MIL-DTL-5624 Revision W:2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Turbine Fuel, Aviation, Grades JP-5 (NATO F-44)
Available format(s)
PDF
Language(s)
English
Published date
28-03-2016
Publisher
Superseded date
10-05-2025
Superseded by
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - METHOD FOR DETERMINATION OF
FILTRATION TIME AND TOTAL SOLIDS
(PARTICULATE)
Specifies two grades of aviation turbine fuel NATO F-40 (JP-4) and NATO F-44 (JP-5).
| DevelopmentNote |
Supersedes MIL PRF 5624 (S). (10/2000)
|
| DocumentType |
Standard
|
| Pages |
23
|
| ProductNote |
New child NOT 1 2020 is now added
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This specification covers only high flash point aviation turbine fuel NATO F-44 (JP-5) (see 6.1). Requirements for NATO F-40 (JP-4) have been removed from this specification without replacement. Synthesized hydrocarbons from non-conventional sources require specific guidance that is outside the scope of MIL-DTL-5624. This guidance is found in the latest revisions of ASTM D1655 and ASTM D7566.
| MIL-PRF-81380 Revision F:2015 | Filter/Monitor, Contamination, Helicopter in-Flight Refueling System |
| MIL-PRF-32517 Base Document:2015 | Splice, Conductor, Electrical, Coaxial Cable, Matched Impedance, General Specification for |
| SAE AIR744C | Aerospace Auxiliary Power Sources |
| MIL-DTL-83054 Revision C:2003 | Baffle and Inerting Material, Aircraft Fuel Tank |
| SAE AS5356B | Coupling, Fuel Line, Flexible, 125 psi General Specification for |
| MIL-DTL-27422 Revision F:2014 | Tank, Fuel, Crash-Resistant, Ballistic-Tolerant, Aircraft |
| SAE AS85560B | Bearings, Fiber Reinforced Plastic, Sleeve, Plain and Flanged, Self-Lubricating; General Specification For |
| MIL-PRF-8805-48 Revision H:2004 | Switches, Sensitive, Limit, Roller Lever, Self-Return, Resilient Seal, Fluid Resistant |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-32080 Revision G:2014 | Truck, Aircraft Fueling-Defueling, 6,000 Gallon, A/S32R-11 |
| MIL-PRF-24667 Revision C:2008 | Coating System, Nonskid, for Roll or Spray Application |
| MIL-DTL-85052 Revision B:2005 | Clamp, Loop, Cushion, General Specification for |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| MIL-PRF-23653 Revision D:2009 | Plastic Tiles, Vibration Damping |
| MIL-STD-1518 Revision E:2014 | Storage, Handling, and Servicing of Aviation Fuels, Lubricating Oils, And Hydraulic Fluids at Contractor Facilities |
| MIL-PRF-25439 Revision C:2013 | Transmitter Rate of Flow, In-Flight Refueling, 0-10,000 PPM, Type MB-3 |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| MIL-DTL-9395-31 Revision E:2006 | Switches, Pressure, (Gage), Type II, 5 Amperes |
| MIL-DTL-5815 Revision H:2012 | Antenna, Airborne, UHF - Band, General Specification for |
| MIL-PRF-32177 Revision A:2012 | Cleaning Compound, Nonskid |
| MIL-DTL-25038 Revision J:2012 | Wire, Electrical, High Temperature, Fire Resistant, and Flight Critical |
| MIL-PRF-32098 Revision A:2004 | Ultrafiltration System, 10-Gallon Per Minute Oily Waste Membrane (OWMS-10) |
| MIL-DTL-9395-6 Revision C:2006 | Switches, Pressure (Absolute), Type I, SPDT, 3 Amperes |
| SAE AS85485B | Cable, Electric, Filter Line, Radio Frequency Absorptive |
| SAE AS83519C | Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For |
| SAE AS23190C | Wiring, Positioning, and Support Accessories |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ASTM D 7171 : 2016 : REDLINE | Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
