREQUENCY IDENTIFICATION (RFID) (ISO/IEC 19762-3:2008) |
ISO/IEC 15963:2009 | Information technology Radio frequency identification for item management Unique identification for RF tags |
ISO/IEC 29179:2012 | Information technology Mobile item identification and management Mobile AIDC application programming interface |
ISO/IEC 19762-3:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) |
UNE-EN ISO 21007-2:2016 | Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015) |
EN 4817:2012 | Aerospace series - Passive UHF RFID tags intended for aircraft use |
EN ISO 21007-2:2015 | Gas cylinders - Identification and marking using radio frequency identification technology - Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2015) |
EN ISO/IEC 19762-3:2012 | Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 3: Radio frequency identification (RFID) (ISO/IEC 19762-3:2008) |
EN 16656:2014 | Information technology - Radio frequency identification for item management - RFID Emblem (ISO/IEC 29160:2012, modified) |
EN 16571:2014 | Information technology - RFID privacy impact assessment process |
BS ISO/IEC 18046-3:2012 | Information technology. Radio frequency identification device performance test methods Test methods for tag performance |
S.R. CEN/TR 16670:2014 | INFORMATION TECHNOLOGY - RFID THREAT AND VULNERABILITY ANALYSIS |
TR 102 644-2 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RFID PLUGTESTS TO INVESTIGATE THE INTEROPERABILITY OF TAGS MANUFACTURED BY DIFFERENT VENDORS; PART 2: TEST PLAN AND PRELIMINARY TESTS |
ISO/IEC TR 18046:2005 | Information technology Automatic identification and data capture techniques Radio frequency identification device performance test methods |
BS ISO/IEC 15963:2009 | Information technology. Radio frequency identification for item management. Unique identification for RF tags |
10/30208413 DC : 0 | |
UNI EN ISO 17264 : 2010 | INTELLIGENT TRANSPORT SYSTEMS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - INTERFACES |
BS ISO/IEC 24753:2011 | Information technology. Radio frequency identification (RFID) for item management. Application protocol: encoding and processing rules for sensors and batteries |
BS ISO/IEC 18046-1:2011 | Information technology. Radio frequency identification device performance test methods Test methods for system performance |
08/30189740 DC : DRAFT SEP 2008 | BS ISO IEC 24791-1 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT - SOFTWARE SYSTEM INFRASTRUCTURE - PART 1: ARCHITECTURE |
18/30357579 DC : 0 | BS ISO/IEC 19823-19 - INFORMATION TECHNOLOGY - CONFORMANCE TEST METHODS FOR SECURITY SERVICE CRYPTO SUITES - PART 19: CRYPTO SUITE RAMON |
CSA ISO/IEC TR 24710:14 (R2019) | Information technology - Radio frequency identification for item management - Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions (Adopted ISO/IEC TR 24710:2005, first edition, 2005-10-15) |
BS ISO/IEC 18046:2006 | Information technology. Automatic identification and data capture techniques. Radio frequency identification device performance test methods |
CAN/CSA-ISO/IEC 18000-3:12 (R2016) | Information technology - Radio frequency identification for item management - Part 3: Parameters for air interface communications at 13,56 MHz (Adopted ISO/IEC 18000-3:2010, third edition, 2010-11-15) |
17/30322567 DC : 0 | BS ISO/IEC 19823-13 - INFORMATION TECHNOLOGY - CONFORMANCE TEST METHODS FOR SECURITY SERVICE CRYPTO SUITES - PART 13: CRYPTOGRAPHIC SUITE GRAIN-128A |
09/30189744 DC : 0 | ISO/IEC 24791-5 - INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION (RFID) FOR ITEM MANAGEMENT - SOFTWARE SYSTEM INFRASTRUCTURE - PART 5: DEVICE INTERFACE |
DIN EN 16571 E : 2014 | INFORMATION TECHNOLOGY - RFID PRIVACY IMPACT ASSESSMENT PROCESS |
NF EN ISO 17264 : 2010 | INTELLIGENT TRANSPORT SYSTEMS - AUTOMATIC VEHICLE AND EQUIPMENT IDENTIFICATION - INTERFACES |
11/30216814 DC : 0 | BS ISO 17364 - SUPPLY CHAIN APPLICATIONS OF RFID - RETURNABLE TRANSPORT ITEMS (RTIS) |
07/30146575 DC : 0 | ISO/IEC 19762-3 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 3: RADIO-FREQUENCY IDENTIFICATION (RFID) |
CEN/TR 16672:2014 | Information technology - Privacy capability features of current RFID technologies |
HIBC-4 : 2009 | RFID HIBC FOR PRODUCT IDENTIFICATION |
CSA ISO/IEC 19762-3 : 2009 | INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 3: RADIO FREQUENCY IDENTIFICATION (RFID) |
