EN 934-1:2008
|
Admixtures for concrete, mortar and grout - Part 1: Common requirements |
EN 13396:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress |
EN 520:2004+A1:2009
|
Gypsum plasterboards - Definitions, requirements and test methods |
EN ISO 11358-1:2014
|
Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
EN 1504-10:2017
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
EN 13529:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
EN 1015-17:2000/A1:2004
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 17: DETERMINATION OF CHLORIDE CONTENT OF FRESH MORTARS |
EN 12190:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
EN 13687-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
EN 480-14:2006
|
Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
EN 1542:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
EN 1767:1999
|
Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
EN 13057:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
EN 13395-2:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
EN 13036-4:2011
|
Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 13295:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
EN 1015-11 : 1999 AMD 1 2006
|
METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
EN 13501-2:2016
|
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005
|
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test |
EN 14647:2005/AC:2006
|
CALCIUM ALUMINATE CEMENT - COMPOSITION, SPECIFICATIONS AND CONFORMITY CRITERIA |
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
EN 14306:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
EN 1877-2:2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
EN 13412:2006
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
EN ISO 9239-1:2010
|
Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
EN 12620:2002+A1:2008
|
Aggregates for concrete |
ISO 390:1993
|
Products in fibre-reinforced cement Sampling and inspection |
EN 12192-1:2002
|
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
EN 1504-2:2004
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
ISO 11358:1997
|
Plastics Thermogravimetry (TG) of polymers General principles |
EN ISO 12696:2016
|
Cathodic protection of steel in concrete (ISO 12696:2016) |
CEN/TS 12390-9:2016
|
Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
ISO 2812-1:2017
|
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
EN 12617-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
EN 13395-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
EN 1877-1:2000
|
Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
EN 1504-1:2005
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
EN 1504-8:2016
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
EN 13055-1:2002/AC:2004
|
LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT |
EN 13687-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
EN 13584:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
EN 1766:2017
|
Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
ISO 9514:2005
|
Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
EN 13395-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN 1770:1998
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
ISO 12696:2016
|
Cathodic protection of steel in concrete |
EN 13687-4:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
EN 14487-1:2005
|
Sprayed concrete - Part 1: Definitions, specifications and conformity |
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST |
EN 1504-9:2008
|
Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
EN 13395-1:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
EN 13294:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |