PREN 4700-006 : 200P2
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS
Available format(s)
Hardcopy , PDF
Withdrawn date
26-12-2023
Superseded by
Language(s)
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
6.1 General
6.2 Qualification requirements
6.3 Re-qualification requirements
6.4 Release requirements
6.5 Process control testing (Procedure X)
6.6 Retests
6.7 Special tests
6.8 Capability clause
6.9 Statistical process control
6.10 Inspection and test report
Describes the requirements for the ordering, manufacture, testing, inspection and delivery of wrought products in steel and heat resisting alloys. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| DevelopmentNote |
Supersedes PREN 2860-1 & PREN 2860-3. (09/2009)
|
| DocumentType |
Draft
|
| Pages |
27
|
| ProductNote |
Superseded by EN 4700-006:2010
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NF EN 4700-006 : 2012 | Identical |
| PREN 2483 : 200P1 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1100 MPA <= R[M] <= 1300 MPA - FORGINGS - D[E] <= 100 MM |
| PREN 4658 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1520 MPA |
| PREN 4659 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1507 (X1CRNIMOALTI12-11-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1650 MPA |
| BS EN 2461:2009 | Aerospace series. Steel FE-PM1901 (X12CrNi13). 600 MPa ≤ Rm ≤ 800 MPa. Forgings. De ≤ 70 mm |
| BS EN 3677:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| BS EN 3678:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 930 MPa |
| I.S. EN 2818:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1070 MPA |
| PREN 2226 : 200P1 | AEROSPACE SERIES - STEEL FE-PM 3501 (X105CRMO17) - HARDENED AND TEMPERED - HAND AND DIE FORGINGS D[E] <= 150 MM |
| PREN 4671 : 200P1 | AEROSPACE SERIES - STEEL FE-PM1506 (X1CRNIMOALTI12-10-2) - VACUUM INDUCTION MELTED AND CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION REMELTED - FORGINGS - A OR D <= 200 MM - R[M] >= 1400 MPA |
| I.S. EN 3469:2009 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 200 MM - R[M] >= 1310 MPA |
| I.S. EN 3529:2010 | AEROSPACE SERIES - STEEL FE-PM2701 (X2NICOMO18-8-5) - VACUUM INDUCTION MELTED AND VACUUM ARC REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS - A OR D <= 150 MM - 1750 MPA <= R[M] <= 2000 MPA |
| 09/30211110 DC : 0 | BS EN 2226 - AEROSPACE SERIES - STEEL FE-PM3501 (X105CRMO17) - HARDENED AND TEMPERED - HAND AND DIE FORGINGS D[E] <= 150 MM |
| PREN 2252 : 200P1 | AEROSPACE SERIES - STEEL FE-PL1505 (15CRMOV6) - 1080 MPA <= R[M] <= 1250 MPA - FORGINGS - D[E] <= 100 MM |
| BS EN 2439:2009 | Aerospace series. Steel FE-PL2102 (34NiCr6). 900 MPa ≤ Rm ≤ 1100 MPa. Forgings. De ≤ 40 mm |
| BS EN 3469:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1310 MPa |
| BS EN 3529:2010 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| EN 2439:2009 | Aerospace series - Steel FE-PL2102 (34NiCr6) - 900 MPa ≤ Rm ≤ 1 100 MPa - Forgings - De ≤ 40 mm |
| EN 2818:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 070 MPa |
| EN 3677:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 3469:2009 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 1 310 MPa |
| EN 2461:2009 | Aerospace series - Steel FE-PM1901 (X12CrNi13) - 600 MPa ≤ Rm ≤ 800 MPa - Forgings - De ≤ 70 mm |
| EN 3529:2010 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 3678:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa |
| PREN 2481 : 200P1 | AEROSPACE SERIES - STEEL FE-PL2108 (36NICRMO16) - 1250 MPA <= R[M] <= 1400 MPA - FORGINGS - D[E] <= 75 MM |
| BS EN 2818:2009 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 200 mm. Rm ≥ 1070 MPa |
| EN 2157-3:1993 | Aerospace series - Steel - Forging stock and forgings - Technical specification - Part 3: Pre-production and production forgings |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| PREN 4436 : 200P1 | AEROSPACE SERIES - STEEL - TEST METHODS - DETERMINATION OF DELTA FERRITE CONTENT |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| PREN 2003-7 : 200P1 | AEROSPACE SERIES - STEEL - TEST METHODS - PART 7: MACROGRAPHIC TEST |
| SAE AMS2750E | Pyrometry |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| PREN 4268 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - HEAT TREATMENT FACILITIES - GENERAL REQUIREMENTS |
| PREN 3874 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED LOW CYCLE FATIGUE TESTING |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| PREN 3987 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE FORCE-CONTROLLED HIGH CYCLE FATIGUE TESTING |
| ISO 9001:2015 | Quality management systems — Requirements |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| PREN 2003-5 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR STEEL PRODUCTS - PART 5: CHARPY IMPACT TEST (V NOTCH) |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| PREN 3988 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - CONSTANT AMPLITUDE STRAIN-CONTROLLED LOW CYCLE FATIGUE TESTING |
| PREN 4050-4 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.