PREN 13243 : DRAFT 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS
28-01-2015
25-04-2013
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Special regulations
6 Electrical power, equipment
7 Safety functions
8 Operating and testing devices
9 Transmission of commands and information and
telecommunication equipment
10 Maintenance
11 Technical documents
12 Requirements for ski-tows
Annex A (normative) - Determining the requirement class
Annex B (informative) - Allocation of performance level
PL in accordance with EN 13849 and safety integrity
level SIL in accordance with EN 61508 to the
requirement classes AK
Annex C (normative) - Indicating devices
Annex D (informative) - Assessment of the level of fault
detection (FG) for functions and modules
Annex ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of the EU Directive 2000/9/EC
Bibliography
Defines safety requirements for electrical devices including application software, apart for those in drive systems, for cableway installations designed to carry persons.
| Committee |
TC 242
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 13/30277110 DC : 0 | Identical |
| CEN/TR 14819-1:2004 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels |
| 99/708206 DC : DRAFT MAY 1999 | PREN 12927-2 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS |
| I.S. CEN TR 14819-1:2004 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 1: FUNICULAR RAILWAYS IN TUNNELS |
| 03/303113 DC : DRAFT FEB 2003 | EN 13796-2 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
| 01/705738 DC : DRAFT MAR 2001 | PREN 12927-4 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 4: END FIXING |
| PREN 12927-6 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA |
| 99/708207 DC : DRAFT MAY 1999 | PREN 12927-6 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA |
| PREN 12927-2 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS |
| 00/715519 DC : DRAFT OCT 2000 | PREN 13796-3 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - CARRIERS - PART 3: FATIGUE TESTINGS |
| PD CEN/TR 14819-1:2004 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Funicular railways in tunnels |
| EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
| EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
| EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
| EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
| EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
| EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
| EN 13796-2:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 2: Slipping resistance tests for grips |
| EN 62305-4:2011/AC:2016 | PROTECTION AGAINST LIGHTNING - PART 4: ELECTRICAL AND ELECTRONIC SYSTEMS WITHIN STRUCTURES (IEC 62305-4:2010) |
| EN 50205:2002 | Relays with forcibly guided (mechanically linked) contacts |
| EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
| EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
| EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
| EN 62305-4:2011/AC:2016-11 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| 2000/9/EC : 2000 | DIRECTIVE 2000/9/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 20 MARCH 2000 RELATING TO CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS |
| EN 62305-3:2011 | Protection against lightning - Part 3: Physical damage to structures and life hazard |
| EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
| EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
| EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
| EN 62305-2:2012 | Protection against lightning - Part 2: Risk management |
| EN ISO 13849-2:2012 | Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13849-2:2012) |
| EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| EN 13796-3:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing |
| EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
| EN 50110-2:2010 | Operation of electrical installations - Part 2: National annexes |
| EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.