NF EN 22768-1 : 1993
Current
The latest, up-to-date edition.
GENERAL TOLERANCES - PART 1: TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
12-01-2013
Cooperating organizations
National foreword
Foreword
Introduction
Specification
1 Scope
2 General
3 Normative references
4 General tolerances
5 Indications on drawings
6 Rejection
Annexes
A (informative) Concepts behind general tolerancing of
linear and angular dimensions
ZA (normative) Normative references to international
publications with their relevant European
publications
Tables
1 Permissible deviations for linear dimensions except
for broken edges
2 Permissible deviations for broken edges
3 Permissible deviations of angular dimensions
National annexes
NA (informative) Committees responsible
NB (informative) Cross-reference
Simplifies drawing indications and specifies general tolerances for linear and angular dimensions without individual tolerance indications in four tolerance classes. Only applies for the following dimensions that do not have an individual tolerance indication: linear and angular dimensions produced by machining assembled parts; linear dimensions; angular dimensions including angular dimensions usually not indicated.
| DevelopmentNote |
INDICE DE CLASSEMENT: E02-350-1
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 22768-1:1994 | Identical |
| ISO 2768-1:1989 | Identical |
| EN 22768-1:1993 | Identical |
| UNI EN 22768-1 : 1996 | Identical |
| BS EN 22768-1:1993 | Identical |
| NF ISO 16915 : 2004 | TOOLS FOR MOULDING - SPRUE PULLERS |
| NFE 63 072 : 2010 | TOOLS FOR PRESSING - GUIDE PILLAR MOUNTINGS FOR GLIDING GUIDING |
| NFE 63 108 : 2008 | TOOLS FOR PRESSING - SQUARE RETAINERS AND BACKING PLATES FOR FLANGED PUNCHES - BOTTOM FIXING |
| NF ISO 10072 : 2004 | TOOLS FOR MOULDING - SPRUE BUSHES - DIMENSIONS |
| NFE 63 060 : 2006 | TOOLS FOR PRESSING - WEAR PLATES - GENERAL SPECIFICATIONS |
| NFE 63 075 : 2010 | TOOLS FOR PRESSING - GUIDE PILLAR MOUNTINGS WITH FITTED-IN RINGS FOR GLIDING GUIDING |
| NF ISO 8020 : 2002 | TOOLS FOR PRESSING - PUNCHES WITH CYLINDRICAL HEAD AND STRAIGHT OR REDUCED SHANK |
| FD U10 002-1 : 2007 FD | AGRICULTURAL AND FORESTRY VEHICLES - IDENTIFICATION AND SIGNALLING - PART 1: DEFINITION AND IMPLANTATION OF IDENTIFICATION AND SIGNALLING COMPONENTS |
| NF EN 15272-3 : 2008 | INLAND NAVIGATION VESSELS - EQUIPMENT FOR ROPE LEADING - PART 3: ROLLER FAIRLEADS |
| NF ISO 10071-1 : 2009 | TOOLS FOR PRESSING - BALL-LOCK PUNCHES - PART 1: BALL-LOCK PUNCHES FOR LIGHT DUTY |
| NF ISO 7388-2 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS J, JD AND JF |
| NF ISO 6489-2 : 2002 | AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 2: SPECIFICATIONS FOR CLEVIS COUPLING 40 |
| NF ISO 10889-8 : 1998 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 8: TYPE Z, ACCESSORIES |
| NF ISO 15488 : 2004 | COLLETS WITH 8 DEGREES SETTING ANGLE FOR TOOL SHANKS - COLLETS, NUTS AND FITTING DIMENSIONS |
| NF ISO 8526-1 : 2006 | MODULAR UNITS FOR MACHINE TOOLS - WORKHOLDING PALLETS - PART 1: WORKHOLDING PALLETS UP TO 800 MM NOMINAL SIZE |
| NFE 66 239 : 2006 | INSERTED TOOTH CUTTERS WITH 7/24 TAPER SHANK |
| NFE 73 150 : 2010 | GASPIPE PLIERS - DIMENSIONS AND DESIGNATION |