| SAE AS81714B | Terminal Junction System (TJS), Environment Resistant General Specification For |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| MIL-DTL-83797 Revision C:2008 | Hose, Rubber, Lightweight, Medium Pressure, General Specification for |
| MIL-DTL-83731 Revision E:2016 | Switches, Toggle, Unsealed and Sealed Toggle General Specification for |
| MIL-DTL-24640 Revision C:2011 | Cables, Lightweight, Low Smoke, Electric, for Shipboard Use, General Specification for |
| A-A-59498 Base Document:1999 | Truck, Forklift, Diesel Engine Driven, DS Safety Rated, for Shipboard Use (No S/S Document) |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-DTL-5578 Revision D:2008 | Tanks, Fuel, Aircraft, Self-Sealing |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-PRF-7061 Revision E:2014 | Hose, Elastomeric, Aircraft, Self-Sealing, Aromatic Fuel |
| A-A-59492 Base Document:1999 | For Truck, Forklift, Diesel Engine Driven, 120 Inch Lift Height, DS Safety Rated, Pneumatic Rubber Tires, Rough Terrain, For Shipboard Use (No S/S Document) |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-DTL-32496 Base Document:2014 | Generator Sets, Skid Mounted, Trailer Mounted Advanced Medium-Sized Mobile Power Sources, Tactical Diesel Fuel Driven, Alternating Current 5 through 60 Kilowatts General Specification for |
| MIL-PRF-8805-49 Revision J:2012 | Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
| MIL-DTL-24299 Revision B:2017 | Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard |
| MIL-PRF-62678 Revision B:2010 | Pump, Fuel, Electrical: 12 and 24 Volt Direct Current (Metric) |
| P-W-2891 Revision A:2002 | Wipe Solvents, Exempt and Non-Exempt |
| MIL-DTL-25708 Revision F:2008 | Antennas, Blade, L-Band, General Specification for |
| MIL-PRF-32490 Base Document:2014 | Additive, Lubricity Improver, Distillate Fuel |
| MIL-PRF-32020 Revision B:2011 | Prover, Liquid Volumetric Positive Displacement Meter |
| SAE ARP5369B | Guidelines for Wire Identification Marking Using the Hot Stamp Process |
| SAE AS81934B | Bearings, Sleeve, Plain and Flanged, Self-Lubricating |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MIL-DTL-25516 Revision F:2004 | Connectors, Electrical, Miniature, Coaxial, Environment Resistant Type, General Specification for |
| MIL-PRF-32097 Revision A:2005 | Filtration Module, Oily Waste Membrane Type |
| MIL-DTL-8777 Revision F:2011 | Wire, Electrical, Silicone-Insulated, Copper, 600-Volt, 200 Degrees C |
| MIL-DTL-81381 Revision C:2005 | Wire, Electric, Polyimide-Insulated, Copper or Copper Alloy |
| MIL-DTL-38195 Revision D:2000 | Generator Set, Gas Turbine Engine, 60 KW 400 Hertz, General Purpose |
| MIL-DTL-3702 Revision F:2012 | Cable, Power, Electrical: Ignition, High-Tension |
| MIL-DTL-83528 Revision H:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
| SAE AIR5691A | Guidance for the Design and Installation of Fuel Quantity Indicating Systems |
| MIL-DTL-9395-39 Revision D:2010 | Switches, Pressure, (Gauge) Type II, Low Level to 5 Amperes |
| MIL-PRF-38299 Revision E:2011 | Fluid, Purging, for Preserving Fuel Tanks of Jet Aircraft |
| MIL-PRF-32278 Revision B:2008 | Gauge, Tactical Automated Tank (TATG) Fuels Operational Readiness Capability Equipment (Force) (No S/S Document) |
| MIL-DTL-81248 Revision C:2006 | Detector Pad, Free Water |
| MIL-DTL-83526 Revision D:2014 | Connectors, Fiber Optic, Circular, Environmental Resistant, Hermaphroditic, General Specification for |
| MIL-PRF-81352 Revision C:2005 | Coatings, Aircraft Touch-Up |
| SAE ARP81490A | Transmission Lines, Transverse Electromagnetic Mode |
| SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
| SAE AS620G | Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft |
