MIL-DTL-16356 Revision E:2013
Current
Current
The latest, up-to-date edition.
GAUGES, DIRECT READING, OBLONG GLASS
Available format(s)
PDF
Language(s)
English
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies direct reading sight indicators and gauges that use oblong glass panes of the reflex or plain transparent type, including replacement glass and gasket sets.
| Committee |
FSC 6680
|
| DevelopmentNote |
Supersedes MIL G 16356 (D). (09/2013)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-24777 Revision A:1998 | NON-METALLIC MATERIALS WITH SPECIAL REQUIREMENTS |
| ASTM F 218 : 2013 : REDLINE | Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
| MIL-DTL-16232 Revision G:2000 | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
| MIL-G-24716 Revision A:1993 | GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND |
| MIL-DTL-22050 Revision E:2004 | Gasket and Packing Material, Rubber, for use with Polar Fluids, Steam, and Air at Moderately High Temperatures |
| DIN 7081:1999-05 | PRESSURE RESISTANT OBLONG SIGHT GLASSES OF BOROSILICATE GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| MIL-STD-792 Revision F:2006 | IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS |
| MIL-STD-2035 Revision A:1995 | NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA |
| MIL-R-17131 Revision C:1981 | RODS AND POWDERS, WELDING, SURFACING |
| MIL-P-24503 Revision B:1991 | PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
| SAE AMS 2750 : 2012 | PYROMETRY |
| SAE AMS 2371 : 2016 | QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| MIL P 24583 : B | PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| ASTM A 217/A217M : 2014 : REDLINE | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| MIL-STD-767 Revision E:1997 | Control of Hardware Cleanliness |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASTM F 104 : 2011 : REDLINE | Standard Classification System for Nonmetallic Gasket Materials |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| FF-S-92 Revision C:2014 | SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD |
| MIL-PRF-6855 Revision F:2009 | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-22 Revision D:1979 | WELDED JOINT DESIGN |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| MIL-DTL-25988 Revision C:2006 | RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
| MIL-S-24093 Revision A:1991 | STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| MIL-DTL-24696 Revision C:2008 | GASKET, SHEET, NON-ASBESTOS |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.