MIL-DTL-83522 Revision E:2013
Current
Current
The latest, up-to-date edition.
Connectors, Fiber Optic, Single Ferrule, General Specification for
Available format(s)
PDF
Published date
17-05-2013
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the characteristics, performance and testing criteria for single ferrule fiber optic connectors.
| DevelopmentNote |
Supersedes MIL C 83522 (D). (05/2013)
|
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification defines the characteristics, performance and testing criteria for single ferrule fiber optic connectors. The connectors described herein cover families as listed in 1.2. The connectors are supplied under a MIL-STD-790 reliability assurance program. See 6.1 for restrictions on intended use and applications.
| MIL-STD-1678-6 Revision A:2016 | Fiber Optic Cabling Systems Requirements and Measurements (Part 6: Parts and Support Equipment Commonality and Standardization Requirements) (Part 6 of 6 Parts) |
| MIL-DTL-32529 Base Document:2015 | Power Electronic Conversion Equipment, Naval Shipboard |
| MIL-STD-2042-6 Revision C:2016 | Fiber Optic Cable Topology Installation Standard Methods forSurface Ships and Submarines(Tests) (Part 6 of 7 Parts) |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| MIL-STD-1678-1 Revision D:2016 | Fiber Optic Cabling Systems Requirements and Measurements (Part 1: Design, Installation and Maintenance Requirements) (Part 1 of 6 Parts) |
| MIL-DTL-917 Revision F:2014 | Electric Power Equipment, Basic Requirements for |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-83522-16 Revision C:2013 | Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy |
| MIL-DTL-83522-17 Revision C:2013 | Connector, Fiber Optic, Single Terminus, Adapter, Bayonet Coupling (ST Style), 2.5 Millimeter Diameter Ferrule, Bulkhead Panel Mount |
| MIL-STD-1678-2 Revision A:2013 | Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements) (Part 2 of 6 Parts) |
| MIL-STD-2042-1 Revision C:2016 | Fiber Optic Cable Topology Installation Standard Methodsfor SurfaceShips and Submarines(Cables) (Part 1of 7 Parts) |
| MIL-STD-2042-5 Revision C:2016 | Fiber Optic Cable Topology Installation Standard Methods for Surface Ships and Submarines (Connectors and Interconnections) (Part 5 of 7 Parts) |
| TIA 455-14 : A1992(R2012) | FIBER OPTIC SHOCK TEST (SPECIFIED PULSE) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| TIA/EIA 455-71 : A1999(R2014) | PROCEDURE TO MEASURE TEMPERATURE-SHOCK EFFECTS ON FIBER OPTIC COMPONENTS |
| TIA/EIA 455-11 : D2010(R2014) | FOTP-11 - VIBRATION TEST PROCEDURE FOR FIBER OPTIC COMPONENTS AND CABLES |
| TIA/EIA 455-1 : B1998(R2008) | CABLE FLEXING FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| TIA 455-12 : B2008(R2013) | FLUID IMMERSION TEST FOR FIBER OPTIC COMPONENTS - FOTP-12 |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| TIA 455-36 : A1986(R2012) | FOTP-36 - TWIST TEST FOR FIBER OPTIC CONNECTING DEVICES |
| TIA 455-21 : A1988(R2012) | FOTP-21 MATING DURABILITY FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ASTM D 6778 : 2014 : REDLINE | Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| TIA 455-189 : 1992(R2012) | OZONE EXPOSURE TEST FOR FIBER OPTIC COMPONENTS |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| TIA/EIA 455-4 : C2002(R2014) | FIBER OPTIC COMPONENT TEMPERATURE LIFE TEST |
| TIA/EIA 455-3 : B2009(R2014) | PROCEDURE TO MEASURE TEMPERATURE CYCLING EFFECTS ON OPTICAL FIBER UNITS, OPTICAL CABLE, AND OTHER PASSIVE FIBER COMPONENTS |
| TIA 455-107 : A1999 | DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET |
| TIA 455-64 : 1998(R2002) | PROCEDURE FOR MEASURING RADIATION-INDUCED ATTENUATION IN OPTICAL FIBERS AND OPTICAL CABLES |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| TIA 455-20 : B2004(R2013) | OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-STD-1678-1 Revision D:2016 | Fiber Optic Cabling Systems Requirements and Measurements (Part 1: Design, Installation and Maintenance Requirements) (Part 1 of 6 Parts) |
| SAE AMSQQA225B | Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
| MIL-DTL-55330 Revision C:2001 | Connectors, Electrical and Fiber Optic, Packaging of |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| TIA/EIA 455-5 : C2002 | HUMIDITY TEST PROCEDURE FOR FIBER OPTIC COMPONENTS |
| TIA/EIA 455-34 : A1995(R2002) | INTERCONNECTION DEVICE INSERTION LOSS TEST |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-1678-2 Revision A:2013 | Fiber Optic Cabling Systems Requirements and Measurements (Part 2: Optical Measurements) (Part 2 of 6 Parts) |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| TIA/EIA 455-32 : A1990(R2008) | FOTP-32 - FIBER OPTIC CIRCUIT DISCONTINUITIES |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| TIA 455-22 : B1993(R2012) | AMBIENT LIGHT SUSCEPTIBILITY OF FIBER OPTIC COMPONENTS |
| MIL-STD-1678-3 Revision C:2016 | Fiber Optic Cabling Systems Requirements and Measurements Physical, Mechanical, Environmental and Material Measurements (Part 3 of 6 Parts) |
| TIA 455-6 : B1992(R2012) | CABLE RETENTION TEST PROCEDURE FOR FIBER OPTIC CABLE INTERCONNECTING DEVICES |
| TIA 455-56 : C2009(R2017) | TEST METHOD FOR EVALUATING FUNGUS RESISTANCE OF OPTICAL FIBER AND CABLE |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.