MIL-DTL-53126 Revision A:2012
Current
The latest, up-to-date edition.
Power Distribution, Illumination Systems, Electrical General Specification for
16-10-2012
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - TEST METHODS - GENERAL REQUIREMENTS
APPENDIX B - PACKAGING REQUIREMENTS
Specifies soldier-portable, power distribution systems for use with the DoD Standard Family of Generator Sets and illumination utility sets.
| DevelopmentNote |
Supersedes MIL E 53126. (11/2012)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers soldier-portable, power distribution systems for use with the DoD Standard Family of Generator Sets and illumination utility sets. Three of the end items are three phase systems, one is a single phase system, and the utility set contains extension cords, branch circuits and lighting equipment. The three phase systems can be used in various combinations with each other to create a power grid which is generally limited to a 100 feet radius per system (i.e. 300 feet total) in order to prevent excessive voltage loss. The utility set can be used with any of the systems to achieve internal shelter wiring and lighting.
| SAE AS 34011 : 2011 | CONNECTORS, RECEPTACLE, ELECTRIC, CABLE CONNECTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| MIL-DTL-52286 Revision D:2010 | CABLE ASSEMBLIES, POWER, ELECTRICAL (WITH MOLDED ON TERMINATIONS), GENERAL SPECIFICATION FOR |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MS90558 Revision G:2012 | CONNECTOR, PLUG, ELECTRICAL, WALL MOUNTING, (WITH COUPLING RING) CLASS L, (EQUIPMENT) |
| SAE ARP 1199 : 1998 | SELECTION, APPLICATION, AND INSPECTION OF ELECTRIC OVERCURRENT PROTECTIVE DEVICES |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| SAE AS 34021 : 2017 | CONNECTOR, RECEPTACLE, ELECTRIC, BOX MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| SAE AS 34061 : 2011 | CONNECTORS, PLUG, ELECTRIC, FRONT RELEASE, CRIMP CONTACT, AN TYPE |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| UL 943:5ED 2016-05-17 | Ground-Fault Circuit-Interrupters |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-PRF-121 Revision G:2001 | BARRIER MATERIALS, GREASEPROOF, WATERPROOF, FLEXIBLE, HEAT-SEALABLE |
| MS90556 Revision J:2012 | CONNECTOR, PLUG, ELECTRICAL, STRAIGHT, CLASS L |
| ANSI/NCSL Z540 1 : 94(R2002) | CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL-L-85762 Revision A:1988 | LIGHTING, AIRCRAFT, INTERIOR, NIGHT VISION |
| SAE AS 50151 : 2015 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
| NEMA WD 6 : 2016 | WIRING DEVICES - DIMENSIONAL SPECIFICATIONS |
| MIL-STD-882 Revision E:2012 | System Safety |
| MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| MS90555 Revision G:2012 | CONNECTOR, RECEPTACLE, ELECTRICAL, WALL MOUNTING, CLASS L (POWER SOURCE RECEPTACLE) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| A-A-3174 Base Document:1998 | PLASTIC SHEET, POLYOLEFIN |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ASTM D 6251/D6251M : 2011 : REDLINE | Standard Specification for Wood-Cleated Panelboard Shipping Boxes |
| MS90557 Revision J:2012 | CONNECTOR, RECEPTACLE, ELECTRICAL, CABLE CONNECTING, (WITHOUT COUPLING RING), CLASS L |
| ASTM D 1974/D1974M : 2016 : REDLINE | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
| MIL-HDBK-705 Revision C:1987 | GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS |
| A-A-1898 Revision D:2012 | CUSHIONING MATERIAL, CELLULOSIC, PACKAGING |
| MIL-STD-209 Revision K:2005 | LIFTING AND TIEDOWN PROVISIONS |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.