JIS C 5260-1:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Potentiometers for use in electronic equipment Part 1: Generic specification
Hardcopy , PDF
23-12-2016
English, Japanese
15-02-2008
This Japanese Industrial Standard specifies the potentiometers for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications for qualification approval and quality assessment systems. This specification describes on single turn rotary potentiometer with a control spindle, and the terms shall mean as follows for other types of potentiometers: (1) The angle of rotation may be number of turns. (2) The control spindle shall mean any other actuating device. (3) The angle of rotation shall be within the range of mechanical travel of the actuating device in the case of driving mechanism. (4) In the case of a linear actuating mechanism, the operating torque shall be operating force. These alternative prescriptions shall be found in the sectional or detail specification. For 2-terminal potentiometer, the modified part of the standard tests in this specification shall be prescribed in the relevant standard.
DocumentType |
Standard
|
Pages |
113
|
PublisherName |
Japanese Standards Association
|
Status |
Superseded
|
SupersededBy |
JIS Z 9015:1980 | Sampling Inspection Procedures And Tables By Attributes With Severity Adjustment (receiving Inspection Where A Consumer Can Select Suppliers) |
JIS C 60068-2-17:2001 | Basic environmental testing procedures -- Part 2: Tests -- Test Q: Sealing Part 2: Tests - Test Q: Sealing |
JIS C 6484:2005 | Base materials for printed circuits - Epoxide woven E-glass laminated sheets of defined flammability (vertical burning test) |
JIS Z 8401:1999 | Guide to the rounding of numbers |
JIS C 60068-2-45:1995 | Environmental testing procedures of electronic and electrical resistance to solvents (immersion in cleaning solvents) |
JIS C 5062:2008 | Marking codes for resistors and capacitors |
JIS C 60068-2-20:1996 | Basic environmental testing procedures Part 2: Tests. Test T: Soldering |
JIS C 0301:1990 | Graphic Symbols For Electrical Apparatus |
JIS C 60068-2-21:2002 | Environmental testing Part 2-21: Tests - Test U: Robustness of termination and integral mounting devices |
JIS C 5063:1997 | Preferred number series for resistors and capacitors |
JIS C 60068-2-13:1989 | This Japanese Industrial Standard specifies the low pressure tests performed at room temperature. Part 2: Tests, Test M: Low air pressure |
JIS Z 8601:1954 | Preferred numbers |
JIS C 60068-1:1993 | Environmental testing Part 1: General and guidance |
JIS C 5260-4-2:2000 | Potentiometers For Use In Electronic Equipment - Part 4: Blank Detail Specification: Single-turn Rotary Power Potentiometers Assessment Level F |
JIS C 5260-5-2:2000 | Potentiometers For Use In Electronic Equipment - Part 5: Blank Detail Specification: Single-turn Rotary Low-power Potentiometers Assessment Level F |
JIS C 5260-2-1:2000 | Potentiometers For Use In Electronic Equipment - Part 2 - Blank Detail Specification: Lead-screw Actuated And Rotary Preset Potentiometers Assessment Level E |
JIS C 5260-5-1:2000 | Potentiometers For Use In Electronic Equipment - Part 5: Blank Detail Specification: Single-turn Rotary Low-power Potentiometers Assessment Level E |
JIS C 5260-2-2:2000 | Potentiometers For Use In Electronic Equipment - Part 2 - Blank Detail Specification: Lead-screw Actuated And Rotary Preset Potentiometers Assessment Level F |
JIS C 5260-4-1:2000 | Potentiometers For Use In Electronic Equipment - Part 4: Blank Detail Specification: Single-turn Rotary Power Potentiometers Assessment Level E |
JIS C 5260-5:2000 | Potentiometers For Use In Electronic Equipment - Part 5: Sectional Specification: Single-turn Rotary Low-power Wirewound Potentiometers |
JIS C 5260-2:2000 | Potentiometers For Use In Electronic Equipment - Part 2 - Sectional Specification: Lead-screw Actuated And Rotary Preset Potentiometers |
JIS C 5260-4:2000 | Potentiometers For Use In Electronic Equipment - Part 4: Sectional Specification: Single-turn Rotary Power Potentiometers |
JIS C 5260-3-1:2000 | Potentiometers For Use In Electronic Equipment - Part 3 - Blank Detail Specification: Rotary Precision Potentiometers Assessment Level E |
JIS C 5260-3:2000 | Potentiometers For Use In Electronic Equipment - Part 3 - Sectional Specification: Rotary Precision Potentiometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.