MIL-HDBK-217 Revision F:1991
Current
The latest, up-to-date edition.
RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT
Section 1: Scope
1.1 Purpose
1.2 Application
1.3 Computerized reliability prediction
Section 2: Reference documents
Section 3: Introduction
3.1 Reliability engineering
3.2 The role of reliability prediction
3.3 Limitations of reliability predictions
3.4 Part stress analysis prediction
Section 4: Reliability analysis evaluation
Section 5: Microcircuits, introduction
5.1 Gate/logic arrays and microprocessors
5.2 Memories
5.3 VHSIC/VHSIC like
5.4 GaAs MMIC and digital devices
5.5 Hybrids
5.6 SAW devices
5.7 Magnetic bubble memories
5.8 Pi T table for all
5.9 C2 table for all
5.10 Pi E, pi L and pi Q tables for all
5.11 TJ determination, (all except hybrids)
5.12 TJ determination, (for hybrids)
5.13 Examples
Section 6: Discrete semiconductors
6.0 Discrete semiconductors, introduction
6.1 Diodes, low frequency
6.2 Diodes, high frequency (microwave, RF)
6.3 Transistors, low frequency, bipolar
6.4 Transistors, low frequency, Si FET
6.5 Transistors, unijunction
6.6 Transistors, low noise, high frequency, bipolar
6.7 Transistors, high power, high frequency, bipolar
6.8 Transistors, high frequency, GaAs FET
6.9 Transistors, high frequency, Si FET
6.10 Thyristors and SCRs
6.11 Optoelectronics, detectors, isolators, emitters
6.12 Optoelectronics, alphanumeric displays
6.13 Optoelectronics, laser diode
6.14 TJ determination
6.15 Example
Section 7: Tubes
7.1 All types except TWT and magnetron
7.2 Traveling wave
7.3 Magnetron
Section 8: Lasers
8.0 Introduction
8.1 Helium and argon
8.2 Carbon dioxide, sealed
8.3 Carbon dioxide, flowing
8.4 Solid state, ND:YAG and Ruby Rod
Section 9: Resistors
9.0 Introduction
9.1 Fixed, composition (RCR, RC)
9.2 Fixed, film (RLR, RL, RN, (R,C, or N), RN)
9.3 Fixed, film, power (RD)
9.4 Network, fixed, film (RZ)
9.5 Fixed, wirewound (RBR, RB)
9.6 Fixed, wirewound, power (RWR, RW)
9.7 Fixed, wirewound, power, chassis mounted (RER,
RE)
9.8 Thermistor (RTH)
9.9 Variable, wirewound (RTR, RT)
9.10 Variable, wirewound, precision (RR)
9.11 Variable, wirewound, semiprecision (RA, RK)
9.12 Variable, wirewound, power (RP)
9.13 Variable, nonwirewound (RJ, RJR)
9.14 Variable, composition (RV)
9.15 Variable, nonwirewound, film and precision (RQ,
RVC)
9.16 Calculation of stress ratio for potentiometers
9.17 Example
Section 10: Capacitors
10.1 Fixed, paper, by-pass (CP, CA)
10.2 Fixed, feed-through (CZR, CZ)
10.3 Fixed, paper and plastic film (CPV, CQR and CQ)
10.4 Fixed, metallized paper, paper-plastic and
plastic (CH, CHR)
10.5 Fixed, plastic and metallized plastic
10.6 Fixed, super-metallized plastic (CRH)
10.7 Fixed, MICA (CM, CMR)
10.8 Fixed, MICA, button (CB)
10.9 Fixed, glass (CY, CYR)
10.10 Fixed, ceramic, general purpose (CK, CKR)
10.11 Fixed, ceramic, temperature compensating and chip
(CCR and CC, CDR)
10.12 Fixed, electrolytic, tantalum, solid (CSR)
10.13 Fixed, electrolytic, tantalum, non-solid (CL,CLR)
10.14 Fixed, electrolytic, aluminium (CUR and CU)
10.15 Fixed, electrolytic (dry), aluminium (CE)
10.16 Variable, ceramic (CV)
10.17 Variable, piston type (PC)
10.18 Variable, air trimmer (CT)
10.19 Variable and fixed, gas or vacuum (CG)
10.20 Example
Section 11: Inductive devices
11.1 Transformers
11.2 Coils
11.3 Determination of hot spot temperature
Section 12: Rotating devices
12.1 Motors
12.2 Synchros and resolvers
12.3 Elapsed time meters
12.4 Example
Section 13: Relays
13.1 Mechanical
13.2 Solid state and time delay
Section 14: Switches
14.1 Toggle or pushbutton
14.2 Basic sensitive
14.3 Rotary
14.4 Thumbwheel
14.5 Circuit breakers
Section 15: Connectors
15.1 General (except printed circuit board)
15.2 Printed circuit board
15.3 Integrated circuit sockets
Section 16: Interconnection assemblies
16.1 Interconnection assemblies with plated through
holes
Section 17: Connections
17.1 Connections
Section 18: Meters
18.1 Meters, panel
Section 19: Quartz crystals
19.1 Quartz crystals
Section 20: Lamps
20.1 Lamps
Section 21: Electronic filters
21.1 Electronic filters, non-tunable
Section 22: Fuses
22.1 Fuses
Section 23: Miscellaneous parts
23.1 Miscellaneous parts
Appendix A: Parts count reliability prediction
Appendix B: VHSIC/VHSIC-like and VLSI CMOS (detailed
model
Appendix C: Bibliography
Tables
3-1 Parts with multi-level quality specifications
3-2 Environmental symbol and description
4-1 Reliability analysis checklist
6-1 Default case temperatures for all environments
(deg C)
6-2 Approximate thermal resistance for semiconductor
devices in various package sizes
Figures
5-1 Cross sectional view of a hybrid with a single
multi-layered substrate
8-1 Examples of active optical surfaces
9-1 MIL-R-39008 derating curve
Establishes uniform methods for predicting the reliability of military electronic equipment and systems. It gives a common basis for reliability predictions during acquisition programmes and in the evaluation of related or competitive design. Part Stress Analysis and Parts Count are the 2 methods used. Coverage includes reliability analysis evaluation, discrete semiconductors and rotating devices.
