PD ISO/TS 20460:2015
Current
The latest, up-to-date edition.
Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges
Hardcopy , PDF
English
30-11-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Methodology requirements
5 Methods to evaluate comparability
Annex A (informative) - Typical tolerances
Annex B (informative) - Examples of graphical evaluations
Annex C (informative) - Online gauges principles, limitations
to correlations, sources of errors
Bibliography
Describes guidelines to link and, where applicable, calibrate the online gauge, following laboratory measurement for a given paper and board property.
| Committee |
PAI/11
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Specification establishes guidelines to link and, where applicable, calibrate the online gauge, following laboratory measurement for a given paper and board property.
Paper and board online measuring equipment is mostly based on different technology to that of laboratory equipment. Therefore, this Technical Specification specifies the International Standards to be chosen for the determination of physical properties of paper and board when measured online. It is applicable to all kind of paper and board.
In case of dispute, the usual reference is the laboratory testing but the parties may decide that the online measurements are valid based on the application of this International Standard.
| Standards | Relationship |
| ISO/TS 20460:2015 | Identical |
| ISO 15397:2014 | Graphic technology — Communication of graphic paper properties |
| ISO 8254-1:2009 | Paper and board Measurement of specular gloss Part 1: 75 degree gloss with a converging beam, TAPPI method |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| ISO 22514-1:2014 | Statistical methods in process management — Capability and performance — Part 1: General principles and concepts |
| ISO 5631-1:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 1: Indoor daylight conditions (C/2 degrees) |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO 1762:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 525 degrees C |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO 8254-2:2016 | Paper and board Measurement of specular gloss Part 2: 75 degree gloss with a parallel beam, DIN method |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 2470-2:2008 | Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness) |
| ISO 5631-2:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
| ISO 536:2012 | Paper and board Determination of grammage |
| ISO 13655:2017 | Graphic technology — Spectral measurement and colorimetric computation for graphic arts images |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 7870-4:2011 | Control charts Part 4: Cumulative sum charts |
| ISO 287:2017 | Paper and board — Determination of moisture content of a lot — Oven-drying method |
| ISO 5631-3:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees) |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 8254-3:2016 | Paper and board Measurement of specular gloss Part 3: 20 degree gloss with a converging beam, TAPPI method |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| ISO 9416:2017 | Paper — Determination of light scattering and absorption coefficients (using Kubelka-Munk theory) |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.