ISO/IEC 7811-7:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Identification cards Recording technique Part 7: Magnetic stripe High coercivity, high density
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
15-07-2021
English
25-08-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/IEC 7811-7:2014 is one of a series of International Standards describing the characteristics for identification cards as defined in the definitions clause and the use of such cards for international interchange.
It specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card and encoding technique. It takes into consideration both human and machine aspects and states minimum requirements.
Coercivity influences many of the quantities specified in ISO/IEC 7811-7:2014 but is not itself specified. The main characteristic of the high coercivity magnetic stripe is its improved resistance to erasure. This is achieved with minimal probability of damage to other magnetic stripes by contact while retaining read compatibility with magnetic stripes as defined in ISO/IEC 78112.
ISO/IEC 7811-7:2014 provides for a card capacity of approximately 10 times that of a card conforming to ISO/IEC 78116. The number of tracks has been increased to six, each track being approximately half the width of tracks conforming to ISO/IEC 78116, located so that readers designed to read these high density tracks will also be able to read cards conforming to ISO/IEC 78112 and ISO/IEC 78116. Data is encoded in 8 bit bytes using the MFM encoding technique. Data framing is used to limit error propagation and error correction techniques further improve reliability of reading.
It is the purpose of this series of International Standards to provide criteria to which cards shall perform. No consideration is given within these International Standards to the amount of use, if any, experienced by the card prior to test. Failure to conform to specified criteria should be negotiated between the involved parties.
ISO/IEC 103732 specifies the test procedures used to check cards against the parameters specified in ISO/IEC 7811-7:2014.
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| CSA ISO/IEC 7811-7 : 2015 | Identical |
| NEN ISO/IEC 7811-7 : 2014 | Identical |
| BS ISO/IEC 7811-7:2014 | Identical |
| INCITS/ISO/IEC 7811-7 : 2014 | Identical |
| GOST R ISO/IEC 7811-7 : 2010 | Identical |
| BIS IS 14147-7 : 2013(R2016) | Identical |
| NS ISO/IEC 7811-7 : 1ED 2005 | Identical |
| BS ISO 20302:2014 | Health informatics. Health cards. Numbering system and registration procedure for issuer identifiers |
| 07/30162877 DC : 0 | BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| ISO/IEC 18328-2:2015 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices |
| ISO 20302:2014 | Health informatics Health cards Numbering system and registration procedure for issuer identifiers |
| UNI CEI ISO/IEC 11693-2 : 2010 | IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| 17/30359941 DC : 0 | BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| CAN/CSA-ISO/IEC 10373-2:16 | Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15) |
| CAN/CSA-ISO/IEC 18328-2:16 | Identification cards ICC-managed devices Part 2: Physical characteristics and test methods for cards with devices (Adopted ISO/IEC 18328-2:2015, first edition, 2015-11-01) |
| 13/30269784 DC : 0 | BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| ISO/IEC 11693-2:2009 | Identification cards Optical memory cards Part 2: Co-existence of optical memory with other machine readable technologies |
| 09/30213280 DC : 0 | BS ISO/IEC 7816-1 - IDENTIFICATION CARDS - INTEGRATED CARDS - CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
| BS ISO/IEC 18328-2:2015 | Identification cards. ICC-managed devices Physical characteristics and test methods for cards with devices |
| BS ISO/IEC 10373-2:2015 | Identification cards. Test methods Cards with magnetic stripes |
| BS ISO/IEC 7816-1:2011 | Identification cards. Integrated circuit cards Cards with contacts. Physical characteristics |
| BS ISO/IEC 11693-2:2009 | Identification cards. Optical memory cards Co-existence of optical memory with other machine readable technology |
| ISO/IEC 7816-1:2011 | Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics |
| 05/30084397 DC : DRAFT MAY 2005 | ISO 20302 - HEALTH INFORMATICS - HEALTH CARDS - NUMBERING SYSTEM AND REGISTRATION PROCEDURE FOR ISSUER IDENTIFIERS |
| 05/30127945 DC : DRAFT JAN 2005 | ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| CEI UNI ISO/IEC 11693-2 : 2010 | IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| INCITS/ISO/IEC 7816-1 : 2014 | IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS |
| 08/30175732 DC : DRAFT MAY 2008 | BS ISO/IEC 11693-2 - IDENTIFICATION CARDS - OPTICAL MEMORY CARDS - PART 2: CO-EXISTENCE OF OPTICAL MEMORY WITH OTHER MACHINE READABLE TECHNOLOGIES |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
| AAMVA DL/ID CDS : 2016 | PERSONAL IDENTIFICATION - AAMVA NORTH AMERICAN STANDARD - DL/ID CARD DESIGN |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO/IEC 7811-6:2014 | Identification cards Recording technique Part 6: Magnetic stripe High coercivity |
| ISO/IEC 7810:2003 | Identification cards Physical characteristics |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.