MIL-DTL-24299 Revision B:2017
Current
The latest, up-to-date edition.
Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard
English
17-10-2017
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies naval shipboard heaters that are stationary, self-contained, and electrically operated, which are controlled and monitored by an external supervisory network or a human watchstander.
| DevelopmentNote |
Supersedes MIL H 24299 (A). (10/2017)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers naval shipboard heaters that are stationary, self-contained, and electrically operated, which are controlled and monitored by an external supervisory network or a human watchstander. The heaters are used to heat lubricating oil or fuel for purification or warm-up.
| QQ-N-286 Revision G:2000 | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL-DTL-5624 Revision W:2016 | Turbine Fuel, Aviation, Grades JP-5 (NATO F-44) |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL-DTL-2212 Revision K:2014 | Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| ASTM A 204/A204M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
| MIL-G-24716 Revision A:1993 | Gaskets, Metallic-Flexible Graphite, Spiral Wound |
| SAE AMS3216G | Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| MIL-PRF-17331 Revision K:2013 | Lubricating Oil, Steam Turbine and Gear, Moderate Service |
| MIL-DTL-1222 Revision J:2000 | Studs, Bolts, Screws and Nuts for Applications where a High Degree of Reliability is Required; General Specification for |
| MIL-P-24691-1 Base Document:1987 | Pipe And Tube, Carbon Steel, Seamless |
| MS18229 Revision C:2017 | Plug for O-Ring Gasket |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-DTL-16884 Revision P:2017 | Fuel, Naval Distillate |
| MIL-T-24388 Revision C:1990 | Thermocouple and Resistance Temperature Detector Assemblies, General Specification for (Naval Shipboard) |
| SAE J1926/1_201609 | Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing |
| MIL-PRF-9000 Revision L:2014 | Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL H 22577 : C | HEATING ELEMENTS, ELECTRICAL, CARTRIDGE, SHIP AND TUBULAR TYPE |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-HDBK-217 Revision F:1991 | Reliability Prediction of Electronic Equipment |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| SAE AMS3218C | Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
| MIL-STD-1399-300 Revision B:2008 | Department of Defense Interface Standard Section 300B Electric Power, Alternating Current (S/S By MIL-STD-1399-300-1) |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASTM F 2329/F2329M : 2015 : REDLINE | Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners |
| MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-DTL-2036 Revision E:2014 | Enclosures for Electric and Electronic Equipment, Naval Shipboard |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-PRF-1149 Revision D:1998 | Gasket Materials, Synthetic Rubber, 50 and 65 Durometer Hardness |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| MIL-DTL-15090 Revision E:2010 | Enamel, Equipment, Light Gray (Navy Formula No.111) |
| MIL-PRF-20042 Revision F:2015 | Flanges, Pipe, Bronze (Silver Brazing) |
| MIL-C-15726 Revision F:1988 | Copper-Nickel Alloy, Sheet, Plate, Strip, Bar, Rod and Wire |
| MIL-STD-167-1 Revision A:2005 | Mechanical Vibrations of Shipboard Equipment (Type I - Environmental and Type II - Internally Excited) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.