ISO 7724-1:1984
|
Paints and varnishes Colorimetry Part 1: Principles
|
EN 2334 : 1997
|
AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS
|
EN ISO 4628-2:2016
|
Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016)
|
MIL-PRF-6081 Revision E:2014
|
LUBRICATING OIL, JET ENGINE
|
PREN 3847 : 200P2
|
AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING
|
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011)
|
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
|
EN ISO 1524:2013
|
Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013)
|
EN ISO 11890-2:2013
|
PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
|
SAE AMS 1527 : 2014
|
CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING
|
PREN 4688 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
|
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
|
ISO 7724-2:1984
|
Paints and varnishes Colorimetry Part 2: Colour measurement
|
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013)
|
DEFSTAN 68-10/5(2003) : 2003
|
CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24
|
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998)
|
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
|
EN ISO 9514:2005
|
Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005)
|
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016)
|
EN 2437 : 2001
|
AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS
|
EN ISO 2811-3:2011
|
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
|
EN ISO 1513:2010
|
Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010)
|
ISO 7724-3:1984
|
Paints and varnishes Colorimetry Part 3: Calculation of colour differences
|
MIL-PRF-23699 Revision G:2014
|
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
|
EN ISO 3680:2004
|
Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004)
|
EN ISO 9117-1:2009
|
Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009)
|
PREN 4160 : 200P1
|
AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE
|
EN 2101 : 1991
|
AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS
|
PREN 3837 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS
|
MIL-DTL-83133 Revision J:2015
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37)
|
EN ISO 2811-4:2011
|
Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011)
|
EN ISO 1520:2006
|
Paints and varnishes - Cupping test (ISO 1520:2006)
|
EN ISO 11890-1:2007
|
Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
|
SAE AMS 1526 : 2008
|
CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE
|
ISO 3270:1984
|
Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
|
EN ISO 1519:2011
|
Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011)
|
EN ISO 3679:2015
|
Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015)
|
SAE AMS 1533 : 2008
|
CLEANER FOR EXTERIOR AIRCRAFT SURFACES, GEL-TYPE, SOLVENT-BASE
|
EN ISO 1518:2000
|
Paints and varnishes - Scratch test (ISO 1518:1992)
|
EN ISO 3678:1995
|
Paints and varnishes - Print-free test (ISO 3678:1976)
|
PREN 4689 : 200P1
|
AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
|
EN 3840:2007
|
Aerospace series - Paints and varnishes - Technical specification
|
EN ISO 2813:2014
|
Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014)
|
EN ISO 9117-3:2010
|
Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010)
|