MIL-STD-163 Revision C:1978
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE
Available format(s)
PDF
Superseded date
19-02-2008
Superseded by
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.Gives requirements for materials, containers, methods and procedures for the packing, preservation and marking of steel mill products.
| Committee |
AREA PACK
|
| DevelopmentNote |
C NOTICE 1 - Notice of Change. C NOTICE 2 - Notice of Change. C NOTICE 3 - Notice of Cancellation without Replacement. C NOTICE 4 - Notice of Cancellation/Superseded by ASTM A 700. (02/2008)
|
| DocumentType |
Standard
|
| Pages |
126
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM A 135 : 2005 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 392 : 2011 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| MIL-S-62470 Base Document:1983 | STEEL, CHROME NICKEL MOLYBDENUM, 8620 BARS, FORGING AND TUBING BEARING QUALITY, VACUUM DEGASSED |
| MIL-W-21157 Revision A:1971 | WELDMENT, STEEL, CARBON AND LOW ALLOY (YIELD STRENGTH 3O,OOO - 6O,OOO PS1) |
| MIL S 17758 : A NOTICE 1 | STEEL BAR AND STEEL FORGING, NICKEL MODIFIED HADFIELD AND NICKEL-MOLYBDENUM MODIFIED HADFIELD |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| SAE AMST81556A | Titanium and Titanium Alloys, Extruded Bars and Shapes, Aircraft Quality |
| SAE AMS5546E | Steel Sheet and Strip, Corrosion and Moderate Heat Resistant 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Cold Rolled, Tempered |
| MIL-S-52836 Revision A:1974 | SUPPLEMENTARY SET, BRIDGE, TROOP SUPPORT, PACKAGING OF |
| SAE MAM5914A | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5ni 19cr 3.0mo 5.0cb 0.90ti 0.50al 18fe Consumable Electrode Or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated |
| MIL S 869 : C | STEEL BARS, BILLETS AND FORGINGS - ALLOY NITRIDING APPLICATION |
| ASTM A 623M : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements [Metric] |
| ASTM A 232/A232M : 2005 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| MIL S 81081 : A | STEEL; SHEET, CHROMIUM NICKEL MOLYBDENUM VANADIUM (FOR TORPEDO MARK 46 MOD O) |
| MIL-S-83030 Revision A:1968 | STEEL ALLOY, CARBURIZING, BARS AND BILLETS, STEEL NICKEL-CHROMIUM (3310, 3316, AND 9310), PREMIUM QUALITY |
| SAE AMS5625E | Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished |
| MIL S 861 : A | STEEL BARS, CORROSION RESISTING, NAVAL STEAM TURBINE PARTS US |
| QQ N 00286 : F | NICKEL-COPPER-ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| DOD-F-24669 Base Document:1986 | FORGINGS AND FORGING STOCK, STEEL BARS, BILLETS AND BLOOMS, GENERAL SPECIFICATION FOR (METRIC) |
| MIL S 645 : C | STRIP METAL, CARBON STEEL, COLD ROLLED, DRAWING QUALITY, SPECIAL KILLED [FOR AMMUNITION COMPONENTS] |
| MIL-S-8559 Revision A:1965 | STEEL BARS, CARBON, AISI [1095] AIRCRAFT QUALITY |
| QQ-S-626 Revision C:1976 | STEEL PLATE, ALLOY (STRUCTURAL QUALITY) |
| QQ-W-428 Revision B:1971 | WIRE, STEEL, CARBON HIGH CARBON, ROUND, FOR MECHANICAL SPRINGS, GENERAL PURPOSE |
| SAE AMS5624F | Steel Bars, High Expansion 4.5Mn - 4.0Cr - 12.5Ni (0.50 - 0.60C) Cold Finished |
| MIL-T-81556 Revision A:1983 | TITANIUM & TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| MIL-A-46099 Revision C:1987 | ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
| MIL-S-8844 Revision D:1987 | STEEL BAR, REFORGING STOCK AND MECHANICAL TUBING LOW ALLOY PREMIUM QUALITY |
| MIL R 122/3 : B NOTICE 1 | RESISTOR FIXED FILM PRECISION ESTABLISHED RELIABILITY STYLE RFP03 |
| SAE AMS6426F | Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode Vacuum Melted |
| SAE AMS5530H | Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 58Ni - 15.5Cr - 16Mo - 3.8W - 5.5Fe Solution Heat Treated |