| NFE 71 016 : 2007 | HAMMERS WITH STEEL HEADS - DIMENSIONS |
| NFE 63 107 : 2008 | TOOLS FOR PRESSING - RECTANGULAR RETAINERS AND BACKING PLATES FOR FLANGED PUNCHES - BOTTOM FIXING |
| NFE 62 528 : 2010 | REDUCTION SLEEVES WITH EXTERNAL 7/24 TAPER FOR TOOLS WITH TANGED MORSE TAPER SHANKS |
| NFE 15 034 : 2000 | INDUSTRIAL PRESSURE GAUGES - METALLIC PRESSURE GAUGE INDICATORS - DIFFERENTIAL GAUGES |
| NF ISO 26622-2 : 2009 | MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 2: DIMENSIONS AND DESIGNATION OF RECEIVERS |
| NF ISO 7388-1 : 2007 | TOOL SHANKS WITH 7/24 TAPER FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS OF FORMS A, AD, AF, U, UD AND UF |
| NFE 63 123 : 2010 | PRESS TOOLING - GUIDE BUSHING - SHOULDERED CLAMPING AND SHOULDERED THREADED BUSHES |
| NFE 63 117 : 2008 | TOOLS FOR PRESSING - RETAINERS FOR FLANGED PUNCHES - REDUCED RETAINERS |
| NF ISO 5692-2 : 2002 | AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET |
| NFF 19 201 : 2012 | RAILWAY ROLLING STOCK - PAINT MATERIALS AND MARKS - GENERAL INSTRUCTIONS AND TESTS METHOD |
| NF ISO 3937-2 : 2009 | CUTTER ARBORS WITH TENON DRIVE - PART 2: DIMENSIONS OF 7/24 TAPER |
| NF ISO 3937-3 : 2009 | CUTTER ARBORS WITH TENON DRIVE - PART 3: DIMENSIONS OF HOLLOW TAPER INTERFACE WITH FLANGE CONTACT SURFACE |
| NF EN 50336 : 2003 | BUSHINGS FOR TRANSFORMERS AND REACTOR CABLE BOXES NOT EXCEEDING 36 KV |
| NF ISO 17874-4 : 2006 | REMOTE HANDLING DEVICES FOR RADIOACTIVE MATERIALS - PART 4: POWER MANIPULATORS |
| NF ISO 6752 : 2008 | TOOLS FOR PRESSING - ROUND PUNCHES WITH 60 DEGREES CONICAL HEAD AND STRAIGHT SHANK |
| NF ISO 839-1 : 2007 | MILLING MACHINE ARBORS WITH 7/24 TAPERS - PART 1: DIMENSIONS AND DESIGNATION |
| NFE 63 073 : 2010 | TOOLS FOR PRESSING - GUIDE PILLAR MOUNTINGS WITH SELF-OILING RINGS FOR GLIDING GUIDING |
| NFE 48 401 : 2016 | HYDRAULIC FLUID POWER - TWO-, THREE- AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH ISO 725 (UN AND UNF) THREADS |
| NFE 02 353 : 2001 | GEOMETRICAL PRODUCTS SPECIFICATION (GPS) - CHASED PARTS - DIMENSIONAL AND SURFACE EVENNESS TOLERANCES FOR DIMENSIONS AND PARTS WITHOUT INDIVIDUAL TOLERANCES |
| NF EN 12726 : 2000 | PACKAGING - CORK MOUTH FINISH WITH A BORE DIAMETER OF 18,5 MM FOR CORKS AND TAMPER EVIDENT CAPSULES |
| NF ISO 2336-2 : 2006 | HACKSAW BLADES - PART 2: DIMENSIONS FOR MACHINE BLADES |
| NF ISO 2780 : 2007 | MILLING CUTTERS WITH TENON DRIVE - INTERCHANGEABILITY DIMENSIONS WITH CUTTER ARBORS - METRIC SERIES |
| NF ISO 10889-1 : 2005 | TOOL HOLDERS WITH CYLINDRICAL SHANK - PART 1: CYLINDRICAL SHANK, LOCATION BORE - TECHNICAL DELIVERY CONDITIONS |
| NF ISO 3937-1 : 2009 | CUTTER ARBORS WITH TENON DRIVE - PART 1: DIMENSIONS OF MORSE TAPER |
| NFS 61 112 : 2017 | FIRE-FIGHTING HOSES - FLEXIBLE DELIVERY HOSES OF DIAMETERS 25 - 45 - 70 - 110 - 152 |
| NF ISO 16366 : 2008 | TOOLS FOR PRESSING - L-SHAPED GUIDES |
| NF ISO 5415 : 2008 | REDUCTION SLEEVES WITH 7/24 EXTERNAL AND MORSE INTERNAL TAPER AND INCORPORATED SCREW |
| NF ISO 16367 : 2008 | TOOLS FOR PRESSING - GUIDE PLATES - U- AND V-BLOCKS |
| NFE 63 109 : 2006 | TOOLS FOR PRESSING - ROUND PUNCHES WITH 60 DEGREES CONICAL HEAD AND STRAIGHT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.