EN 326-3:2003
|
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
|
EN 717-2:1994/AC:2002
|
WOOD-BASED PANELS - DETERMINATION OF FORMALDEHYDE RELEASE - PART 2: FORMALDEHYDE RELEASE BY THE GAS ANALYSIS METHOD
|
EN 14323:2017
|
Wood-based panels - Melamine faced boards for interior uses - Test methods
|
EN 950:1999
|
Door leaves - Determination of the resistance to hard body impact
|
EN 319:1993
|
Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board
|
EN 13986:2004
|
Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
|
EN 326-1:1994
|
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
|
EN 322:1993
|
Wood-based panels - Determination of moisture content
|
EN 326-2:2010+A1:2014
|
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
|
89/106/EEC : 1988
|
COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS
|
EN 324-1:1993
|
Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length
|
DIN 68874-1:1985-01
|
SHELVES AND SHELF BEARERS IN CABINET FURNITURE; REQUIREMENTS AND TESTING WHEN MOUNTED IN THE CABINET
|
EN 717-1:2004
|
Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method
|
EN 312:2010
|
Particleboards - Specifications
|
EN 622-5:2009
|
Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF)
|
EN 789:2004
|
Timber structures - Test methods - Determination of mechanical properties of wood based panels
|
EN 1383:2016
|
Timber structures - Test methods - Pull through resistance of timber fasteners
|
EN 325:2012
|
Wood-based panels - Determination of dimensions of test pieces
|
EN 1294:2000
|
Door leaves - Determination of the behaviour under humidity variations in successive uniform climates
|
EN 324-2:1993
|
Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness
|
EN 323:1993
|
Wood-based panels - Determination of density
|
EN 320:2011
|
Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws
|
EN 318:2002
|
Wood based panels - Determination of dimensional changes associated with changes in relative humidity
|
EN 14727 : 2005
|
LABORATORY FURNITURE - STORAGE UNITS FOR LABORATORIES - REQUIREMENTS AND TEST METHODS
|
EN 316:2009
|
Wood fibre boards - Definition, classification and symbols
|
EN 313-2:1999
|
Plywood - Classification and terminology - Part 2: Terminology
|
EN 438-2:2016
|
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties
|
EN 1995-1-1:2004/A2:2014
|
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
|
EN 383:2007
|
Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners
|
EN 309:2005
|
Particleboards - Definition and classification
|
EN 1464:2010
|
Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method
|
EN 636:2012+A1:2015
|
Plywood - Specifications
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
EN 622-1:2003
|
Fibreboards - Specifications - Part 1: General requirements
|
EN 311:2002
|
Wood-based panels - Surface soundness - Test method
|