| SAE AMS6521C | Steel Sheet, Strip, and Plate, Maraging, 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al, Consumable Electrode Melted, Solution Heat Treated |
| SAE AMS5550F | Alloy Sheet, Strip, and Plate, Corrosion and Heat Resistant 80Ni - 15.5Cr - 0.62Ti - 3.25Al Annealed |
| SAE AMS6443G | Steel Bars, Forgings, and Tubing, 1.0Cr (0.98 - 1.10C) (SAE 51100), Consumable Electrode Vacuum Melted |
| ASTM A 999/A999M : 2018 : REDLINE | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe |
| ASTM A 905 : 2004 : R2010 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| SAE AMS6524E | Steel, Sheet, Strip, and Plate 1.0cr 7.5ni 4.5co 1.0mo 0.09v (0.29-0.34c) Consumable Electrode Melted, Annealed |
| ASTM A 121 : 2013 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM A 511/A511M : 2016 : REDLINE | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar |
| ASTM A 752M : 2004 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] |
| ASTM A 600 : 1992 : REV A : R2010 | Standard Specification for Tool Steel High Speed |
| SAE AMS5537K | Cobalt Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated |
| ASTM A 230/A230M : 2005 : R2011 : EDT 1 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| MIL-P-13326 Revision D:1987 | PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES |
| MIL W 3314 : E | WIRE, IRON OR STEEL, GALVANIZED |
| SAE AMS7713C | Iron, Electrical, Bar and Strip Cold Finished, Annealed |
| MIL-S-860 Revision B:1966 | STEEL FORGING FOR STEAM TURBINE ROTORS |
| AASHTO M 203M/M 203 : 2012 | SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT |
| AASHTO M 334M/M 334 : 2017 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-R-52928 Base Document:1977 | RESERVOIR SYSTEM, FABRIC, COLLAPSIBLE, 25,000 BBL, PETROLEUM, PACKAGING OF |
| MIL-S-46889 Revision B:1985 | STEEL, SPRING, CHROMIUM NICKEL ALLOY |
| QQ-S-700 Revision D:1977 | STEEL SHEET AND STRIP, MEDIUM AND HIGH CARBON |
| QQ-F-461 Revision C:1968 | FLOOR PLATE, STEEL, ROLLED |
| QQ-W-461 Revision H:1978 | WIRE, STEEL, CARBON, ROUND, BARE AND COATED |
| MIL-S-8967 Base Document:1968 | STEEL BAR, WIRE, FORGING STOCK, FORGINGS, MECHANICAL TUBING [431] QUALITY |
| MIL A 13259 : B | ARMOR, STEEL: SHEET, STRIP, AND FABRICATED FORMS; ROLLED, NON-MAGNETIC; FOR HELMETS AND PERSONNEL ARMOR REQUIREMENTS |
| MIL-S-7108 Revision A:1955 | STEEL, ALLOY (MANGANESE SILICON NICKEL) BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) |
| ASTM A 525 : 1993 | Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994) |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| AASHTO M 322M/M 322 : 2010 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 856/A856M : 2003 : R2014 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 853 : 2004 | Standard Specification for Steel Wire, Carbon, for General Use |
| SAE AMST9046B | Titanium and Titanium Alloy, Sheet, Strip, and Plate |
| SAE AMS5672D | Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu Precipitation Hardenable, Spring Temper |
| SAE AMS6518C | Steel Sheet, Strip, and Plate, Maraging, 19ni 3.0mo 1.4ti 0.10al Double Vacuum Melted, Solution Heat Treated |
| ASTM A 600 : 1992 : REV A : R2016 | Standard Specification for Tool Steel High Speed |
| SAE AMS4575F | Nickel-Copper Alloy Tubing, Brazed, Corrosion Resistant 67 Ni - 31Cu Annealed |
| SAE MAM5536B | Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 47.5ni 22cr 1.5co 9.0mo 0.60w 18.5fe, Solution Heat Treated |
| SAE AMSW21425 | Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose) |
| ASTM F 1665 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM A 500 : 2003 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 853 : 2004 : R2010 | Standard Specification for Steel Wire, Carbon, for General Use |
