IEC 61508-4:2010
Current
The latest, up-to-date edition.
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English - French, Spanish, Castilian
30-04-2010
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions and abbreviations
Bibliography
Index
IEC 61508-4:2010 contains the definitions and explanation of terms that are used in parts 1 to 7 of the IEC 61508 series of standards. The definitions are grouped under general headings so that related terms can be understood within the context of each other. However, it should be noted that these headings are not intended to add meaning to the definitions. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. It has been subject to a thorough review and incorporates many comments received at the various revision stages. It has the status of a basic safety publication according to IEC Guide 104.
NEW! Also available: IEC Standards+ 61508:2010, containing all parts, together with a commented Redline version. Changes made in this 2nd edition are highlighted and commented by a leading world expert.
This publication is of high relevance for Smart Grid.
Committee |
TC 65/SC 65A
|
DevelopmentNote |
Stability Date: 2017. (09/2017)
|
DocumentType |
Standard
|
ISBN |
978-2-88910-527-4
|
Pages |
68
|
PublisherName |
International Electrotechnical Committee
|
Status |
Current
|
Supersedes |
Standards | Relationship |
GOST R IEC 61508-4 : 2012 | Identical |
NF EN 61508-4 : 2011 | Identical |
NBN EN 61508-4 : 2010 | Identical |
NEN EN IEC 61508-4 : 2010 | Identical |
I.S. EN 61508-4:2010 | Identical |
VDE 0803-4 : 2011 | Identical |
DIN EN 61508-4 : 2011 | Identical |
UNE-EN 61508-4:2011 | Identical |
AS 61508.4-2011 | Identical |
BS EN 61508-4:2010 | Identical |
EN 61508-4:2010 | Identical |
JIS C 0508-4:2012 | Identical |
BIS IS/IEC 61508-4 : 1998 | Identical |
PN EN 61508-4 : 2010 | Identical |
CEI EN 61508-4 : 2011 | Identical |
BS IEC 61508-4 : 98 AMD 13782 | Identical |
BS EN 61158-4-4:2014 | Identical |
NEN IEC 61508-4 : 99 C1 99 | Identical |
98/262288 DC : DRAFT JUN 1998 | Identical |
BS EN 60880:2009 | Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions |
UNE-EN 60947-5-3:2014 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
UNE-EN 61508-5:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 5: Examples of methods for the determination of safety integrity levels |
CEI EN 62733 : 2017 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
CEI EN 61784-3-12 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
PD IEC/TR 63039:2016 | Probabilistic risk analysis of technological systems. Estimation of final event rate at a given initial state |
06/30109242 DC : DRAFT SEP 2006 | ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
09/30183366 DC : 0 | BS EN 13611:2007/A1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES - GENERAL REQUIREMENTS |
UNE-IEC/TS 62143:2011 | Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology |
BS EN 61226:2010 | Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions |
CEI EN 61508-3 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
13/30285587 DC : 0 | BS EN 14459 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT |
API RP 554-3 : 2008 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
BS EN 62138:2009 | Nuclear power plants. Instrumentation and control important for safety. Software aspects for computer-based systems performing category B or C functions |
16/30323859 DC : 0 | BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE) |
PD CLC/TR 62685:2011 | Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
CSA C22.2 No. 0.8 : 2012 : INC : UPD 1 : 2013 | SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY |
03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
CEI EN 61131-6 : 2013 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY |
BS EN 61131-6:2012 | Programmable controllers Functional safety |
I.S. EN 61326-3-1:2017 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
CEI EN 61784-3-8 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8 |
BS TICKIT GUIDE : ISSUE 5.5 | A GUIDE TO SOFTWARE QUALITY MANAGEMENT SYSTEM CONSTRUCTION AND CERTIFICATION TO ISO 9001:2000 |
UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
04/30031949 DC : DRAFT SEP 2004 | |
13/30294110 DC : 0 | BS EN 61784-3-X ED 1.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-X: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF X |
BS EN 61165:2006 | Application of Markov techniques |
CEI EN 60947-5-3 : 2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
I.S. EN 50270:2015 | ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN |
05/30134150 DC : DRAFT MAY 2005 | EN 15233 - METHODOLOGY FOR FUNCTIONAL SAFETY ASSESSMENT OF PROTECTIVE SYSTEMS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES |
