NF EN ISO 4288 : 1998
Current
The latest, up-to-date edition.
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
12-01-2013
1 Scope
2 Normative references
3 Definitions
4 Parameter estimation
4.1 Parameters defined over the sampling length
4.2 Parameters defined over the evaluation length
4.3 Curves and related parameters
4.4 Default evaluation lengths
5 Rules for comparison of the measured values with the
tolerance limits
5.1 Areas on the feature to be inspected
5.2 The 16% rule
5.3 The max.-rule
5.4 Uncertainty of measurement
6 Parameter evaluation
6.1 General
6.2 Roughness profile parameters
7 Rules and procedures for inspection using stylus
instruments
7.1 Basic rules for the determination of cut-off
wavelength for the measurement of roughness
profile parameters
7.2 Measurement of roughness profile parameters
Defines rules for comparing the measured values with the tolerance limits for surface texture parameters specified in ISO 4287, 12085, 13565-2 and 13565-3.
| DevelopmentNote |
REPLACES NFE 05-054
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| I.S. EN ISO 4288:1998 | Identical |
| EN ISO 4288:1997 | Identical |
| ONORM EN ISO 4288 : 1998 | Identical |
| BS EN ISO 4288:1998 | Identical |
| UNE-EN ISO 4288:1998 | Identical |
| NS EN ISO 4288 : 1ED 1998 | Identical |
| DIN EN ISO 4288:1998-04 | Identical |
| UNI EN ISO 4288 : 2000 | Identical |
| NF ISO 14881 : 2004 | |
| NF ISO 15407-2 : 2003 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES, SIZES 18 MM AND 26 MM - PART 2: MOUNTING INTERFACES WITH OPTIONAL ELECTRICAL CONNECTOR |
| NFP 95 101 : 2017 | ENGINEERING STRUCTURES - REPAIR AND STRENGTHENING OF CONCRETE AND MASONRY CONSTRUCTIONS - CONSOLIDATION OF THE DETERIORATED CONCRETE SKIN - SPECIFICATION PERTAINING TO THE TECHNIQUE AND THE MATERIALS USED |
| NF ISO 5599-1 : 2002 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 1: MOUNTING INTERFACES WITHOUT ELECTRICAL CONNECTOR |
| NFE 05 059-1 : 2003 | GEOMETRICAL PRODUCTS SPECIFICATION (GPS) - ACCEPTANCE TESTS AND REVIVIFICATION TESTS OF PROFILE MEASURING INSTRUMENTS - PART 1: MEASURING INSTRUMENTS FOR AREA SURFACE TEXTURE |
| NF EN ISO 15324 : 2008 | CORROSION OF METALS AND ALLOYS - EVALUATION OF STRESS CORROSION CRACKING BY THE DROP EVAPORATION TEST |
| NF EN 1999-1-3 : 2007 AMD 1 2012 | EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-3: STRUCTURES SUSCEPTIBLE TO FATIGUE |
| NF EN 1999-1-1 : 2007 AMD 2 2014 | EUROCODE 9 - DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES |
| NF EN 1672-2 : 2005 + A1 2009 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| NF EN 12020-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUDED PRECISION PROFILES IN ALLOYS EN AW-6060 AND EN AW-6063 - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| NF ISO 6336-1 : 2006 | CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 1: BASIC PRINCIPLES, INTRODUCTION AND GENERAL INFLUENCE FACTORS |
| NF ENV ISO 14253-2 : 2002 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENTS - PART 2: GUIDE TO THE ESTIMATION OF UNCERTAINTY IN GPS MEASUREMENT, IN CALIBRATION OF MEASURING EQUIPMENT AND IN PRODUCT VERIFICATION |
| XP E67 030 : 2013 XP | FABRICATION ADDITIVE - PIECES REALISEES PAR FABRICATION ADDITIVE - CAHIER DES CHARGES ET CONDITIONS DE RECEPTION |
| NF ISO 6194-2 : 2009 | ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY |
| NFF 00 090 : 2015 | RAILWAY EQUIPMENT IN GENERAL - MAGNETIC PARTICLE INSPECTION OF PARTS FOR RAILWAY USE - ACCEPTANCE CRITERIA |
| NF ISO 7206-10 : 2004 | IMPLANTS FOR SURGERY - PARTIAL AND TOTAL HIP-JOINT PROSTHESES - PART 10: DETERMINATION OF RESISTANCE TO STATIC LOAD OF MODULAR FEMORAL HEADS |
| NF EN ISO 1302 : 2002 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION |
| NF EN ISO 4287 : 1998 AMD 1 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
| NF EN 10202 : 2002 | COLD REDUCED TINMILL PRODUCTS - ELECTROLYTIC TINPLATE AND ELECTROLYTIC CHROMIUM/CHROMIUM OXIDE COATED STEEL |
| NF ISO 5599-2 : 2002 AMD 1 2004 | PNEUMATIC FLUID POWER - FIVE-PORT DIRECTIONAL CONTROL VALVES - PART 2: MOUNTING INTERFACE SURFACES WITH OPTIONAL ELECTRICAL CONNECTOR |
| NF ISO 5707 : 2007 | MILKING MACHINE INSTALLATIONS - CONSTRUCTION AND PERFORMANCE |
| NFE 11 107 : 2002 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SPHERES FOR METROLOGY |
| FD ISO/TR 10064-4 : 99 FD | CYLINDRICAL GEARS - CODE OF INSPECTION PRACTICE - PART 4: RECOMMENDATIONS RELATIVE TO SURFACE TEXTURE AND TOOTH CONTACT PATTERN CHECKING |
| NF EN 1090-3 : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.