DevelopmentNote |
New child NOT 1 2022 is added
|
DocumentType |
Standard
|
Pages |
323
|
ProductNote |
New child NOT 1 2022 is added
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
MIL-M-28787-347 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC CLOCK, MICROPROCESSOR MODULE, KEY CODE TRU |
FAA AC 33.28-1 : 0 | COMPLIANCE CRITERIA FOR 14 CFR SECTION 33.28, AIRCRAFT ENGINES, ELECTRICAL AND ELECTRONIC ENGINE CONTROL SYSTEMS |
MIL-M-28787-360 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER, DATA MODULE, KEY CODE DFH |
MIL-C-28779 Revision B:1972 | COMBINER, EXTENDED FREQUENCY RANGE CU-2OO7 (/SRR) |
MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR |
BS EN 61514-2:2013 | Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
DEFSTAN 00-13/3(1994) : 1994 | REQUIREMENTS FOR THE ACHIEVEMENT OF TESTABILITY IN ELECTRONIC AND ALLIED EQUIPMENT |
MIL-F-24291 Revision C:1990 | FLOWMETER, FLUID ELECTROMAGNETIC TYPE |
SAE AS 5506/1 : 2015 | SAE ARCHITECTURE ANALYSIS AND DESIGN LANGUAGE (AADL) ANNEX VOLUME 1: ANNEX A: ARINC653 ANNEX, ANNEX C: CODE GENERATION ANNEX, ANNEX E: ERROR MODEL ANNEX |
SAE ARP 1798 : 2012 | PORTABLE EMERGENCY LIGHTING SYSTEMS FOR FLIGHT CREW MEMBERS |
MIL-HDBK-59 Revision B:1994 | COMPUTER AIDED ACQUISITION AND LOGISTIC SUPPORT (CALS) PROGRAM IMPLEMENTATION GUIDE |
MIL-A-83577 Revision B:1988 | ASSEMBLIES, MOVING MECHANICAL, FOR SPACE AND LAUNCH VEHICLES, GENERAL SPECIFICATION FOR |
ISO/TR 19972-1:2009 | Hydraulic fluid power Methods to assess the reliability of hydraulic components Part 1: General procedures and calculation method |
MIL-STD-1629 Revision A:1980 | PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS |
MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
BS EN 61204:1995 | Low-voltage power supply devices, d.c. output. Performance characteristics and safety requirements |
MIL-R-2729 Revision D:1992 | REGULATOR EXCITER SYSTEMS, VOLTAGE, A.C. GENERATOR, NAVAL SHIPBOARD USE |
XP PREN 3567-004 : 1993 XP | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 004: DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD |
BS EN 16590-2:2014 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
MIL-STD-690 Revision D:2005 | Failure Rate (FR) Sampling Plans and Procedures |
MIL-PRF-71185 Revision A:2013 | Dynamic Reference Unit-Hybrid-Replacement (DRU-H-R) |
MIL-STD-2218 Base Document:1992 | THERMAL DESIGN, ANALYSIS & TEST PROCEDURES FOR AIRBORNE ELECTRONIC EQUIPMENT |
MIL-M-28787-363 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER/TIMING MODULE KEY CODE CEM |
MIL-STD-756 Revision B:1981 | RELIABILITY MODELING AND PREDICTION |
MIL P 24765 : 0 | POWER SUPPLY, UNINTERRUPTIBLE, STATIC |
MIL-A-85055 Base Document:1979 | Avionics System Performance Specification for A-4M/AV-8 Bombing Set, Angle Rate AN/ASB-19(V) |
NASA SP 580 : 2011 | NASA SYSTEM SAFETY HANDBOOK - VOLUME 1, SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR SYSTEM SAFETY FRAMEWORK AND CONCEPTS FOR IMPLEMENTATION |
MIL-M-28787-362 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC DRIVER/RECEIVER DIFFERENTIAL MODULE, KEY CODE HJN |
MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
UTEC 96 029-1 : 2011 | GROUP OF ELECTRONIC EQUIPMENT OBSOLESCENCE - A METHODOLOGICAL GUIDE SIZING INVENTORY END OF LIFE COMPONENTS AND ELECTRONIC SUBASSEMBLIES |
GEIA STD 0008 : 2011 | DERATING OF ELECTRONIC COMPONENTS |
MIL-STD-1556 Revision B:1986 | GOVERNMENT/INDUSTRY DATA EXCHANGE PROGRAM CONTRACTOR PARTICIPATION REQUIREMENTS |
DEFSTAN 02-45/2(2000) : 2000 | REQUIREMENTS FOR THE APPLICATION OF RELIABILITY-CENTRED MAINTENANCE TECHNIQUES TO HM SHIPS, SUBMARINES, ROYAL FLEET AUXILIARIES AND OTHER NAVAL AUXILIARY VESSELS |
MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
BS EN 16602-30-09:2014 | Space product assurance. Availability analysis |
PD ISO/TR 19972-1:2009 | Hydraulic fluid power. Methods to assess the reliability of hydraulic components General procedures and calculation method |
MIL-HDBK-470 Revision A:1997 | Designing and Developing Maintainable Products and Systems, Volume I |
MIL-F-24638 Base Document:1984 | FREQUENCY CHANGER, SOLID STATE, AIR COOLED (NAVAL SHIPBOARD) |
MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
HRD 4 : 87 AMD 1 | HANDBOOK OF RELIABILITY DATA FOR COMPONENTS USED IN TELECOMMUNICATIONS SYSTEMS |
CEI CLC/TR 50506-1 : 2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE |
MIL STD 2080 : 0 | MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT |
MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
MIL-M-28787-361 Base Document:1991 | MODULES, STANDARD ELECTRONIC DYNAMIC RANDOM ACCESS MEMORY MODULE, KEY CODE CJK |
UNI EN 16590-2 : 2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
PREN 16590-2 : DRAFT 2013 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED) |
TR 332 : ISSUE 6 | RELIABILITY PREDICTION PROCEDURE FOR ELECTRONIC EQUIPMENT |
MIL-R-85669 Base Document:1988 | REPEATER SET, RADIO, POD AN/ARQ-49 |