| SAE MAM4911B | Titanium Alloy, Sheet, Strip, and Plate, 6al 4v, Annealed |
| ASTM A 519 : 2006 : R2012 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 623 : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements |
| ASTM A 519/A519M : 2017 : REDLINE | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 686 : 1992 : R2004 | Standard Specification for Tool Steel, Carbon |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1345 : 2010 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| ASTM F 1665 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM A 681 : 2008 : R2015 | Standard Specification for Tool Steels Alloy |
| ASTM A 793 : 1996 : R2009 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| ASTM A 905 : 2004 : R2017 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| SAE AMSS6758B | Steel, Chrome-Molybdenum (4130) Bars and Reforging Stock (Aircraft Quality) |
| MIL-T-5695 Revision D:1973 | TUBING, STEEL, CORROSION-RESISTANT (304), COLD DRAWN |
| SAE AMSF7190B | Forging, Steel, For Aircraft/Aerospace Equipment and Special Ordnance Applications |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-S-7720 Revision A:1967 | STEEL, CORROSION RESISTANT [18.8] BARS, WIRE AND FORGING STOCK [AIRCRAFT QUALITY] |
| MIL F 20138 : C | FLOOR PLATE, CORROSION RESISTANT STEEL, ROLLED |
| MIL W 8958 : NOTICE 1 | WIRE, STEEL, CORROSION RESISTANT HIGH STRENGTH [AM 355] |
| MIL S 8955 : 0 | STEEL PLATE, SHEET AND STRIP PH 15-7 MO CORROSION RESISTANT, PRECIPITATION HARDENING |
| ASTM A 878/A878M : 2017-09 | SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY |
| MIL-S-13281 Revision E:1985 | STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED) |
| MIL A 46186 : 0 | ARMOR PLATE, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL-S-11310 Revision E:1976 | Steel Bars, Carbon, Hot Rolled, For Cold Shaping Including Cold Extrusion |
| MIL S 24412 : NOTICE 1 | STEEL, SPECIAL STRUCTURAL SHAPE, WELDABLE, HIGH TENSILE (HT), FOR SUBMARINE HULLS |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| ASTM A 793 : 1996 : R2014 | Standard Specification for Rolled Floor Plate, Stainless Steel (Withdrawn 2023) |
| MIL T 18165 : B | TUBE AND PIPE, CHROMIUM MOLYBDENUM ALLOY STEEL, SEAMLESS |
| MIL-T-8606 Revision C:1973 | TUBING, STEEL, CORROSION RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON) |
| MIL-B-12504 Revision E:1987 | BAR, METAL AND WIRE (NONELECTRICAL), CARBON AND ALLOY STEEL, COLD DRAWN FOR AP BULLET CORES AND SHOT |
| MIL-S-980 Revision B:1965 | Steel, Chromium Alloy, Bars (for Torpedo Gyroscope Bearings) |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-C-23331 Base Document:1962 | CORES FOR SEARCH COIL ASSEMBLIES |
| MIL-S-16598 Revision B:1970 | Steel Bar (Low Expansion, Free Cutting, 36 Percent Nickel). |
| ASTM A 686 : 1992 : R2010 | Standard Specification for Tool Steel, Carbon |
| NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
| AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
| MIL S 3039 : C | STEEL, STRAP, HIGH CARBON, SPHEROIDIZED ANNEALED [FOR AMMUNITION CARTRIDGE CLIPS] |
| MIL C 24758 : 0 | CONDUIT, FLEXIBLE, WEATHERPROOF & ASSOCIATED FITTINGS |
| SAE AMSS11310B | Steel Bars, Carbon, Hot Rolled, for Cold Shaping, Including Cold Extrusion |
| MIL-S-6049 Revision A:1967 | STEEL, CHROME NICKEL MOLYBDENUM [8740] BARS, RODS AND FORGING STOCK FOR AIRCRAFT APPLICATION |
| MIL T 6735 : A | TUBING, CHROME-MOLYBDENUM, 4135 STEEL, SEAMLESS AIRCRAFT QUALITY |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
| NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| SAE AMS6520E | Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted, Solution Heat Treated |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| SAE AMS5036H | Steel Sheet and Strip, Aluminum Coated Low Carbon |