| SAE AS5958F | Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for |
| ASTM D 3343 : 2016 : REDLINE | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| ASTM D 1405/D1405M : 2008 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| MIL-PRF-8805-39 Revision J:2014 | Switches, Sensitive, Limit, Plunger, 7 Amperes, Resilient Seal, Fluid Resistant |
| MIL-DTL-85061 Revision C:2009 | Coupling, Fuel Line, Flexible, 125 PSI |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| SAE AS82819 | Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm Oscillation (13 fpm), -65 to +160 °F (-54 to +71 °C), Liners Less Than 0.015 inches |
| MIL-PRF-8805-43 Revision K:2014 | Switches, Sensitive, Plunger, Resilient Seal, Fluid Resistant |
| MIL-PRF-81975 Revision C:2008 | Couplings, Regulated, Aerial Pressure Refueling Type MA-2, Type MA-3 and Type MA-4 |
| MIL-DTL-83723-27 Revision C:2015 | Connectors, Electrical, Backshell, with Heat-Shrinkable Strain-Relief Boot (Straight and Right Angle), Threaded Coupling |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL-PRF-32058 Revision B:2017 | Chock, Wheel-Track - Aviation, Adjustable Rope Type |
| MIL-DTL-49292 Revision B:2006 | Cable Assemblies, Nonpressure Proof, Fiber Optic, Metric, General Specification for |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| MIL-DTL-7899 Revision D:2014 | Valve, Check, Aircraft Fuel System |
| MIL-DTL-32234 Base Document:2007 | Connectors, Electrical, Ultra High Density, Modular, Blade and Fork, Eight Row, General Specification for |
| FAA AC 20-24 : 2014 | APPROVAL OF PROPULSION FUELS, ADDITIVES, AND LUBRICATING OILS |
| MIL-PRF-26139 Revision E:2015 | Tester, Pressurized Cabin Leakage, Aircraft, (AF/M24T-3 and AF/M32T-1) |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-PRF-85285 Revision E:2012 | Topcoat, Aircraft and Support Equipment |
| MIL-PRF-32090 Revision A:2016 | Delivery System, Aerial, Bulk Fuel |
| MIL-PRF-53051 Revision C:2017 | Pumping Assemblies, Wheel-Mounted, Diesel Engine Driven, Bulk Transfer, Fuel and Potable Water Pumping Service |
| MIL-S-8805-85 Revision E:2005 | Switch, Sensitive, Rotary (Non-Self Return), 4 Amperes, Resilient Seal (No S/S Document) |
| MIL-DTL-9395-27 Revision G:2006 | Switches, Pressure, Gauge (Type II), 3 Amperes |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| MS21346 Revision F:2005 | Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole, .469 Mounting Bushing |
| MIL-PRF-62430 Revision B:2010 | Harness Assembly, Thermocouple |
| SAE AS81819A | Bearings, Plain, Self-Aligning, Self-Lubricating, High Speed Oscillation -65 to +160 °F General Specification For |
| SAE AIR7484 | Guidance on the Impact of Fuel Properties on Fuel System Design and Operation |
| SAE AS2078A | Test Methods, Hose Assemblies, Polytetrafluoroethylene (PTFE) |
| SAE ARP1827C | Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance |
| SAE AS81824D | Splice, Electric, Crimp, Copper, Environment Resistant |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| MIL-PRF-8805-40 Revision K:2014 | Switches, Sensitive, Plunger, Resilient Seal, Fluid Resistant |
| MIL-PRF-57267 Base Document:2017 | Coupling, Aerial Pressure Refueling Type MA-5 |
| MIL-DTL-9395-26 Revision D:2006 | Switches, Pressure, Absolute (Type I), 3 Amperes |
| MIL-DTL-25707 Revision G:2015 | Antenna, Flush Mount, L-Band, General Specification For |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| MS21347 Revision K:2005 | Switch, Toggle, Positive Break, Miniature, Toggle Sealed, and --Lever Lock-- Miniature, Toggle Sealed, Integrated Wire Terminals, Double Pole, .469 Mounting Bushing |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ASTM D 7224 : 2014-12 | TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF KEROSINE-TYPE AVIATION TURBINE FUELS CONTAINING ADDITIVES BY PORTABLE SEPAROMETER |