SAE AIR 6006 : 2009 | MODELING AND SIMULATION CAPABILITIES FOR AEROSPACE WDM LAN APPLICATIONS |
IEC TS 62239-2:2017 | Process management for avionics - Management plan - Part 2: Preparation and maintenance of an electronic COTS assembly management plan |
PREN 3567-004 : 200P1 | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD |
ISO 20188:2018 | Space systems — Product assurance requirements for commercial satellites |
ARINC 655 : 1999 | REMOTE DATA CONCENTRATOR (RDC) GENERIC DESCRIPTION |
SAE AS 8054 : 1996 | AIRBORNE ENGINE VIBRATION MONITORING (EVM) SYSTEM, GUIDELINES FOR PERFORMANCE STANDARD FOR |
SAE ARP 5120 : 2016 | AIRCRAFT GAS TURBINE ENGINE HEALTH MANAGEMENT SYSTEM DEVELOPMENT AND INTEGRATION GUIDE |
ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
I.S. EN 16590-2:2014 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE (ISO 25119-2:2010 MODIFIED) |
IEEE 1505.1-2008 | IEEE Standard for the Common Test Interface Pin Map Configuration for High-Density, Single-Tier Electronics Test Requirements Utilizing IEEE Std 1505 |
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
PD IEC/TS 62861:2017 | Guidelines for principal component reliability testing for LED light sources and LED luminaires |
BS EN 14044:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods |
IEC 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
I.S. EN 14043:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
EN 60825-2:2004/A2:2010 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013) |
EN 62308 : 2006 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
CLC/TR 50506-2 : 2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
MIL-E-29581 Base Document:1991 | EARCUP, UNIT ACTIVE NOISE REDUCTION SYSTEM |
MIL-M-28787-336 Revision A:1991 | MODULE, STANDARD ELECTRONIC INTERFACE, MICROPROCESSOR MODULE, KEY CODE NBQ |
MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
IEEE DRAFT 1505 : 0 | RECEIVER FIXTURE INTERFACE SPONSORED BY THE CONNECTORS TECHNICAL COMMITTEE TC-55 OF THE IEEE INSTRUMENTATION & MEASUREMENT SOCIETY |
DIN EN 16590-2:2014-11 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
IEC PAS 62647-3:2011 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
MIL-S-24187 Revision E:1991 | SWITCH ASSEMBLIES, LINEAR MOVEMENT, MANUAL AND REMOTE OPERATION, GENERAL SPECIFICATION FOR |
EIA CMB 6-1 : 2014 STABILIZED | CONFIGURATION AND DATA MANAGEMENT REFERENCES |
MIL-HDBK-2067 Base Document:1999 | AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR |
MIL-DTL-16377 Revision J:2014 | Fixtures, Lighting; and Associated Parts; Shipboard Use, General Specification for |
BS EN 61508-6:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
PD CLC/TR 50506-2:2009 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Safety assurance |
MIL-G-21410 Revision A:1991 | GOVERNING SYSTEMS, SPEED AND LOAD-SENSING NAVAL SHIPBOARD USE |
MIL-C-0024196 Revision B:1991 | CLEANING SYSTEMS, ULTRASONIC |
MIL-C-24196 Revision A:1988 | CLEANING SYSTEM, ULTRASONIC |
BS EN 61069-5:2016 | Industrial-process measurement, control and automation. Evaluation of system properties for the purpose of system assessment Assessment of system dependability |
BS 5760-5:1991 | Reliability of systems, equipment and components Guide to failure modes, effects and criticality analysis (FMEA and FMECA) |
IEEE 1413.1 : 2002 | SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413 |
VDE 0661 : 1988 | PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA |
MIL-T-29402 Base Document:1982 | TEST SET TS 3354/PRC 68 |
MIL-F-24713 Base Document:1989 | FREQUENCY CHANGER, STATIC, AIR COOLED (NAVAL SHIPBOARD) |
MIL-A-22523 Revision E:1968 | ANALYZER-INDICATOR, DEAD RECKONING (DRAI) (NAVAL SHIPBOARD) |
MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
BS EN 62308:2006 | Equipment reliability. Reliability assessment methods |
SAE AS 5625 : 2014 | MINIMUM PERFORMANCE STANDARDS FOR STATIC ELECTRIC POWER FREQUENCY CONVERTERS |
MIL-E-11991 Revision E:1983 | ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR |
MIL-R-24061 Revision B:1972 | RADIAC SET, AN/PDR-27 |
MIL-S-24771 Base Document:1992 | SENSOR, LEVEL, FLOAT TYPE, SHIPBOARD SEWAGE SYSTEMS |
SAE ARP 5584 : 2011 | DOCUMENT FOR ELECTRIC POWER MANAGEMENT |
PREN 3567-001 : 200P1 | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - TECHNICAL SPECIFICATION |
CSA 6.19-17 | Residential carbon monoxide alarming devices |
SAE ARP 5890 : 2011 | GUIDELINES FOR PREPARING RELIABILITY ASSESSMENT PLANS FOR ELECTRONIC ENGINE CONTROLS |
AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
I.S. EN 60825-2:2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
I.S. EN ISO 13849-1:2015 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
I.S. EN 14044:2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
VDI 4007:2012-06 | Reliability goals - Determination, check, review, certificate |
BS 5760-2:1994 | Reliability of systems, equipment and components Guide to the assessment of reliability |
MIL-DTL-32015 Base Document:1999 | MICROPHONES, LINEAR, GENERAL SPECIFICATION FOR |