11/30251720 DC : 0 | BS EN 81-50 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
03/118984 DC : 0 | ISO 15998 - EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS |
BS EN 50090-2-3:2005 | Home and building electronic systems (HBES) System overview. General functional safety requirements for products intended to be integrated in HBES |
BS EN 61784-3-2:2017 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 2 |
BS EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
PD IEC/TR 61508-0:2005 | Functional safety of electrical/electronic/programmable electronic safety-related systems Functional safety and IEC 61508 |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
BS EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) Generic standards. Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
BS EN 50270:2015 | Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
BS PD IEC TR 62685 : 2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
BS IEC 61508-7 : 2000 AMD 13785 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
08/30193509 DC : DRAFT NOV 2008 | BS EN 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
EN 61784-3-3:2017 | Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 |
DIN EN 50402 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
S.R. CLC/TR 62685:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV)) |
CEI EN 62551 : 2013 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES |
I.S. EN 61162-402:2005 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 402: MULTIPLE TALKERS AND MULTIPLE LISTENERS - SHIP SYSTEMS INTERCONNECTION - DOCUMENTATION AND TEST REQUIREMENTS |
S.R. HD 60364-5-557:2013 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
CSA ISO/IEC 16085 : 2007 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
CEI EN 50495 : 2011 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
I.S. EN 1012-3:2013 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
I.S. EN ISO 18217:2015 | SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
CSA HPIT 2-2017 | Dispensing systems and components for fueling hydrogen powered industrial trucks |
CEI EN 61069-1 : 1998 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
I.S. EN 50402:2017 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
I.S. EN 61784-3-17:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-17: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 17 |
I.S. EN 61508-7:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
NF ISO 15998 : 2009 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
NF EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
VDE 0400-70 : 2018 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
CEI EN 61508-5 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS |
I.S. EN 61165:2006 | APPLICATION OF MARKOV TECHNIQUES |
17/30356606 DC : 0 | BS ISO 8100-1 - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 1: SAFETY REQUIREMENTS FOR PASSENGER AND GOODS PASSENGER LIFTS |
BS EN 62733:2015 | Programmable components in electronic lamp controlgear. General and safety requirements |
UNI EN 81-22 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications |
IEC 60092-504:2016 RLV | Electrical installations in ships - Part 504: Automation, control and instrumentation |
EN 62138:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
EN 62733:2015/AC:2017-09 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
EN 13463-6:2005 | Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection by control of ignition source 'b' |
EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
DIN EN 81-2:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
EN 60965:2016 | Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room |
EN 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
EN 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
EN 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
EN 60300-3-4:2008 | Dependability management - Part 3-4: Application guide - Guide to the specification of dependability requirements |
CEN/TS 15260:2006 | Health informatics - Classification of safety risks from health informatics products |
EN 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
EN 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
EN 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
HD 60364-5-557:2013/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-557: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - AUXILIARY CIRCUITS |
EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
EN 60880:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
EN ISO 80079-37:2016 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
