NASA KSC E 165 : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
Superseded date
01-08-2024
Superseded by
Published date
01-01-2009
Sorry this product is not available in your region.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
Describes parts, materials, and processes used in the fabrication, maintenance, repair, and procurement of electrical and electronic control and monitoring equipment associated with ground support equipment (GSE) at the John F. Kennedy Space Center (KSC).
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA KSC STD Z 0007 : 1973 | DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| NASA KSC W 167 : 1994 | WIRING PROGRAMMING SYSTEM PATCHBOARDS, SPECIFICATION FOR |
| NASA KSC STD E 0004 : 2008 | PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| SAE AMSI7444A | Insulation Sleeving, Electrical, Flexible |
| MS21981 Revision D:1982 | FERRULE, INNER, UNINSULATED, SHIELD TERMINATING, TYPE 1 TWO PIECE, CLASS 1, FOR SHIELDED CABLE |
| SAE AMSDTL23053/5A | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked |
| QPL AS 50151 : 20171003 | QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - SAE-AS50151 - CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
| SAE AS83519C | Shield Termination, Solder Style, Insulated, Heat-Shrinkable, Environment Resistant General Specification For |
| MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
| IPC 6011 : 0 | GENERIC PERFORMANCE SPECIFICATION FOR PRINTED BOARDS |
| MS27466 Revision K:2012 | CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, CRIMP TYPE, BAYONET COUPLING, SERIES 1 |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| NASA STD 8739.5 : 2015 | WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION |
| MIL-DTL-55302 Revision G:2009 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES |
| NASA KSC SPEC E 0031 : 2008 | CABLES, ELECTRICAL, SPECIFICATION FOR |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| NASA STD 8739.1 : 2016 | WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES |
| NAS1744:2014 | SPLICE, CONDUCTOR, SOLDER STYLE, HOT AIR OR INFRARED, SHRINKABLE, INSULATED, IMMERSION RESISTANT |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-W-81822 Revision A:1982 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| IPC J STD 001 : F | REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
| NASA KSC SPEC E 0024 : 2008 | CABLE, ELECTRICAL, SHIELDED, JACKETED, FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR |
| TIA 440 : C2017 | FIBER OPTIC TERMINOLOGY |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| UL 444:5ED 2017-01-20 | Communications Cables |
| MS21980 Revision E:1982 | FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE 1 TWO PIECE, CLASS 1, FOR SHIELDED CABLE |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| NASA KSC NE 9187 : 2008 | SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| SAE AS 25036 : 2015 | TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TYPE 2, CLASS 1, (FOR 105 DEGREES C TOTAL CONDUCTOR TEMPERATURE) |
| SAE AMSQQA250/11 | Aluminum Alloy 6061, Plate and Sheet |
| IPC WHMA A 620 : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| IEC 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| IPC HDBK 001 : E | HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001 |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| NEMA VE 2 : 2013 | CABLE TRAY INSTALLATION GUIDELINES |
| TIA 455-133 : A2003(R2013) | OPTICAL FIBRES - PART 1-22: MEASUREMENT METHODS AND TEST PROCEDURES - LENGTH MEASUREMENT |
| NASM33540:2003 | SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| C22.2 NO. 214-17 | Communications cables (Bi-national standard, with UL 444) |
| A-A-59298 Revision B:2013 | Tape, Pressure-Sensitive Adhesive |
| IEC 60715:2017 | Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for mechanical support of switchgear, controlgear and accessories |
| CFR 40(PTS260-299) : JUL 96 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA STD 8739.4 : 2016 | WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| NASA KSC SPEC E 0017 : 1996 | ELECTRICAL POWER CABLE, INSTALLATION OF, SPECIFICATION FOR |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| SAE AMS2518D | Thread Compound, Anti-Seize, Graphite-Petrolatum |
| SAE AS81714B | Terminal Junction System (TJS), Environment Resistant General Specification For |
| SSPC-AB 1 : 2015 | MINERAL AND SLAG ABRASIVES |
| MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| NASA KSC STD E 0002 : 2009 | HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| NASA KSC SPEC Z 0005 : 1995 | BRAZING - STEEL, COPPER, ALUMINIUM, NICKEL, AND MAGNESIUM ALLOYS, SPECIFICATION FOR |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
| NEMA WC 66 : 2013 | STANDARD FOR CATEGORY 6 AND 6A, 100 OHM, INDIVIDUALLY UNSHIELDED TWISTED PAIRS, INDOOR CABLES (WITH OR WITHOUT AN OVERALL SHIELD) FOR USE IN LAN COMMUNICATION WIRING SYSTEMS |
| SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| SAE AMSI23053/2 | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYVINYL CHLORIDE, FLEXIBLE, CROSSLINKED AND NON-CROSSLINKED |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASA KSC STD E 0015 : 1992 | MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| SAE AMSDTL23053 | Insulation Sleeving, Electrical, Heat Shrinkable, General Specification For |
| NASM 35333 : 2003 | WASHER, LOCK, FLAT, INTERNAL TOOTH |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| SAE AS27212A | TERMINAL BOARD ASSEMBLY, MOLDED-IN-STUD, ELECTRIC |
| A-A-59125 Revision B:2012 | Terminal Boards, Molded, Barrier Screw and Stud Types and Associated Accessories |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| SAE AMS2695E | Connections, Electrical Solderless, Wire-Wrapped |
| NASA KSC STD E 0010 : 1994 | SOLDERING OF ELECTRICAL CONNECTIONS (HAND OR MACHINE), STANDARD FOR |
| IPC 7711/21 : B | REWORK, MODIFICATION AND REPAIR OF ELECTRONIC ASSEMBLIES |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| QPL 46058 : 20171031 | QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - MIL-I-46058 - INSULATING COMPOUND, ELECTRICAL (FOR COATING PRINTED CIRCUIT ASSEMBLIES) |
| SAE AMSDTL23053/1A | Insulation Sleeving, Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible |
| NASA MSFC STD 156 : 1962 | RIVETING, FABRICATING AND INSPECTION, STANDARD FOR |
| SAE AMSDTL23053/15A | Insulation Sleeving, Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, Outer Wall Crosslinked |
| NASA SPEC 5004 : 0 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| SAE AS21608A | Ferrule, Shield Terminating, Crimp Style |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| A-A-59126 Revision B:2012 | Terminals, Feedthru (Insulated) and Terminals, Stud (Insulated and Noninsulated) |
| SSPC-SP 5 : 2015 | WHITE METAL BLAST CLEANING |
| TIA 455-78 : B2002 | FOTP-78 - IEC 60793-1-40 - OPTICAL FIBRES - PART 1-40: MEASUREMENT METHODS AND TEXT PROCEDURES - ATTENUATION |
| NASA KSC STD E 0021 : 2002 | KSC TELECOMMUNICATION PREMISES DISTRIBUTION SYSTEMS, DESIGN OF, STANDARD FOR |
| NEMA WC 63.1:2005 | Performance Standard for Twisted Pair Premise Voice and Data Communications Cables |
| A-A-59569 Revision C:2009 | BRAID, WIRE (COPPER, TIN-COATED, SILVER-COATED, OR NICKEL COATED, TUBULAR OR FLAT) |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| SAE AS81824/1A | SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 °C), 1 × 1 SEALANT OPENING |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| A-A-59551 Revision A:2009 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| IPC 6012 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR RIGID PRINTED BOARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.