SAE ARP 1834 : 1997(S2018) | FAULT/FAILURE ANALYSIS FOR DIGITAL SYSTEMS AND EQUIPMENT |
MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
MIL-HDBK-344 Revision A:1993 | ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT |
MIL-M-9397 Revision E:1979 | FREQUENCY CONVERTER, MOBILE, TYPE MC-1A |
MIL-M-28787-458 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC ULTRAVIOLET LIGHT ERASABLE PROGRAMMABLE READ ONLY MEMORY (UV EPROM) MODULE |
PD ISO/PAS 19451-1:2016 | Application of ISO 26262:2011-2012 to semiconductors Application of concepts |
BS IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505<sup>TM</sup> |
I.S. EN 61514-2:2013 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV)) |
MIL-F-24259 Revision A:1987 | FLUID FLOWMETER, VOLUME VELOCITY TYPE |
MIL-PRF-26139 Revision E:2015 | TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1) |
08/30193470 DC : DRAFT NOV 2008 | BS EN 61508-6 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
MIL-S-16032 Revision M:1987 | SWITCH & DETECTORS, SHIPBOARD ALARM SYSTEM |
16/30320037 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL |
MIL-T-28735 Base Document:1970 | TEST SET RADAR AM UPM 137 |
MIL-STD-1635 Base Document:1973 | RELIABILITY GROWTH TESTING |
XP PREN 3567-001 : 1993 XP | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 001: TECHNICAL SPECIFICATION |
MIL-STD-1388-2 Revision B:1991 | DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD |
MIL-T-28764 Base Document:1971 | TEST SET, RADAR, AN/UPM-136 |
SR TSY 001171 : ISSUE 1 | METHODS AND PROCEDURES FOR SYSTEM RELIABILITY ANALYSIS |
MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
CEI EN 61514-2 : 2014 | INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY |
MIL-STD-1547 Revision B:1992 | ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES |
DOD HDBK 344 : A | ENVIRONMENTAL STRESS SCREENING (ESS) OF ELECTRONIC EQUIPMENT |
BS ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry. Safety-related parts of control systems Concept phase |
MIL-R-24086 Revision B:1972 | RADIAC SET AN PDR 45 |
MIL M 62545 : B | MODULE, STANDARD ELECTRONIC CONTROL |
MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
DEFSTAN 00-56(PT2)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
SAE ARD 50024 : A2003 | FIBER OPTIC COUPLED SENSORS FOR AEROSPACE APPLICATIONS |
GEIASTD0007B:2013 | LOGISTICS PRODUCT DATA |
DEFSTAN 00-41(PT3)/2(1989) : 1989 | MOD PRACTICES AND PROCEDURES FOR RELIABILITY AND MAINTAINABILITY - PART 3: RELIABILITY PREDICTION |
UNE-EN 61508-6:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
MIL-T-81832 Base Document:1971 | TEST SET, ALTIMETER SET AN/APM-348 |
MIL-M-28787-354 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE, BUS MODULE, KEY CODE AFG |
MIL-M-28787-351 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC 68000 SUPPORT MODULE, KEY CODE ASC |
MIL S 62546 : A | SENSOR, FIRE, OPTICAL |
DOD-W-24644 Base Document:1984 | WELDING MACHINE, ARC, DIRECT CURRENT, 300 AMPERE, VARIABLE VOLTAGE, TRANSFORMER RECTIFIER TYPE, DAMAGE CONTROL, LIGHT WEIGHT, PORTABLE (METRIC) |
MIL-STD-1543 Revision B:1988 | RELIABILITY PROGRAM REQUIREMENTS FOR SPACE AND LAUNCH VEHICLES |
DEFSTAN 00-41/3(1993) : 1993 | RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES |
XP PREN 3567-003 : 1993 XP | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - PART 003: SINGLE IN-LINE COUPLERS - PRODUCT STANDARD |
MIL-M-28787-356 Base Document:1991 | MODULES, DIGITAL, STANDARD ELECTRONIC SUPPORT, MPU COMMUNICATIONS MODULE, KEY CODE AHH |
SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
SAE AIR 1277 : 2005 | COOLING OF MILITARY AVIONIC EQUIPMENT |
IEC TS 62647-3:2014 | Process management for avionics - Aerospace and defence electronic systems containing lead-free solder - Part 3: Performance testing for systems containing lead-free solder and finishes |
SAE AS 5498 : 2017 | MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR INFLIGHT ICING DETECTION SYSTEMS |
BS ISO 26262-5:2011 | Road vehicles. Functional safety Product development at the hardware level |
I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
I.S. EN 61508-6:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
IEC 63003:2015 | Standard for the common test interface pin map configuration for high-density, single-tier electronics test requirements utilizing IEEE Std 1505™ |
ISO/PAS 19451-1:2016 | Application of ISO 26262:2011-2012 to semiconductors Part 1: Application of concepts |
ISO/TS 15998-2:2012 | Earth-moving machinery Machine control systems (MCS) using electronic components Part 2: Use and application of ISO 15998 |
I.S. EN 61204:1996 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS |
IEC 61514-2:2013 | Industrial process control systems - Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly |
04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
IEEE 3001.2:2017 | IEEE Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems |
EN 3567-001 : 2001 | AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 001: TECHNICAL SPECIFICATION |
EN 3567-004:2001 | AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 004: DOUBLE IN-LINE COUPLERS - PRODUCT STANDARD |
UNI EN 14043 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
UNI EN 14044 : 2014 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
ISO 25119-2:2010 | Tractors and machinery for agriculture and forestry Safety-related parts of control systems Part 2: Concept phase |
PD IEC/TS 62239-2:2017 | Process management for avionics. Management plan Preparation and maintenance of an electronic COTS assembly management plan |
MIL-M-28787-364 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC REGISTER MODULE, KEY CODE DGJ |
MIL-STD-2077 Revision B:1991 | TEST PROGRAM SETS GENERAL REQUIREMENTS FOR |
MIL-DTL-32086 Base Document:2004 | Intercom, Portable |
DEFSTAN 18-1/2(1990) : 1990 | GUIDELINES AND STANDARDS FOR THE PROCUREMENT OF MILITARY SPACECRAFT SYSTEMS |
MIL-STD-785 Revision B:1980 | RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION |
PD CLC/TR 50506-1:2007 | Railway applications. Communication, signalling and processing systems. Application guide for EN 50129 Cross-acceptance |
MIL-M-28787-357 Base Document:1991 | MODULES, DIGITAL, STANDARD ELECTRONIC CONTROLLER, DMA MODULE, KEY CODE FUM |
CEI EN 61508-6 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
MIL-C-28741 Revision A:1972 | Control Monitor, C-8430/UPX |
MIL-A-81917 Base Document:1973 | Aircraft Firing Circuit Test Set AN/AWM-54 |
MIL-M-28787-365 Revision A:1994 | MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE MODULE, KEY CODE DGP |
MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
16/30335990 DC : 0 | BS ISO 26262-11 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 11: GUIDELINE ON APPLICATION OF ISO 26262 TO SEMICONDUCTORS |
17/30318744 DC : 0 | BS ISO 20188 - SPACE SYSTEMS - PRODUCT ASSURANCE REQUIREMENTS FOR COMMERCIAL SATELLITES |
MIL-DTL-38449 Revision D:2010 | SIGNAL AND SIGNAL/INTERCOMMUNICATION AMPLIFIERS, UNIVERSAL, AERIAL REFUELING |
MIL-T-18232 Revision B:1968 | TARGET, AERIAL, POWERED, DESIGN AND CONSTRUCTION OF GENERAL SPECIFICATION FOR |
MIL-STD-2067 Base Document:1978 | AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR |
MIL-M-19160 Revision C:1970 | MOTOR GENERATOR, 60 HZ AC TO 400 HZ AC SHIPBOARD SERVICE |
08/30156645 DC : DRAFT JULY 2008 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
MIL-M-28787-366 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC STATIC RANDOM ACCESS MEMORY MODULE, KEY CODE DGG |
FAA AC 33.28-2 : 2003 | GUIDANCE MATERIAL FOR 14 CFR SECTION 33.28, RECIPROCATING ENGINES, ELECTRICAL AND ELECTRONIC ENGINE CONTROL SYSTEMS |
SAE ARP 5873 : 2015 | LED PASSENGER READING LIGHT ASSEMBLY |
SAE AS 6479 : 2014 | SPLICER, FUSION, FIBER OPTIC, AEROSPACE |
SAE AIR 6258 : 2015 | FIBER OPTIC SENSORS FOR AEROSPACE APPLICATIONS |
SAE ARP 1070 : 2014 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
S.R. CLC/TR 50506-2:2009 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 2: SAFETY ASSURANCE |
I.S. EN 61069-5:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY |
I.S. EN 62308:2006 | EQUIPMENT RELIABILITY - RELIABILITY ASSESSMENT METHODS |
IEC 63004:2015 | Standard for receiver fixture interface |
DIN EN 14044:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH SEQUENTIAL MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
DIN EN 14043:2014-04 | HIGH RISE AERIAL APPLIANCES FOR FIRE AND RESCUE SERVICE USE - TURNTABLE LADDERS WITH COMBINED MOVEMENTS - SAFETY AND PERFORMANCE REQUIREMENTS AND TEST METHODS |
BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
BS EN 3567-001:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Technical specification |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
BS EN 3567-003:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Single in-line couplers. Product standard |
BS EN ISO 13849-1:2015 | Safety of machinery. Safety-related parts of control systems General principles for design |
UNE-EN ISO 13849-1:2016 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN 14043:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with combined movements - Safety and performance requirements and test methods |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN 16602-30-09:2014 | Space product assurance - Availability analysis |
EN 16590-2:2014 | Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2010 modified) |
EN 14044:2014 | High rise aerial appliances for fire and rescue service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods |
EN 3567-003 : 2001 | AEROSPACE SERIES - IN-LINE COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH MIL-STD-1553B - PART 003: SINGLE IN-LINE COUPLERS - PRODUCT STANDARD |
IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
PD IEC/TS 62647-3:2014 | Process management for avionics. Aerospace and defence electronic systems containing lead-free solder Performance testing for systems containing lead-free solder and finishes |