| SAE AMS5751F | Alloy Bars, Forgings, and Rings, Corrosion and Heat Resistant 54Ni - 17.5Cr - 16.5Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Solution, Stabilization, and Precipitation Heat Treated Consumable Electrode or Vacuum Induction Melted |
| ASTM A 797 : 1982 | Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988) |
| SAE AMSS7108B | Steel, Alloy (Manganese-Silicon-Nickel), Bars and Forging Stock (Aircraft Quality) |
| SAE AMS5549H | Steel, Corrosion and Heat Resistant, Plate 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated |
| SAE AMSI23011C | Iron-Nickel Alloys for Sealing to Glasses and Ceramic |
| ASTM A 21 : 1994 : R1999 | Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003) |
| ASTM A 681:2008 | Standard Specification for Tool Steels Alloy |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM A 686 : 1992 : R2016 | Standard Specification for Tool Steel, Carbon |
| ASTM A 1000 : 2005 | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality |
| ASTM A 491 : 2011 : R2017 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM A 600 : 1992 : REV A : R1999 | Standard Specification for Tool Steel High Speed |
| ASTM A 116 : 2011 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
| SAE AMSS6098A | Steel, Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (Aircraft Quality) |
| SAE AMST5066A | Tubing, Carbon Steel (1025), (Aircraft Quality) |
| QQ-T-580 Revision C:1977 | TOOL STEEL, CARBON AND CARBON VANADIUM |
| MIL-S-11207 Revision D:1966 | STEEL SHEETS, CORRUGATED, 2-1/2-INCH NOMINAL CORRUGATIONS, PAINTED OR UNPAINTED |
| QQ-T-570 Revision C:1977 | TOOL STEEL, ALLOY |
| MIL S 18728 : D | STEEL PLATE, SHEET, AND STRIP, ALLOY, 8630, AIRCRAFT QUALITY |
| MIL-W-8957 Revision A:1966 | Wire, Steel, Carbon High Strength |
| MIL-S-8840 Revision B:1965 | STEEL SHEET AND STRIP, CORROSION RESISTANT, PRECIPITATION HARDENING [AM 350 AND AM 355] PREMIUM QUALITY |
| WW-P-404 Revision D:1973 | PIPE, STEEL (SEAMLESS & WELDED, BLACK & ZINC COATED) (GALVANIZED) |
| MIL-S-27419 Base Document:1968 | STEEL BILLET, CORROSION RESISTANT, ANNEALED, PREMIUM QUALITY |
| SAE AMS5115J | Wire, Carbon Steel 0.60 - 0.75C Hardened and Tempered |
| AASHTO MP 18M/MP 18 : 1900 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| MIL-S-6050 Revision A:1967 | Steel, Chrome-Nickel-Molybdenum (8630) Bars and Reforging Stock (Aircraft Quality) |
| MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS AND REFORGING STOCK |
| MIL-S-24645 Revision A:1990 | STEEL PLATE, SHEET, OR COIL, AGE HARDENING ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HSLA 8O) |
| MIL-S-21156 Revision A:1975 | STEEL BARS, HEAT TREATED (FOR 2OMM AND 3OMM AIRCRAFT GUN BARRELS) |
| MIL S 866 : C | STEEL: BARS AND BILLETS (FOR CARBURIZING) |
| ASTM A 793 : 1996 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| MIL P 1144 : D NOTICE 1 | PIPE, CORROSION RESISTANT, STAINLESS STEEL, SEAMLESS OR WELDED |
| MIL-S-8503 Revision B:1978 | STEEL BARS, CHROME-VANADIUM (6150) AIRCRAFT QUALITY |
| SAE AMS4908G | Titanium Alloy Sheet and Strip 8mn Annealed, 110 Ksi (760 Mpa) Yield Strength |
| MIL-S-6098 Revision A:1967 | STEEL, CHROME-NICKEL-MOLYBDENUM [8735] BARS AND REFORGING STOCK [AIRCRAFT] |
| MIL-S-18729 Revision C:1965 | STEEL PLATE, SHEET, AND STRIP, ALLOY, 4130, AIRCRAFT QUALITY |
| ASTM A 232/A232M : 2005 : R2011 : EDT 1 | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire |
| MIL L 24055 : 0 | LINING, LEAD FOR STEEL PIPE |
| MIL-S-5626 Revision C:1968 | STEEL, CHROME MOLYBDENUM [4140] BARS, RODS, AND FORGING STOCK FOR AIRCRAFT APPLICATION |