| MIL-PRF-32148 Base Document:2005 | Filter Separator Elements, Fluid, Pressure, Aviation and Distillate Fuel, Naval Shipboard |
| MIL-DTL-9395-8 Revision E:2006 | Switches, Pressure, (Gage), Type II, SPDT, 10 Amperes |
| MIL-DTL-22612 Revision D:2015 | Detector, Combined Contaminated Fuel |
| SAE AS60491 | Sleeve, Protection, For Cable and Harness Protection |
| MIL-PRF-38715 Revision B:1996 | Indicator, Combustible Gas and Oxygen |
| MIL-DTL-6615 Revision G:2008 | Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
| MIL-PRF-87260 Revision B:2006 | Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| MIL-DTL-49055 Revision G:2017 | Cables, Power, Electrical, (Flexible, Flat, Unshielded), (Round Conductor), General Specification for |
| MIL-PRF-8805-80 Revision G:2009 | Switch, Sensitive, Limit, Hermetic Seal |
| MIL-PRF-83323 Revision D:2016 | Tester, Universal Receptacle, Aerial Refueling |
| MIL-DTL-9395-29 Revision C:2006 | Switches, Pressure, (Differential) (Type III), 4 Amperes |
| MIL-PRF-62625 Revision B:2009 | Valve, Fuel-Drain |
| MIL-DTL-26500 Revision G:2011 | Connectors, General Purpose, Electrical, Miniature, Circular, Environment Resisting or Hermetically Sealed, General Specification for |
| MIL-DTL-83733 Revision E:2006 | Connectors, Electrical Miniature, Rectangular Type, Rack to Panel, Environment Resisting, 200 Degrees C Total Continuous Operating Temperature, General Specification For |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| MIL-PRF-370 Revision K:2017 | Hose and Hose Assemblies, Nonmetallic: Elastomeric, Liquid Fuel |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| SAE AS5729A | O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
| MIL-DTL-62548 Revision C:2010 | Lead, Ignition |
| MIL-PRF-52109 Revision H:2010 | Pumping Assemblies, Portable, Bulk Transfer Fuel and Water Pumping Service |
| MIL-PRF-53064 Revision C:2017 | Hose Assembly, Elastomer: Lightweight, Collapsible; Liquid Fuel |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| MIL-PRF-83779 Revision C:2013 | Water Indicating Paste |
| MIL-PRF-32233 Revision B:2015 | Tanks, Collapsible, 3,000, 10,000, 20,000, 50,000 and 210,000 U.S. Gallons, Fuel |
| SAE AIR4170B | Reticulated Polyurethane Foam Explosion Suppression Material for Fuel Systems and Dry Bays |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| SAE AS5877B | Detailed Specification for Aircraft Pressure Refueling Nozzle |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| BS EN 3716-001:2006 | Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification |
| EN 3716-001:2006 | Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification |
| MIL-F-26301 Revision H:2014 | Flasher, Solid State, Aircraft Navigational Light, General Specification for |
| MIL-DTL-9129 Revision G:2014 | Discharges, Electrostatic General Specification for |
| IP 355 : 2014 | PETROLEUM PRODUCTS - ESTIMATION OF NET SPECIFIC ENERGY OF AVIATION TURBINE FUELS USING HYDROGEN CONTENT DATA |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| MIL-PRF-81904 Revision C:2011 | Coating Compound, Thermal-Insulation |
| BS ISO 8829-1:2009 | Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid |
| MIL-HDBK-844 Revision B:2014 | Aircraft Refueling Handbook for Navy/Marine Corps Aircraft |
| ISO 8829-1:2009 | Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 1: Metallic (stainless steel) braid |