EN 62808:2016 | Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices |
15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
UNE-EN 61508-1:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 1: General requirements |
BS EN 61508-1:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems General requirements |
14/30298051 DC : 0 | BS EN 61069-1 ED 2.0 - INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
BS IEC 61500 : 2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
I.S. EN 62138:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
UNE-EN 50495:2010 | Safety devices required for the safe functioning of equipment with respect to explosion risks |
BS IEC 62808 : 2015 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES |
PD CEN ISO/TR 12489:2016 | Petroleum, petrochemical and natural gas industries. Reliability modelling and calculation of safety systems |
BS EN 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems. Digital interfaces Multiple talkers and multiple listeners. Ship systems interconnections. Documentation and test requirements |
06/30150265 DC : 0 | EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS |
BS 5724-1.4(1997) : 1997 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD - GENERAL REQUIREMENTS FOR PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
DD IEC/TS 62143:2002 | Electrical installations for lighting and beaconing of aerodromes. Aeronautical ground lighting systems. Guidelines for the development of a safety lifecycle methodology |
I.S. EN 13463-6:2005 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
CAN/CSA-C22.2 NO. 61508-3:17 | Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 3: Software requirements (Adopted IEC 61508-3:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 3 : Exigences concernant les logiciels (norme IEC 61508-3:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada) |
05/30143452 DC : DRAFT DEC 2005 | IEC 61508-1 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 1: GENERAL REQUIREMENTS |
13/30278416 DC : 0 | BS EN 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
IEC TR 63039:2016 | Probabilistic risk analysis of technological systems - Estimation of final event rate at a given initial state |
BS IEC 61513:2011 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
DD ISO/TS 25238:2007 | Health informatics. Classification of safety risks from health software |
BS EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen. Requirements on the functional safety of gas detection systems |
CEI EN 61326-3-2 : 2011 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
BS EN 60947-5-3:2013 | Low-voltage switchgear and controlgear Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
I.S. EN 62551:2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012 (EQV)) |
PREN 81-50 : DRAFT 2011 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATIONS AND TESTS - PART 50: DESIGN RULES, CALCULATIONS, EXAMINATIONS AND TESTS OF LIFT COMPONENTS |
BS EN 61508-6:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
11/30253360 DC : 0 | BS EN ISO 13628-14 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 14: SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
BS EN 61508-3:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Software requirements |
UNE-EN 62551:2014 | Analysis techniques for dependability - Petri net techniques |
BS EN 61511-1 : 2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS (IEC 61511-1:2016 + COR1:2016) |
03/114995 DC : DRAFT SEP 2003 | ISO 17894 - SHIPS AND MARINE TECHNOLOGY - COMPUTER APPLICATIONS - GENERAL PRINCIPLES FOR THE DEVELOPMENT AND USE OF PROGRAMMABLE ELECTRONIC SYSTEMS IN MARINE APPLICATIONS |
13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
04/30114881 DC : 0 | IEC 61326-3 ED1 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. EMC REQUIREMENTS - PART 3: IMMUNITY REQUIREMENTS FOR EQUIPMENT PERFORMING OR INTENDED TO PERFORM SAFETY RELATED FUNCTIONS (FUNCTIONAL SAFETY) IN INDUSTRIAL APPLICATIONS |
03/314812 DC : DRAFT SEP 2003 | ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
CEI EN 60880 : 2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
BS EN 15333-1:2008 | Respiratory equipment. Open-circuit umbilical supplied compressed gas diving apparatus Demand apparatus |
BS ISO 22201-1:2017 | Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety-related applications Lifts (elevators) (PESSRAL) |
BS EN 61784-3-8:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 8 |
CEI EN 61784-3-6 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
BS EN 61784-3:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. General rules and profile definitions |