CSA ISO/IEC TR 18047-6 : 2013 : R2017 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION DEVICE CONFORMANCE TEST METHODS - PART 6: TEST METHODS FOR AIR INTERFACE COMMUNICATIONS AT 860 MHZ TO 960 MHZ |
TS 102 562 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPROVED SPECTRUM EFFICIENCY FOR RFID IN THE UHF BAND |
TR 102 644-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RFID PLUGTESTS TO INVESTIGATE THE INTEROPERABILITY OF TAGS MANUFACTURED BY DIFFERENT VENDORS; PART 1: RFID PLUGTESTS REPORT |
ISO/IEC 15961-1:2013 | Information technology Radio frequency identification (RFID) for item management: Data protocol Part 1: Application interface |
S.R. CEN/TR 16968:2016 | ELECTRONIC FEE COLLECTION - ASSESSMENT OF SECURITY MEASURES FOR APPLICATIONS USING DEDICATED SHORT-RANGE COMMUNICATION |
ISO 29404:2015 | Ships and marine technology — Offshore wind energy — Supply chain information flow |
ISO/IEC 18046:2006 | Information technology Automatic identification and data capture techniques Radio frequency identification device performance test methods |
ISO 18382:2013 | Space data and information transfer systems — Spacecraft onboard interface services — RFID-based inventory management systems |
ISO/IEC TR 24710:2005 | Information technology Radio frequency identification for item management Elementary tag licence plate functionality for ISO/IEC 18000 air interface definitions |
CSA ISO/IEC 29133:14 (R2019) | Information technology - Automatic identification and data capture techniques - Quality test specification for rewritable hybrid media data carriers (Adopted ISO/IEC 29133:2010, first edition, 2010-05-15) |
S.R. CEN/TR 16672:2014 | INFORMATION TECHNOLOGY - PRIVACY CAPABILITY FEATURES OF CURRENT RFID TECHNOLOGIES |
ISO/IEC 29167-1:2014 | Information technology Automatic identification and data capture techniques Part 1: Security services for RFID air interfaces |
ISO/IEC TR 24729-1:2008 | Information technology Radio frequency identification for item management Implementation guidelines Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C |
ISO/IEC 24791-1:2010 | Information technology — Radio frequency identification (RFID) for item management — Software system infrastructure — Part 1: Architecture |
ISO/TS 26683-2:2012 | Intelligent transport systems Freight land conveyance content identification and communication (FLC-CIC) Part 2: Application interface profiles |
IEC TR 61000-2-5:2017 | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
ISO 24535:2007 | Intelligent transport systems — Automatic vehicle identification — Basic electronic registration identification (Basic ERI) |
IEC TR 61000-2-5:2017 RLV | Electromagnetic compatibility (EMC) - Part 2-5: Environment - Description and classification of electromagnetic environments |
BS EN ISO 21007-2:2015 | Gas cylinders. Identification and marking using radio frequency identification technology Numbering schemes for radio frequency identification |
AAMVA DL/ID CDS : 2016 | PERSONAL IDENTIFICATION - AAMVA NORTH AMERICAN STANDARD - DL/ID CARD DESIGN |
SA TR IEC 61000.2.5:2019 | Electromagnetic compatibility (EMC) Environment - Description and classification of electromagnetic environments |
ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
ISO/IEC 18000-61:2012 | Information technology — Radio frequency identification for item management — Part 61: Parameters for air interface communications at 860 MHz to 960 MHz Type A |
ISO/IEC 29143:2011 | Information technology — Automatic identification and data capture techniques — Air interface specification for Mobile RFID interrogators |
ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
ISO/IEC 18000-4:2015 | Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz |
ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
ISO/IEC 18000-62:2012 | Information technology — Radio frequency identification for item management — Part 62: Parameters for air interface communications at 860 MHz to 960 MHz Type B |
ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
ISO/IEC 18000-64:2012 | Information technology — Radio frequency identification for item management — Part 64: Parameters for air interface communications at 860 MHz to 960 MHz Type D |
ISO/IEC 18000-63:2015 | Information technology Radio frequency identification for item management Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C |
EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.