ONORM EN 1034-1 : NOV 2010
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS
15-08-2021
12-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 Requirements for safety devices
5.2 Safety devices on power transmission elements
5.3 Avoiding crushing hazards
5.4 Drawing-in hazards on cylinders, rollers, rolls,
felts, wires
5.5 Workplaces, access stairs, catwalks, passageways
5.6 Start-up warning device
5.7 Emergency stop devices
5.8 Isolation and energy dissipation, prevention of
unexpected start-up
5.9 Equipment for make-ready and maintenance,
lubrication points
5.10 Equipment for cleaning and removal of broke and
waste
5.11 Circular knives
5.12 Stationary knives (severing knives, tail cutters,
water-jet knives)
5.13 Explosion protection
5.14 Control systems and actuators
5.15 Noise
5.16 Emission of hazardous substances
5.17 Hot surfaceser finishing machines
5.18 Integrated lighting
5.19 Fire
5.20 Radiation
5.21 Laser equipment
5.22 Ergonomic principles
5.23 Electrical equipment
5.24 Hydraulic equipment
5.25 Pneumatic equipment
6 Verification of compliance with safety requirements
and/or measures
7 Information for use
Annex A (informative) Trilingual alphabetical list of paper
making and paper finishing machines
Annex ZA (informative) Relationship of this European Standard
with EU Directives
Applies to paper making and paper finishing machines. Contains definitions and requirements applicable to all paper making and finishing machines listed, and shall be used in connection with the specific part applicable for the respective machine.
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNI EN 1034-1 : 2010 | Identical |
| BS EN 1034-1 : 2000 | Identical |
| NF EN 1034-1 : 2000 + A1 2010 | Identical |
| NBN EN 1034-1 : 2008 + A1 2010 | Identical |
| EN 1034-1:2000+A1:2010 | Identical |
| NS EN 1034-1 : 2000 + A1 2010 | Identical |
| SN EN 1034-1 : 2000 + A1 2010 | Identical |
| UNE-EN 1034-1:2000 | Identical |
| I.S. EN 1034-1:2000 | Identical |
| NEN EN 1034-1 : 2000 + A1 2010 | Identical |
| DIN EN 1034-1:2010-12 | Identical |
| ONORM EN 1010-2 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 2: PRINTING AND VARNISHING MACHINES INCLUDING PRE-PRESS MACHINERY |
| ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ONORM EN 1837 : 2009 | SAFETY OF MACHINERY - INTEGRAL LIGHTING OF MACHINES |
| ONORM EN ISO 13857 : 2008 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS |
| ONORM EN ISO 13849-1 : 2016 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ONORM EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| ONORM EN 1010-4 : DEC 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 4: BOOKBINDING, PAPER CONVERTING AND FINISHING MACHINES |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ONORM EN 1127-1 : 2011 | EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ONORM EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.