BS IEC 61586:1997 | Estimation of the reliability of electrical connectors |
BS IEC 63004:2015 | Standard for receiver fixture interface |
MIL-S-48426 Revision A:1982 | SERVO ELECTRONICS, 10548193 |
MIL-T-81831 Base Document:1971 | TEST SET, ALTIMETER SET AN/APM-347 |
EIA 933 : 2015 | REQUIREMENTS FOR A COTS ASSEMBLY MANAGEMENT PLAN |
MIL-C-23952 Revision C:1992 | CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM |
MIL-M-28787-368 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC DYNAMIC RAM CONTROLLER MODULE, KEY CODE FER |
MIL-C-24040 Revision B:1993 | COMPUTER INDICATOR (SCALER) RADIAC, CP 792()/UD |
EIA STD 4899 : 2017-05 | REQUIREMENTS FOR AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
MIL-F-24701 Base Document:1988 | FLOWMETER, LIQUID, ULTRASONIC, NON-INTRUSIVE |
MIL-M-28787-359 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC FLIP/FLOP, D TYPE MODULE, KEY CODE KLR |
IEEE 650-2006 | IEEE Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations |
MIL-DTL-15303 Revision R:2016 | AUDIBLE SIGNALS: ALARMS, BELLS, BUZZERS, HORNS, AND SIRENS, ELECTRONIC, SHIPBOARD |
GEIA STD 0005-3 : 2013 | PERFORMANCE TESTING FOR AEROSPACE AND HIGH PERFORMANCE ELECTRONIC INTERCONNECTS CONTAINING PB-FREE SOLDER AND FINISHES |
MIL-T-49388 Revision A:1983 | TRAY ASSEMBLY, BATTERY CHARGING MX-10154 |
SAE ARP 6461 : 2013 | GUIDELINES FOR IMPLEMENTATION OF STRUCTURAL HEALTH MONITORING ON FIXED WING AIRCRAFT |
SAE ARP 6253 : 2017 | LEDS AND AIRCRAFT APPLICATIONS |
MIL-M-28787-352 Base Document:1989 | MODULES, DIGITAL, STANDARD ELECTRONIC 68000 CONTROL/MAINTENANCE MODULE, KEY CODE ADP |
13/30280048 DC : 0 | BS EN 16590-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
MIL-C-24219 Revision A:1970 | COUPLER, ANTENNA, AN/SRA-33, FOUR CHANNEL, AUTOMATICALLY TUNED |
MIL-S-24186 Revision B:1986 | SAMPLER, AIR PARTICLE, HD-732/UD |
DOD-L-24681 Base Document:1987 | LOUDSPEAKER, CONTROL OF VOLUME, AUTOMATIC (METRIC) |
SAE ARP 926 : 2018 | FAULT/FAILURE ANALYSIS PROCEDURE |
MIL-P-49090 Revision D:1992 | POWER SUPPLY 25 MILLIMETER, MICROCHANNEL INVERTER |
ISA TR84.00.02-1 : 2002 | SAFETY INSTRUMENTED FUNCTIONS (SIF) - SAFETY INTEGRITY LEVEL (SIL) EVALUATION TECHNIQUES - PART 1: INTRODUCTION |
DD IEC PAS 62647-3 : DRAFT SEP 2011 | PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE AND DEFENCE ELECTRONIC SYSTEMS CONTAINING LEAD-FREE SOLDER - PART 3: PERFORMANCE TESTING FOR SYSTEMS CONTAINING LEAD-FREE SOLDER AND FINISHES |
PD ISO/TS 15998-2:2012 | Earth-moving machinery. Machine control systems (MCS) using electronic components Use and application of ISO 15998 |
14/30298031 DC : 0 | BS EN 61069-5 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 5: ASSESSMENT OF SYSTEM DEPENDABILITY |
17/30325424 DC : 0 | BS ISO 25119-2 - TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 2: CONCEPT PHASE |
MIL-P-28739 Base Document:1970 | Pedestal Group, Antenna, for IFF Antennas AN/UPA-57 |
MIL-P-24587 Base Document:1979 | POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD) |
MIL-HDBK-246 Revision A:1982 | PROGRAM MANAGERS GUIDE FOR THE STANDARD ELECTRONIC MODULES PROGRAM |
MIL-I-16103 Revision F:1983 | INDICATOR, PHASE SEQUENCE, SWITCHBOARD & PANEL |
MIL-M-28787-393 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC INTERFACE, BUS MODULE, KEY CODE AMJ |
MIL-M-28787-358 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC DMA SUPPORT MODULE, KEY CODE FUN |
MIL-HDBK-845 Base Document:1992 | STANDARD POWER SUPPLY APPLICATIONS HANDBOOK |
DIN VDE 0661 : 1988 | PORTABLE PROTECTIVE DEVICES INTENDED FOR AN INCREASE IN THE PROTECTION LEVEL FOR 230 V A.C. RATED VOLTAGE, 16 A RATED CURRENT, RATED RESIDUAL CURRENT I[DELTA N] <= 30 MA |
MIL-M-28787-346 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC INTERRUPT CONTROL UNIT MODULE, KEY CODE SQY |
MIL-M-28787-335 Base Document:1990 | MODULES, DIGITAL, STANDARD ELECTRONIC DIRECT MEMORY ACCESS MODULE, KEY CODE NBP |
MIL-STD-2173 Base Document:1986 | RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT |
MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-M-24791-1 Base Document:1995 | MODULE, FIBER OPTIC, TRANSMITTER, DIGITAL, 160 MBD, ASSOCIATED DETAIL SPECIFICATION FOR |
DOD-C-85050 Base Document:1982 | CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
SAE AS 6349 : 2016 | MINIMUM PERFORMANCE STANDARD (MPS) FOR AN AIRBORNE AC TO AC CONVERTER |
MIL-M-28787-371 Base Document:1991 | MODULES, ANALOG, STANDARD ELECTRONIC INTERFACE, DISCRETE MODULE, KEY CODE TAV |
RE.AERO 70305 : A2000 | GUIDE FOR RELIABILITY CONTROL |
MIL-P-23141 Revision D:1968 | PLOTTING TABLE, ANTI SUBMARINE AND DEAD RECKONING (NAVAL SHIPBOARD) |
MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
MIL-M-28787-355 Base Document:1990 | MODULES, STANDARD ELECTRONIC PROGRAMMABLE READ ONLY MEMORY MODULE |
CLC/TR 50506-1:2007 | Railway applications - Communication, signalling and processing systems - Application Guide for EN 50129 - Part 1: Cross-acceptance |
