NF EN 12418 : 2000 + A1 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY
09-01-2023
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Liste des phénomènes dangereux significatifs
5 Prescriptions et/ou mesures de sécurité
5.1 Risques mécaniques
5.2 Risques électriques
5.3 Risques thermiques
5.4 Fumées (et gaz) d'échappement
5.5 Réservoirs contenant des liquides
5.6 Protection contre les projections d'eau
5.7 Vitesse de rotation
5.8 Bruit
5.9 Entretien
6 Vérification des prescriptions et/ou mesures de
sécurité
7 Informations pour l'utilisation
7.1 Marquage
7.2 Documents d'accompagnement
Annexe A (normative) Code d'essai de mesure du
bruit - Classe 2 de précision
Annexe B (normative) Dimensions des flasques pour
les disques diamant
Annexe C (normative) Résistance des protecteurs - État
de la technique relative aux caractéristiques
de protecteurs utilisés avec des disques à
tronçonner
Annexe D (normative) Pictogrammes
Annexe E (normative) Controle des températures de surface
Annexe F (normative) Code d'essai de vibrations
Annexe ZA (informative) Relation entre la présente Norme
européenne et les exigences essentielles de
la Directive UE 98/37/CE, amendée par la
98/79/CE
Annexe ZB (informative) Relation entre la présente Norme
européenne et les exigences essentielles de
la Directive UE 2006/42/CE
Bibliographie
Applicable to transportable masonry and stone cutting-off building construction for cutting-off stones, other mineral construction materials and composite materials haveing at least one supporting surface. Electrical or internal combustion prime motor provides the power for the tool rotation. Deals with significant hazards pertinent to masonry and stone cutting-off machines for job site (see Clause 4), when they are used as intended and under the conditions foreseen by the manufacturer and defines appropriate technical measures to eliminate or reduce risks arising from these hazards. Designed for use with rotating diamond cutting-off wheels with a continuous rim and/or segmented rim.
| DevelopmentNote |
Indice de classement: E65-402. Supersedes NFS 65 402. (10/2000) 2000 Edition Re-issued in August 2009 & incorporates AMD 1 2009. (08/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 12418:2010-03 | Identical |
| UNI EN 12418 : 2009 | Identical |
| I.S. EN 12418:2000 | Identical |
| BS EN 12418 : 2000 | Identical |
| NEN EN 12418 : 2000 + A1 2009 | Identical |
| UNE-EN 12418:2001 | Identical |
| SN EN 12418 : 2000 + A1 2009 | Identical |
| NBN EN 12418 : 2000 + A1 2009 | Identical |
| EN 12418:2000+A1:2009 | Identical |
| NS EN 12418 : 2000 + A1 2009 | Identical |
| ONORM EN 12418 : 2009 | Identical |
| NF EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| NF EN ISO 12100-1 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
| NF EN 60204-1 : 2006 AMD 1 2009 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 3744 : 2012 | ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
| NF EN 60335-2-41 : 2005 AMD 2 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
| NF EN ISO 20643 : 2008 AMD 1 2012 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION |
| NF EN ISO 5349-2 : 2001 AMD 1 2015 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT IN THE WORKPLACE |
| NFE 90 152 : 83 FD | MECHANICAL VIBRATIONS AND SHOCKS - MECHANICAL MOUNTING OF ACCELEROMETERS |
| IEC 61029-2-7:1993 | Safety of transportable motor-operated electric tools - Part 2: Particular requirements for diamond saws with water supply |
| FD ISO 7000 : 2004 FD | SYMBOLES GRAPHIQUES UTILISABLES SUR LE MATERIEL - INDEX ET TABLEAU SYNOPTIQUE |
| NF EN 60335-1 : 2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 11201 : 2010 | ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS |
| NF EN 12096 : 1997 | MECHANICAL VIBRATION - DECLARATION AND VERIFICATION OF VIBRATION EMISSION VALUES |
| NF EN 13218 : 2002 + A1 2008 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| NF EN ISO 8041 : 2005 | HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| NF EN ISO 13732-1 : 2008 | ERGONOMICS OF THE THERMAL ENVIRONMENT - METHODS FOR THE ASSESSMENT OF HUMAN RESPONSES TO CONTACT WITH SURFACES - PART 1: HOT SURFACES |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 12100-2 : 2004 AMD 1 2009 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
| NF EN 953 : 1997 + A1 2009 | SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.