MIL-HDBK-1250 Revision A:1995
Current
Current
The latest, up-to-date edition.
Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies (S/S by AS12500)
Available format(s)
PDF
Published date
18-08-1995
Publisher
€16.67
Excluding VAT
Establishes minimum requirements for procedures, materials and systems for protecting electronic components in DoD systems and assemblies from adverse environments.
| DevelopmentNote |
A NOTICE 1 - Notice of Inactivation for New Design. (11/2001) A NOTICE 2 - Notice of Validation but remains Inactive for New Design. (12/2006) A NOTICE 3 - Notice of Validation but remains Inactive for New Design. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
51
|
| ProductNote |
NEW CHILD NOT 4 2018 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This standard establishes minimum requirements for procedures, materials and systems for protecting electronic components in DoD systems and assemblies from adverse environments. Protective measures shall be sufficient to maintain performance characteristics within specified limits both during and after exposure to moisture, high and low temperatures, corrosive gases, chemicals and microbial (fungal) attack. This standard does not deal with protection against damage from stress, shock, vibration or nuclear, biological and chemical (NBC) contamination. It is not concerned with electrical or mechanical design except insofar as design details affect susceptibility to corrosion. Provisions for prevention of deterioration shall apply to housings, chassis, hardware and similar parts which are assembled into electronic equipment, as well as to electronic and electro-mechanical components. Unless specifically mentioned in the item specification or drawing, this standard does not apply to standard commercial equipment.
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| ADS-13F-HDBK : 1997 | AERONAUTICAL DESIGN STANDARD - HANDBOOK - AIR VEHICLE MATERIALS AND PROCESSES |
| MIL-PRF-85046 Revision A:2015 | Actuator, Linear, Electromechanical |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| MIL C 81309 : E | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
| SAE AMS2416L | Plating, Nickel-Cadmium Diffused |
| MIL-M-24041 Revision C:1981 | Molding and Potting Compound, Chemically Cured, Polyurethane |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
| SAE AMS2404G | Plating, Electroless Nickel |
| MIL L 6086 : D | LUBRICATING OIL, GEAR, PETROLEUM BASE |
| MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED, FOR AIRCRAFT STRUCTURES (S/S BY SAE-AMS-S-7124) |
| QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
| MIL-D-3464 Revision E:1987 | Desiccants, Activated, Bagged, Packaging Use and Static Dehumidification |
| MIL-T-23142 Revision B:1977 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR DISSIMILAR METAL SEPARATION (S/S BY A-A-59298) |
| DOD-STD-1866 Base Document:1968 | Soldering Process General (Non-Electrical) (No S/S Document) |
| MIL-W-18142 Revision C:1990 | Wood Preservative Solutions, Oil-Soluble, Ship and Boat Use (No S/S Document) |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET AND STRIP, POLYIMIDE (S/S BY ASTM-D5213) |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-P-45209 Revision B:1981 | Palladium Plating, Electrodeposited (S/S By ASTM-B679) |
| MIL-C-81562 Revision B:1983 | Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited) (S/S by SAE-AMS-C-81562) |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRICAL INSULATION: SHEETS, GLASS CLOTH, SILICONE RESIN (S/S BY MIL-I-24768/17) |
| MIL-P-46067 Revision B:1977 | Plastic Embedding Compound, Epoxy Resin System |
| MIL-V-173 Revision C:1969 | Varnish, Moisture-and-Fungus Resistant (for Treatment of Communications, Electronic, and Associated Equipment) User may Consult ASTM-D3955 and ASTM-D295) |
| MIL-P-79 Revision C:1961 | PLASTIC RODS AND TUBES, THERMOSETTING; LAMINATED (S/S BY MIL-I-24768/8, MIL-I-24768/10, MIL-I-24768/11, MIL-I-24768/12, MIL-I-24768/13, MIL-I-24768/14 & MIL-I-24768/16) |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-F-495 Revision E:1988 | FINISH CHEMICAL, BLACK FOR COPPER ALLOYS |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-R-46085 Revision B:1984 | Rhodium Plating, Electrodeposited |
| MIL-T-12879 Revision A:1966 | TREATMENTS, CHEMICAL, PREPAINT AND CORROSION INHIBITIVE, FOR ZINC SURFACES (S/S BY ASTM-D2092) |
| MIL-L-23398 Revision D:1985 | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749 |
| MIL-W-8939 Revision A:1990 | Welding, Resistance, Electronic Circuit Modules (S/S BY MIL-PRF-53095) |