FAA AC 20-157 : 2007 | HOW TO PREPARE RELIABILITY ASSESSMENT PLANS FOR AIRCRAFT SYSTEMS AND EQUIPMENT |
SAE ARP 1070E : 2019 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
PREN 3567-003 : 200P1 | AEROSPACE SERIES - COUPLERS FOR USE IN MULTIPLEX DATA BUS SYSTEMS IN ACCORDANCE WITH STANAG 3838 - SINGLE IN-LINE COUPLERS - PRODUCT STANDARD |
S.R. CLC/TR 50506-1:2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - APPLICATION GUIDE FOR EN 50129 - PART 1: CROSS-ACCEPTANCE |
SAE ARP 5415 : 2008 | USER'S MANUAL FOR CERTIFICATION OF AIRCRAFT ELECTRICAL/ELECTRONIC SYSTEMS FOR THE INDIRECT EFFECTS OF LIGHTNING |
AEDP-6 : 2014 | NATO ADVANCED DATA STORAGE INTERFACE REQUIREMENTS AND IMPLEMENTATION GUIDE |
I.S. EN 16602-30-09:2014 | SPACE PRODUCT ASSURANCE - AVAILABILITY ANALYSIS |
EIA RB4 : A1969 | RELIABILITY QUANTIFICATION |
IEC 61204:1993+AMD1:2001 CSV | Low-voltage power supply devices, d.c. output - Performance characteristics |
DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
BS EN 14043:2014 | High rise aerial appliances for fire and rescue service use. Turntable ladders with combined movements. Safety and performance requirements and test methods |
IEC 62308:2006 | Equipment reliability - Reliability assessment methods |
BS EN 3567-004:2001 | Aerospace series. In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B Double in-line couplers. Product standard |
BS EN 60825-2 : 2004 | SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCS) |
IEC TS 62861:2017 | Guidelines for principal component reliability testing for LED light sources and LED luminaires |
EN 61069-5:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 5: Assessment of system dependability |
EN 61204:1995/A1:2001 | LOW-VOLTAGE POWER SUPPLY DEVICES, D.C. OUTPUT - PERFORMANCE CHARACTERISTICS (IEC 61204:1993, MODIFIED + A1:2001) |
MIL R 22097 : G | RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR |
MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
MIL C 39003 : H | CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL R 39007 : G (3) SUPP 1A | RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
MIL C 39018 : C | CAPACITORS, FIXED, ELECTROLYTIC (ALUM. OXIDE), ESTABLISHED RELIABILITY AND NON- ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL F 15160 : G | FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR |
MIL R 83726 : B | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR)O.1 TO 500 SECONDS |
MIL C 15305 : E | COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
MIL C 39022 : E | CAPACITOR, FIXED, METALLIZED PAPER, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC DIRECT AND ALTERNATING CURRENT, HERMETICALLY SEALED IN METAL CASE) ESTABLISHED RELIABILITY, GEN. SPEC. FOR |
MIL-R-39008 Revision C:1990 | RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL R 22684 : D | RESISTOR, FIXED, FILM, INSULATED, GENERAL SPECIFICATION FOR |
MIL C 55302 : E | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE |
MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
MIL C 23269 : E | CAPACITORS, FIXED, GLASS DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL-STD-975 Revision M:1994 | NASA STANDARD (EEE) PARTS LIST |
MIL S 83734 : F | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
MIL R 39005 : D | RESISTOR, FIXED, WIREWOUND, (ACCURATE), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
W-F-1814 Revision D:2013 | FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY |
MIL-STD-1547 Revision B:1992 | ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES |
MIL-R-11 Revision G:1994 | RESISTORS, FIXED, COMPOSITION (INSULATED), GENERAL SPECIFICATION FOR |
MIL R 83725 : B | RELAY, VACUUM, GENERAL SPECIFICATION FOR |
MIL-C-11272 Revision E:2008 | CAPACITORS, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
MIL C 14157 : LATEST | CAPACITOR, FIXED, PAPER (PAPER PLASTIC) OR PLASTIC DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL R 39009 : C (3) SUPP 1 | RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED) ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL C 39019 : C | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR |
MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
W-F-1726 Base Document:1973 | |
MIL C 81 : C | CAPACITORS VARIABLE CERAMIC DIELECTRIC GENERAL SPECIFICATION FOR |
MIL R 93 : F | RESISTORS, FIXED, WIRE-WOUND (ACCURATE), GENERAL SPECIFICATION FOR |
MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
MIL-R-11804 Revision E:1965 | RESISTOR, FIXED, FILM (POWER TYPE), GENERAL SPECIFICATION FOR |
W-C-375 Revision E:2013 | CIRCUIT BREAKERS, MOLDED CASE; BRANCH CIRCUIT AND SERVICE |
MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
MIL-R-19523 Revision B:1990 | RELAY, CONTROL, NAVAL SHIPBOARD |
MIL R 55182 : F | RESISTORS, FIXED, FILM, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL C 83723 : E | CONNECTORS, ELECTRICAL (CIRCULAR, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS GENERAL SPECIFICATION FOR |