| MIL-STD-3013 Revision A:2008 | Glossary of Definitions, Ground Rules, and Mission Profiles to Define Air Vehicle Performance Capability |
| MIL-PRF-83041 Revision C:2000 | Filter-Separator, Liquid Fuel, Skid Mounted FFU-15/E (No S/S Document) |
| SAE AS506 | High Temperature Insulated Terminals & Splices |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| MIL-DTL-9395-32 Revision D:2006 | Switches, Pressure, Differential (Type III), 4 Amperes |
| MIL-DTL-9395-38 Revision C:2006 | Switches, Pressure, (Gage) Type II, Low Level to 5 Amperes |
| MIL-PRF-32007 Base Document:2003 | Oily Wastewater Separation System, 6-7-Gallon Per Minute Navy Integrated Membrane System (Nims) |
| MIL-PRF-32470 Base Document:2013 | Truck, Forklift, 10,000 Lb Capacity, Variable Reach, Rough Terrain |
| MIL-DTL-83420 Revision P:2017 | Wire Rope, Flexible, for Aircraft Control, General Specification for |
| MIL-DTL-62421 Revision A:2009 | Control, Unit, Electronic, Digital |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-DTL-38159 Revision D:2015 | Connectors, Electric, Ramp Power, 416/240 Volts |
| SAE AS5590A | Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For |
| MIL-PRF-15618 Revision H:2006 | Fluid, Pressure, Aviation and Distillate Fuel, Naval Shipboard |
| MIL-DTL-52849 Revision E:2008 | Test Kit - Aviation Fuel Contamination (Portable) |
| MIL-PRF-81298 Revision E:2011 | Dye, Liquid for the Detection of Leaks in Aircraft Fuel Systems |
| SAE AS83819 | Bearings, Plain, Self-Aligning, Self-Lubricating, 1400 cpm (15 fpm), Oscillation, -65 to +160 °F (-54 to +71 °C) |
| SAE AS81703A | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting |
| SAE AS6116A | Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for |
| SAE AS8942 | Bearings, Plain and PTFE Lined, Self - Aligning |
| SAE AS81820D | Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation |
| ASTM D 1405/D1405M : 2008 : R2013 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) |
| SAE AMSS83474B | Shims, Molded, Filled Resin Compound and Sheet Prepeg |
| SAE AS5751 | Design and Operating Requirements of the Onboard Aircraft Refueling System and Associated Ground Refueling Equipment Interface |
| ASTM D 3701 : 2017 : REDLINE | Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM D 5452 : 2012 : REDLINE | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 7170 : 2016 : REDLINE | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method |
| ASTM D 3227 : 2016 : REDLINE | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 7619 : 2017 : REDLINE | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ASTM D 129 : 2013-08 | TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD) |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
| ASTM D 7154 : 2015 : REDLINE | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
| ASTM D 7224 : 2014-12 | TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF KEROSINE-TYPE AVIATION TURBINE FUELS CONTAINING ADDITIVES BY PORTABLE SEPAROMETER |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 7345 : 2017 : REDLINE | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 6379 : 2011 : REDLINE | TEST METHOD FOR DETERMINATION OF AROMATIC HYDROCARBON TYPES IN AVIATION FUELS AND PETROLEUM DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| ASTM D 7171 : 2016 : REDLINE | Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
| QPL 25017 : 20171027 | QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - MIL-PRF-25017 - INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| ASTM D 1322 : 2015-06 | TEST METHOD FOR SMOKE POINT OF KEROSINE AND AVIATION TURBINE FUEL |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.