| MIL S 13165 : C | SHOT PEENING OF METAL PARTS |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) (S/S BY SAE-AMS-QQ-C-320) |
| MIL-I-10 Revision B:1966 | Insulating Compound, Electrical, Ceramic, Class L (No S/S Document) |
| MIL-STD-838 Revision C:1983 | LUBRICATION OF MILITARY EQUIPMENT |
| MIL-T-10727 Revision C:1989 | TIN PLATING: ELECTRODEPOSITED OR HOT-DIPPED, FOR FERROUS AND NONFERROUS METALS (S/S BY ASTM-B545, ASTM-B339) |
| MIL-C-46168 Revision D:1987 | Coating, Aliphatic Polyurethane, Chemical Agent Resistant (See Notice 1 for Replacement Information) |
| MIL-M-24325 Base Document:1968 | Molding Material, Plastic, Epoxy Compounds Thermosetting (S/S by MIL-M-14) |
| MIL-P-19161 Revision A:1956 | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN (S/S BY MIL-I-24768/7) |
| QQ-S-365 Revision D:1985 | SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR (USERS MAY CONSULT ASTM-B700) |
| MIL L 15719 : A | LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS) |
| MIL-I-17563 Revision C:1992 | Impregnants for Cast of Powder Metal Components |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| MIL L 2105 : D | LUBRICATING OIL, GEAR, MULTI PURPOSE |
| MIL-STD-2219 Revision A:2005 | Fusion Welding for Aerospace Applications (S/S by AWS-D17.1) |
| MIL-STD-276 Revision A:1992 | Impregnation of Porous Metal Castings and Powdered Metal Components |
| MIL G 45204 : C | GOLD PLATING, ELECTRODEPOSITED |
| MIL-STD-2000 Revision A:1991 | STANDARD REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES (NO S/S DOCUMENT) |
| MIL-B-7883 Revision B:1968 | Brazing of Steels, Copper, Copper Alloys, Nickel Alloys, Aluminum and Aluminum Alloys (Future Acquisition should specify one AWS-C3.4, AWS-C3.5, AWS-C3.6 and AWS-C3.7) |
| SAE AMS2401J | Plating, Cadmium Low Hydrogen Content Deposit |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCTS (S/S BY ASTM-D2000) |
| MIL-P-25518 Revision B:1981 | Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated |
| MIL-P-23408 Revision B:1983 | Plating: Tin-Cadmium (Electrodeposited) |
| MIL-P-15037 Revision E:1965 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (S/S BY MIL-I-24768/1) |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS (NO S/S DOCUMENT) |
| MIL C 85054 : B | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, CLEAR (AMLGUARD) |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF (S/S BY MIL-STD-2073-1) |
| MIL-C-14550 Revision B:1983 | Copper Plating (Electrodeposited) (S/S by SAE-AMS2418) |
| MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD (ELECTRODEPOSITED (S/S BY SAE-AMS-P-81728) |
| MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
| MIL-W-6858 Revision D:1978 | WELDING, RESISTANCE: SPOT AND SEAM (S/S BY SAE-AMS-W-6858) |
| MIL-T-22361 Base Document:1960 | THREAD COMPOUND, ANTISEIZE, ZINC DUST-PETROLATUM (S/S BY A-A-59313) |
| MIL-T-12664 Revision B:1965 | TREATMENT, FUNGUS RESISTANT, PARANITROPHENOL, FOR CORK PRODUCTS (NO S/S DOCUMENT) |
| MIL C 26074 : E | COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
| MIL-P-46105 Base Document:1966 | PRIMER COATING, WELD-THROUGH, ZINC-RICH (S/S BY SSPC-PAINT30) |
| QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
| MIL C 83488 : C | COATING, ALUMINUM, ION VAPOR DEPOSITED |
| MIL-I-16923 Revision H:1991 | Insulating Compound, Electrical, Embedding, Epoxy (S/S by A-A-59877) |
| MIL-C-8837 Revision B:1983 | Coating, Cadmium (Vacuum Deposited) (S/S by SAE-AMS-C-8837) |
| L-P-516 Revision A:1967 | Plastic Sheet and Plastic Rod, Thermosetting, Cast |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE (GENERAL SPECIFICATION) (S/S BY A-A-59588) |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL G 81322 : E | GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395 |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-M-14 Revision H:1990 | Molding Compounds, Thermosetting (S/S by ASTM-D5948) |
| QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) (S/S BY SAE-AMS-QQ-N-290) |
| VV-L-800 Revision C:1983 | Lubricating Oil, General Purpose, Preservative, (Water-Displacing, Low Temperature) (S/S by MIL-PRF-32033) |
| MIL L 87177 : A | LUBRICANT, CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, SYNTHETIC |
| MIL-F-7179 Revision G:1993 | Finishes, Coatings, and Sealants for the Protection of Aerospace Weapons Systems (S/S by MIL-STD-7179) |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL-I-8574 Revision E:1982 | Inhibitors, Corrosion, Volatile, Utilization of |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.