PD CEN/TR 16149:2011
Current
The latest, up-to-date edition.
Guidance Document for drafting CEN/TC 158 Standards
Hardcopy , PDF
English
30-06-2011
Committee |
PH/6
|
DocumentType |
Standard
|
Pages |
28
|
PublisherName |
British Standards Institution
|
Status |
Current
|
This document has been produced by the convenors of CEN/TC158 working groups. It is intended to serve as a guide, to be consulted when drafting new EN standards for head protection and when revising or amending existing ones. Whilst implementation of its contents is not mandatory, working groups are urged not to make deviations from this guidance document without good cause. This is a living document - omissions will be covered in later issues. In this document, reference is made FprCEN/TR 16148, Head and neck impact, burn and noise injury criteria. This gives further guidance about the areas of the head which helmet standards should aim to protect, and about head and neck injuries. The working group should assess the foreseeable risks against which the helmet should provide protection. Each of the helmet standards should provide for a helmet, which will offer optimum protection to the head against these foreseeable risks and should satisfy the Basic Health and Safety Requirements of EU Directive 89/686/EEC to the extent indicated in annex ZA of the helmet standard. Helmet standards should indicate, in an informative annex, how the level of performance requirements specified relates to the severity of injury to be tolerated. Working groups should refer to FprCEN/TR 16148 when drafting this annex. Reference is also made to EN 13087, Protective helmets, Test methods. This standard provides harmonized methods of test for many of the topics listed below. The various parts of EN 13087 are listed in the Bibliography.
Standards | Relationship |
CEN/TR 16149:2011 | Identical |
EN 13921:2007 | Personal protective equipment - Ergonomic principles |
EN 14052:2012+A1:2012 | High performance industrial helmets |
EN 62013-1:2006 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
BS 8469:2007 | Personal protective equipment for firefighters. Assessment of ergonomic performance and compatibility. Requirements and test methods |
EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
CEN/TR 16148:2011 | Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees |
89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
EN 1149-1:2006 | Protective clothing - Electrostatic properties - Part 1: Test method for measurement of surface resistivity |
ISO 10256:2003 | Head and face protection for use in ice hockey |
EN 13274-4:2001 | Respiratory protective devices - Methods of test - Part 4: Flame tests |
IEC 62013-1:2005 | Caplights for use in mines susceptible to firedamp - Part 1: General requirements - Construction and testing in relation to the risk of explosion |
EN 13781:2012 | Protective helmets for drivers and passengers of snowmobiles and bobsleighs |
ISO 472:2013 | Plastics — Vocabulary |
BS 7971-2:2003 | Protective clothing and equipment for use in violent situations and in training Guidance on risk assessment and on the selection, use, cleaning and maintenance of protective clothing and equipment |
EN 1078:2012+A1:2012 | Helmets for pedal cyclists and for users of skateboards and roller skates |
EN 340:2003 | Protective clothing - General requirements |
EN 14572:2005 | High Performance Helmets for Equestrian Activities |
EN 138:1994 | Respiratory protective devices - Fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece assembly - Requirements, testing, marking |
EN 960:2006 | Headforms for use in the testing of protective helmets |
EN 373 : 1993 | PROTECTIVE CLOTHING - ASSESSMENT OF RESISTANCE OF MATERIALS TO MOLTEN METAL SPLASH |
EN ISO 10256:2003 | Head and face protection for use in ice hockey (ISO 10256:2003) |
EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
EN 397:2012+A1:2012 | Industrial safety helmets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.