MIL-PRF-81733 Revision D:1998
Current
The latest, up-to-date edition.
Sealing and Coating Compound, Corrosion Inhibitive
English
15-05-1998
Covers accelerated, room temperature curing synthetic rubber compounds used in the coating and sealing of metal components on aircraft systems and weapons for the protection of corrosion. The Class 1 sealing compound is effective over a continuous operating temperature range of -65 degrees to +250 degrees F. (-54 to +121 deg C). The Class 2 sealing compound is effective over a continuous operating temperature range of -80 degrees to +320 degrees F. (-62 to +160 deg C).
| DevelopmentNote |
SUPERSEDING MIL-S-81733
|
| DocumentType |
Standard
|
| Pages |
35
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers accelerated, room temperature curing synthetic rubber compounds used in the sealing and coating of metal components on weapons and aircraft systems for protection against corrosion. The Class 1 sealing compound is effective over a continuous operating temperature range of ¿65° to +250° F (¿54° to +121° C). The Class 2 sealing compound is effective over a continuous operating temperature range of ¿80° to +320° F (¿62° to +160° C).
| MIL-PRF-32405 Base Document:2013 | Cleaner, Hand Wipe, Metallic Substrates, Low or Exempt VOC and HAP Free |
| SAE AIR1594C | Plain Bearing Selection for Landing Gear Applications |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-DTL-32525 Base Document:2016 | Magazine, Portable (ShipBoard) |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| SAE AMS3265E | Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| SAE J2270_201606 | Ship Systems and Equipment - Threaded Fasteners - Inspection, Test, and Installation Guidance |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| SAE ARP1967B | Containers, Shipping and Storage, Reusable |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL-PRF-32295 Revision B:2017 | Cleaner, Non-Aqueous, Low-Voc, Hap-Free |
| MIL-PRF-32597 Base Document:2018 | Cleaner, Polymer and Polymer Matrix Composite (PMC) Material, Non-Aqueous, Hap-Free |
| MIL-DTL-18264 Revision E:2015 | Finishes, Organic, Weapons Systems, Application and Control of |
| MIL-DTL-2 Revision G:2006 | Valves, Cylinder, Gas (for Compressed or Liquefied Gases), General Specification for (S/S by A-A-59860) |
| MIL-DTL-27443 Revision F:2003 | Pallets, Cargo, Aircraft, Type HCU-6/E |
| NFPA 1150 : 2017 | FOAM CHEMICALS FOR FIRES IN CLASS A FUELS |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| SAE AMS3144 | Primer, Anodic Electrodeposition for Aircraft Applications |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE ARP4118A | Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair |
| NFPA 18A:2022 | Standard on Water Additives for Fire Control and Vapor Mitigation |
| NFPA 1150:2022 | Standard on Foam Chemicals for Fires in Class A Fuels |
| QQ-A-250-12 Revision F:1982 | Aluminum Alloy 7075, Plate and Sheet (See Notice 3 for Replacement Information) |
| MS24694 Revision C:1969 | Screw, Machine, Flat Countersunk Head, 100 Deg., Structural, Cross Recessed, UNC-3A and UNF-3A (S/S by NASM24694) |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| SAE AMS3819C | Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces |
| SAE AMS4376H | Plate, Magnesium Alloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-H26) Cold Rolled and Partially Annealed |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL-PRF-23377 Revision K:2012 | Primer Coatings: Epoxy, High-Solids |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-S-7839 Revision B:1973 | SCREW, STRUCTURAL, AIRCRAFT (S/S BY NASM7839) |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE (S/S BY SAE-AMS-T-9046) |
| MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
| A-A-58054 Base Document:1996 | Abrasive Mats, Non-Woven, Non-Metallic |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| CCC-C-419 Revision G:1989 | Cloth, Duck, Unbleached, Plied-Yarns, Army and Numbered (No S/S Document) |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| MIL-C-38736 Revision B Base Document:1984 | Cleaning Compound, Solvent Mixtures (Metric) (S/S by A-A-59281) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| SAE AMS2629E | Fluid, Jet Reference |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.