PREN 50402 : DRAFT 2013 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
I.S. EN 61508-2:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
BS ISO/IEC 16085:2006 | Systems and software engineering. Life cycle processes. Risk management |
BS EN 61784-3-1:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 1 |
04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
BS IEC 61508-3 : 1998 AMD 13781 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - SOFTWARE REQUIREMENTS |
I.S. EN 61000-6-7:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL LOCATIONS |
I.S. EN 61508-5:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY |
CEI EN 61508-7 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETYRELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
BS IEC 60880-2:2000 | Software for computers important to safety for nuclear power plants Software aspects of defence against common cause failures, use of software tools and of pre-developed software |
CEI EN 61508-1 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
CSA ISO/IEC 16085 : 2007 : R2012 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
CSA C22.2 No. 0.8:2012 | SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY |
I.S. EN 61511-1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE (UON) - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
EN 50402:2017 | Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of gas detection systems |
IEC TR 62096:2009 | Nuclear power plants - Instrumentation and control important to safety - Guidance for the decision on modernization |
PREN 50330-1 : DRAFT 99 | PHOTOVOLTAIC SEMICONDUCTOR CONVERTERS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTERS - DESIGN QUALIFICATION AND TYPE APPROVAL |
I.S. EN 61784-3:2016 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS |
I.S. EN 62765-1:2017 | NUCLEAR POWERS PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS |
EN 61226:2010 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
BS EN 61508-5:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Examples of methods for the determination of safety integrity levels |
I.S. EN 61000-1-2:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
I.S. EN 61508-3:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
I.S. EN 50156-1:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
EN 61784-3:2016/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017) |
CSA C22.2 No. 0.8 : 2012( R2016) | SAFETY FUNCTIONS INCORPORATING ELECTRONIC TECHNOLOGY |
I.S. EN 62733:2015 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
ISO 22201-1:2017 | Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety-related applications — Part 1: Lifts (elevators) (PESSRAL) |
NF EN 61508-1 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
EN IEC 62246-1-1:2018 | Reed switches - Part 1-1: Generic specification - Blank detail specification |
NF EN 61326-3-2 : 2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
NF EN 61508-6 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
CLC/TR 62685:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010) |
IEC 60364-5-55:2011+AMD1:2012+AMD2:2016 CSV | Electrical installations of buildings - Part 5-55: Selection and erection of electrical equipment - Other equipment |
IEC 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
S.R. CWA 15902-1:2009 | LIFTING AND LOAD-BEARING EQUIPMENT FOR STAGES AND OTHER PRODUCTION AREAS WITHIN THE ENTERTAINMENT INDUSTRY - PART 1: GENERAL REQUIREMENTS (EXCLUDING ALUMINIUM AND STEEL TRUSSES AND TOWERS) |
DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
DIN EN 14459:2016-02 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
DIN EN 15233:2007-11 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
IEC 61000-6-7:2014 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
BS EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
UNE-EN 61508-7:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 7: Overview of techniques and measures |
UNE-EN 81-20:2017 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts |
IEC 61511-1:2016 RLV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
I.S. EN 14143:2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
I.S. EN 14459:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - CONTROL FUNCTIONS IN ELECTRONIC SYSTEMS - METHODS FOR CLASSIFICATION AND ASSESSMENT |
I.S. EN ISO 13849-1:2015 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN (ISO 13849-1:2015) |
I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
I.S. EN 81-1:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
DIN EN 13463-6:2005-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 6: PROTECTION BY CONTROL OF IGNITION SOURCE 'B' |