| MIL M 46888 : A | MAGNET MATERIALS, PERMANENT |
| MIL S 47086 : 0 | STEEL, CHROMIUM VANADIUM ALLOY |
| MIL A 46193 : 0 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL-T-8887 Base Document:1987 | TUBING, STEEL, CORROSION RESISTANT, HEAT RESISTANT, STABILIZED, WELDED THIN WALL [ASG] |
| AASHTO M 281 : 1996 | SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT |
| ASTM A 554 : 2016 : REDLINE | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| MIL-S-46047 Revision E:1988 | STEEL, BARS AND BLANKS (1-3/4 INCHES AND OVER IN DIAMETER) FOR BARRELS OF SMALL ARMS WEAPONS |
| ASTM A 795/A795M : 2013 : REDLINE | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| AASHTO M 31M/M 31 : 2015 | STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT |
| SAE AMSS6050B | Steel, Chrome-Nickel-Molybdenum (8630) Bars and Reforging Stock (Aircraft Quality) |
| AASHTO M 279 : 2014 | SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC |
| SAE AMS5852D | Nickel Alloy, Corrosion and Heat Resistant, Billets and Preforms 55ni 15cr 17co 5.0mo 3.5ti 4.0al 0.025b, Powder Metallurgy Product, Hot Isostatically Pressed |
| ASTM A 702 : 2013-11 | SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT |
| ASTM A 686 : 1992 : R1999 | Standard Specification for Tool Steel, Carbon |
| ASTM F 1345 : 2010 : REV A | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 856/A856M : 2003 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 752M : 2004 : R2010 | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric] (Withdrawn 2011) |
| MIL S 17759 : B NOTICE 1 | STEEL BAR, BILLET, FORGING AND WIRE - CHROMIUM NICKEL PHOSPHORUS AND CHROMIUM NICKEL MANGANESE PHOSPHORUS ALLOY, LOW MAGNETIC PERMEABILITY |
| MIL-S-21946 Revision A:1972 | STEEL, WROUGHT, MANGANESE - NICKEL, AUSTENITIC (LOW MAGNETIC PERMEABILITY) |
| MIL-N-47037 Base Document:1974 | NICKEL ALLOY, HIGH PERMEABILITY, SHIELDING GRADE |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| MIL-S-48403 Base Document:1973 | STEEL SHEET, HOT-DIP, ZINC-COATED (GALVANIZED), MINIMIZED SPANGEL, FOR AUTOMOTIVE VEHICLE BODY USE |
| ASTM A 682/A682M : 2005 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009) |
| MIL N 81191 : A | NICKEL-TITANIUM ALLOYS, LOW MAGNETIC EFFECTS, BARS, PLATES, SHEETS, STRIPS, AND SHAPES (FOR SPECIAL PURPOSE TOOLS AND EQUIPMENT) |
| MIL-T-16343 Revision C:1968 | TUBING, STEEL, CARBON, STRUCTURAL |
| MIL-C-24615 Revision A:1988 | CASTING, NICKEL CHROMIUM MOLYBDENUM COLUMBIUM ALLOY |
| MIL-T-8506 Revision A:1966 | TUBING, STEEL, CORROSION-RESISTANT (304) ANNEALED SEAMLESS AND WELDED |
| SAE AMSQQW428B | Wire, Steel, Carbon (High Carbon, Round, For Mechanical Springs, General Purpose) |
| SAE AMS6342K | Steel Bars, Forgings, and Tubing 0.80Cr - 1.0Ni - 0.25Mo (0.38 - 0.43C) (SAE 9840) |
| MIL-S-8690 Revision B:1978 | STEEL, CHROME NICKEL MOLYBDENUM 8620, BARS AIRCRAFT QUALITY |
| SAE MAM5706C | Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, and Rings 57Ni 19.5Cr 13.5Co 4.3Mo 3.0Ti 1.4Al 0.006B 0.05Zr, Consumable Electrode or Vacuum Induction Melted, 995 to 1040°C Solution Heat Treated |
| ASTM A 500 : 2003 : REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| MIL-S-24512 Base Document:1975 | STEEL FORGINGS, ALLOY, STRUCTURAL, HIGH YIELD STRENGTH (HY-13O) |
| SAE AMS7817B | Molybdenum Alloy Sheet, Strip, and Plate, 0.48ti 0.090zr 0.02c, Arc Cast, Stress Relieved |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| QQ-S-763 Revision F:1996 | STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT |
| MIL-T-6736 Revision B:1965 | TUBING, CHROME MOLYBDENUM 4130 STEEL, SEAMLESS, AIRCRAFT QUALITY [ASG] |
| QQ-T-425 Revision B:1976 | TINPLATE, ELECTROLYTIC |
