SAE AIR 6464 : 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES
Superseded date
08-02-2020
Superseded by
Published date
01-01-2013
Publisher
Sorry this product is not available in your region.
1. SCOPE
2. REFERENCES
3. DEFINITIONS AND ABBREVIATIONS
4. AIRCRAFT EQUIPMENT, TEST REQUIREMENT AND
SYSTEM SAFETY GUIDELINES
5. GROUND AND FLIGHT OPERATION AND MAINTENANCE
6. NOTES
APPENDIX A - LIQUID HYDROGEN STORAGE SAFETY
APPENDIX B - FUEL CELL SYSTEM THERMAL MANAGEMENT
Describes the technical guidelines for the safe integration of Proton Exchange Membrane (PEM) Fuel Cell Systems (FCS), fuel (considered to be liquid and compressed hydrogen storage types only), fuel storage, fuel distribution and appropriate electrical systems into the aircraft.
| DocumentType |
Standard
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AS 6858 : 2017 | INSTALLATION OF FUEL CELL SYSTEMS IN LARGE CIVIL AIRCRAFT |
| SAE AS6858 | Installation of Fuel Cell Systems in Large Civil Aircraft |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| FAA AC 25.981-2 : 2008 | FUEL TANK FLAMMABILITY REDUCTION MEANS |
| SAE AIR 5128 : 2012 | ELECTRICAL BONDING OF AIRCRAFT FUEL SYSTEMS |
| SAE AIR825D | Oxygen Equipment for Aircraft |
| RTCA DO 178 : C2011 | SOFTWARE CONSIDERATIONS IN AIRBORNE SYSTEMS AND EQUIPMENT CERTIFICATION |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| IEEE C62.41-1991 | IEEE Recommended Practice for Surge Voltages in Low-Voltage AC Power Circuits |
| ISO 21013-3:2016 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination |
| ISO 21013-1:2008 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves |
| FAA AC 20-136 : 2011 | AIRCRAFT ELECTRICAL AND ELECTRONIC SYSTEM LIGHTNING PROTECTION |
| ISO 21010:2014 | Cryogenic vessels Gas/materials compatibility |
| ISO 21011:2008 | Cryogenic vessels — Valves for cryogenic service |
| SAE ARP4754A | Guidelines for Development of Civil Aircraft and Systems |
| IEC TS 62282-1:2013 | Fuel cell technologies - Part 1: Terminology |
| ISO 13985:2006 | Liquid hydrogen — Land vehicle fuel tanks |
| ISO 21029-2:2015 | Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 2: Operational requirements |
| SAE ARP4752B | Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems |
| ISO/PAS 15594:2004 | Airport hydrogen fuelling facility operations |
| IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
| RTCA DO 254 : 2000 | DESIGN ASSURANCE GUIDANCE FOR AIRBORNE ELECTRONIC HARDWARE |
| IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
| ISO 21014:2006 | Cryogenic vessels Cryogenic insulation performance |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| IEC 62282-2:2012 | Fuel cell technologies - Part 2: Fuel cell modules |
| ISO/TS 15869:2009 | Gaseous hydrogen and hydrogen blends Land vehicle fuel tanks |
| SAE AIR1811A | Liquid Cooling Systems |
| SAE ARP4761 | GUIDELINES AND METHODS FOR CONDUCTING THE SAFETY ASSESSMENT PROCESS ON CIVIL AIRBORNE SYSTEMS AND EQUIPMENT |
| ISO 21028-1:2016 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C |
| ISO/TS 14687-2:2008 | Hydrogen fuel Product specification Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles |
| SAE ARP1870A | Aerospace Systems Electrical Bonding and Grounding for Electromagnetic Compatibility and Safety |
| SAE AIR 1277 : 2005 | COOLING OF MILITARY AVIONIC EQUIPMENT |
| ISO 21028-2:2004 | Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 2: Temperatures between -80 degrees C and -20 degrees C |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 24490:2016 | Cryogenic vessels Pumps for cryogenic service |
| SAE ARP5416A | Aircraft Lightning Test Methods |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| SAE AIR1168/8A | Aircraft Fuel Weight Penalty Due to Air Conditioning |
| SAE ARP 5577 : 2002 | AIRCRAFT LIGHTNING DIRECT EFFECTS CERTIFICATION |
| SAE ARP5414A | Aircraft Lightning Zone |
| IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
| SAE AIR825/12A | Oxygen System Integration and Performance Precautions |
| SAE AIR 64 : 1992 | ELECTRICAL AND ELECTRONIC EQUIPMENT COOLING IN COMMERCIAL TRANSPORTS |
| ISO 13984:1999 | Liquid hydrogen — Land vehicle fuelling system interface |
| FAA AC 25.981-1 : 2008 | FUEL TANK IGNITION SOURCE PREVENTION GUIDELINES |
| ISO 21013-2:2007 | Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| ISO 21029-1:2004 | Cryogenic vessels Transportable vacuum insulated vessels of not more than 1 000 litres volume Part 1: Design, fabrication, inspection and tests |
| IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
| ISO 3864:1984 | Safety colours and safety signs |
| SAE ARP5412B | Aircraft Lightning Environment and Related Test Waveforms |
| IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
| ISO 21012:2006 | Cryogenic vessels Hoses |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.