MIL C 39012 : C | GENERAL SPECIFICATION FOR RADIO FREQUENCY COAXIAL CONNECTORS |
MIL C 14409 : D | CAPACITOR, VARIABLE (PISTON TYPE, TUBULAR TRIMMER), GENERAL SPECIFICATION FOR |
MIL T 27 : E | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) GENERAL SPECIFICATION FOR |
MIL C 55514 : C | CAPACITOR, FIXED, PLASTIC (OR METALLIZED PLASTIC) DIELECTRIC, DC OR DC AC, IN NONMETAL CASES, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
MIL C 83733 : C | CONNECTOR, ELECTRICAL, MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
MIL R 39015 : C (3) | RESISTOR, VARIABLE, WIRE WOUND (LEAD SCREW ACTUATED), ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL R 39035 : C (2) SUPP 1 | RESISTOR, VARIABLE, NONWIRE WOUND (ADJUSTMENT TYPE) ESTABLISHED RELIABILITY |
MIL C 19978 : F | CAPACITORS, FIXED, PLASTIC (OR PAPER-PLASTIC) DIELECTRIC, (HERMETICALLY SEALED IN METAL, CERAMIC, OR GLASS CASES) ESTABLISHED AND NON-ESTABLISHED RELIABILITY - GENERAL SPECIFICATION FOR |
MIL C 25516 : D | CONNECTOR, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
MIL R 39017 : E (5) SUPP 1 | RESISTOR, FIXED, FILM (INSULATED) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL C 3098 : G | CRYSTAL UNITS, QUARTZ, GENERAL SPECIFICATION FOR |
MIL F 5372 : D | FUSE, CURRENT LIMITER TYPE, AIRCRAFT |
MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
MIL C 5 : G | CAPACITOR, FIXED, MICA DIELECTRIC, GENERAL SPECIFICATION FOR |
MIL-C-10950 Revision C:1968 | CAPACITOR, FIXED, MICA DIELECTRIC, BUTTON STYLE, GENERAL SPECIFICATION FOR |
MIL R 23285 : B | RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR |
MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
MIL M 10304 : E | METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR |
MIL R 39016 : E | RELAY, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL-C-81511 Revision F:1992 | CONNECTOR, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT ENVIRONMENT RESISTING, AND ACCESSORIES GENERAL SPECIFICATION FOR |
MIL S 3950 : F | SWITCH, TOGGLE ENVIRONMENTALLY SEALED, GENERAL SPECIFICATION FOR |
MIL R 6106 : J | RELAYS, ELECTROMAGNETIC [INCLUDING ESTABLISHED RELIABILITY [ER] TYPES |
MIL S 19500 : J | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
MIL C 83421 : B | CAPACITOR, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC) HERMETICALLY SEALED IN METAL CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL-V-95 Revision B:1989 | VIBRATOR, INTERRUPTER AND SELF RECTIFYING |
MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
MIL C 20 : H | CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY & NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL C 3767 : LATEST | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL (POWER, BLADED TYPE), |
MIL C 39006 : E | CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL C 3655 : C | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL [COAXIAL SERIES TWIN] AND ASSOCIATED FITTINGS, GENERAL SPECIFICATION FOR |
MIL-C-18312 Revision G:2013 | CAPACITOR, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR |
MIL C 39014 : E | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE) ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
MIL C 26482 : G | CONNECTOR, ELECTRICAL (CIRCULAR, MINIATURE, QUICK DISCONNECT, ENVIRONMENT RESISTING) RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
MIL R 12934 : H NOTICE 1 | RESISTOR, VARIABLE, WIREWOUND, PRECISION GENERAL SPECIFICATION FOR |
MIL C 39001 : B | CAPACITOR, FIXED, MICA DIELECTRIC, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR.. |
MIL L 6363 : G | LAMP, INCANDESCENT, AVIATION SERVICE GENERAL SPECIFICATION FOR |
MIL-C-11015 Revision F:2008 | CAPACITOR, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE), GENERAL SPECIFICATION FOR |
MIL R 39023 : A | RESISTOR, VARIABLE, NON WIRE WOUND, PRECISION GENERAL SPECIFICATION FOR |
MIL P 55110 : LATEST | PRINTED WIRING BOARD, RIGID GENERAL SPECIFICATION FOR |
MIL-C-23183 Revision B:1972 | CAPACITORS, FIXER OR VARIABLE, VACUUM OR GAS DIELECTRIC, GENERAL SPECIFICATION FOR |
MIL C 11693 : C | CAPACITOR, FEED THROUGH, RADIO INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METALLIC CASE), STYLE CZ20 |
MIL R 83401 : F (4) SUPP 1A | RESISTOR NETWORKS, FIXED, FILM, GENERAL SPECIFICATION FOR |
MIL R 39002 : 0 | RESISTOR, VARIABLE, WIREWOUND, SEMI PRECISION, GENERAL SPECIFICATION FOR |
MIL C 62 : F | CAPACITOR, FIXED, ELECTROLYTIC (DC, ALUMINUM, DRY ELECTROLYTE, POLARIZED), GENERAL SPECIFICATION FOR |
MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
MIL C 21097 : E | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
MIL-T-55631 Base Document:1972 | TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR |
MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
MIL R 94 : E | RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR |
MIL-C-92 Revision B:1969 | CAPACITORS, VARIABLE, AIR DIELECTRIC (TRIMMER) GENERAL SPECIFICATION FOR |
MIL C 3965 : F | CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.