| SAE AMS7898D | Tungsten Sheet, Strip, Plate, and Foil, Pressed, Sintered, and Wrought |
| MIL-S-6709 Revision A:1965 | STEEL, CHROME-MOLYBDENUM-ALUMINUM; BARS, RODS, BILLETS AND FORGING STOCK (FOR NITRIDING) (AIRCRAFT QUALITY) |
| SAE MAM6304B | Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing, 0.95cr 0.55mo 0.30v (0.40-0.50c) |
| MIL-W-19487 Revision A:1975 | WIRE, NICKEL BASE ALLOY, AGE HARDENABLE |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| MIL-F-7190 Revision B:1985 | FORGING, STEEL, FOR AIRCRAFT AND AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS |
| ASTM A 392 : 2011 : REV A : R2017 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| MIL-S-8699 Revision A:1957 | STEEL BARS AND FORGING STOCK [4330] VANADIUM MODIFIED, AIRCRAFT QUALITY |
| MIL-S-7420 Revision B:1958 | STEEL BARS, ALLOY, CHROMIUM HIGH CARBON E 52100 [AIRCRAFT QUALITY] |
| MIL-I-23011 Revision C:1974 | IRON-NICKEL ALLOYS FOR SEALING TO GLASS AND CERAMICS |
| QQ-W-470 Revision B:1965 | WIRE, STEEL, CARBON, SPRING, MUSIC. |
| MIL-S-83135 Base Document:1968 | STEEL BARS, REFORGING STOCK, AND MECHANICAL TUBING, 4340M, HIGH QUALITY |
| MIL-T-24766 Base Document:1992 | TITANIUM FORGINGS & FORGING STOCK, HIGH QUALITY FOR SHIPS SERVICE |
| MIL-W-21425 Revision B:1975 | Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose) |
| MIL-S-18732 Revision D:1968 | Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality |
| ASTM A 617/A617M : 1996 | SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 116 : 2011 : R2016 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| AASHTO M 322M/M 322 : 2010 : R2015 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| SAE AMS6442G | Steel Bars and Forgings 0.50cr (0.98-1.10c) (SAE 50100) for Bearing Applications |
| ASTM A 511 : 2004 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| ASTM A 905 : 2004 | Standard Specification for Steel Wire, Pressure Vessel Winding |
| ASTM A 392 : 2011 : REV A | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| ASTM A 500/A500M : 2018 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A 530/A530M : 2012-06 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE |
| ASTM A 230/A230M : 2005 | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality |
| ASTM A 853 : 2004 : R2017 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM A 793 : 1996 : R2001 | Standard Specification for Rolled Floor Plate, Stainless Steel |
| ASTM A 856/A856M : 2003 : R2009 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 519 : 2006 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM A 864/A864M : 1990 | Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997) |
| ASTM A 600 : 1992 : REV A : R2004 | Standard Specification for Tool Steel High Speed |
| ASTM F 1345 : 2010 : REV A : R2015 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM A 491 : 2011 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| PPP-T-97 Revision D:1970 | TAPE, PRESSURE SENSITIVE ADHESIVE, FILAMENT REINFORCED |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING, AND WATERPROOFING, WITH APPROPRIATE TEST METHODS |
| MIL P 3420 : F | PACKAGING MATERIALS, VOLATILE CORROSION INHIBITOR, TREATED, OPAQUE |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS |
| MIL-C-52950 Revision A:1991 | CRATE, WOOD OPEN & COVERED |
| ASTM A 700 : 2014 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
| FED-STD-101 Revision C:1980 | TEST PROCEDURES FOR PACKAGING MATERIALS |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| MIL-B-52489 Revision E:1987 | BARBED TAPE, CONCERTINA |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| NN-P-530 Revision E:1977 | PLYWOOD, FLAT PANEL |
| VV-L-800 Revision C:1983 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.