ANSI B11 TR4 : 2004 | SELECTION OF PROGRAMMABLE ELECTRONIC SYSTEMS (PES/PLC) FOR MACHINE TOOLS |
I.S. EN 81-2:1999 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
ANSI B11 TR6 : 2010 | MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS |
VDI 4003:2007-03 | Reliability management |
VDI/VDE 2184:2008-06 | Reliable operation and maintenance of field bus systems |
DIN IEC 60880-2 : 2001 | NUCLEAR POWER PLANTS - SOFTWARE FOR COMPUTERS IMPORTANT TO SAFETY - PART 2: SOFTWARE ASPECTS OF DEFENCE AGAINST COMMON CAUSE FAILURES, USE OF SOFTWARE TOOLS AND OF PRE-DEVELOPED SOFTWARE |
PD 5304:2000 | SAFE USE OF MACHINERY |
VDI/VDE 2182 Blatt 1:2011-01 | IT-security for industrial automation - General model |
I.S. EN 60965:2016 | NUCLEAR POWER PLANTS - CONTROL ROOMS - SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM |
08/30193508 DC : DRAFT NOV 2008 | BS EN 61508-1 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
EEMUA 208 : 2010 | GUIDE TO LIFE-CYCLE MANAGEMENT OF PRESSURE RELIEF SYSTEMS |
17/30327241 DC : 0 | BS EN 61500 ED.2 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
11/30251717 DC : 0 | BS EN 81-20 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
09/30176792 DC : 0 | BS EN 61513 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS |
NF EN 13611 : 2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
12/30268377 DC : 0 | BS EN 50156-2 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
BS EN ISO 80079-37:2016 | Explosive atmospheres Non-electrical equipment for explosive atmospheres. Non-electrical type of protection constructional safety \'\'c\'\', control of ignition sources \'\'b\'\', liquid immersion \'\'k\'\' |
BS IEC 62671:2013 | Nuclear power plants. Instrumentation and control important to safety. Selection and use of industrial digital devices of limited functionality |
16/30331802 DC : 0 | BS EN 62887 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION SYSTEMS IMPORTANT TO SAFETY - PRESSURE TRANSMITTERS: CHARACTERISTICS AND TEST METHODS |
DIN EN ISO 80079-37:2016-12 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety "c", control of ignition sources "b", liquid immersion "k" (ISO 80079-37:2016) |
DIN EN ISO 18217:2015-12 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
BS IEC 60880:2006 | Nuclear power plants. Instrumentation and control systems important to safety. Software aspects for computer-based systems performing category A functions |
BS EN 61513:2013 | Nuclear power plants. Instrumentation and control important to safety. General requirements for systems |
BS IEC 62765-1 : 2015 | NUCLEAR POWERS PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS |
NF EN 15333-1 : 2011 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
15/30298379 DC : 0 | BS EN 60965 ED 3.0 - NUCLEAR POWER PLANTS - CONTROL ROOMS - SUPPLEMENTARY CONTROL ROOM FOR REACTOR SHUTDOWN WITHOUT ACCESS TO THE MAIN CONTROL ROOM |
NF EN 61508-7 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
NF EN 61508-5 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS |
PREN 50156-2 : DRAFT 2012 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
17/30309594 DC : 0 | BS IEC 62138 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
BS EN IEC 62246-1-1:2018 | Reed switches Generic specification. Blank detail specification |
07/30146249 DC : 0 | BS ISO 22201 - LIFTS (ELEVATORS) - DESIGN AND DEVELOPMENT OF PROGRAMMABLE ELECTRONIC SYSTEM IN SAFETY RELATED APPLICATION FOR LIFTS (PESSRAL) |
DD IEC/TS 61000-1-2:2001 | Electromagnetic compatibility (EMC). General Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena |
CEI EN 61784-3-2 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2 |
I.S. EN 61326-3-2:2008 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
BS EN 61784-3-12:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 12 |
BS IEC/IEEE 62582-5:2015 | Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Optical time domain reflectometry |
CEI EN 61500 : 2012 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
EN 62765-1:2017 | Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters |
PD IEC/TR 61850-90-4:2013 | Communication networks and systems for power utility automation Network engineering guidelines |
NF EN 50495 : 2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
14/30318350 DC : 0 | BS EN 61326-3-1 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
07/30169528 DC : 0 | BS EN 15333-2 - RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 2: FREE FLOW APPARATUS |
99/240939 DC : DRAFT MAR 99 | BS EN 50330-1 PHOTOVOLTAIC SEMICONDUCTOR CONVERTORS - PART 1: UTILITY INTERACTIVE FAIL SAFE PROTECTIVE INTERFACE FOR PV-LINE COMMUTATED CONVERTORS - DESIGN QUALIFICATION AND TYPE APPROVAL |
S.R. CEN ISO/TR 12489:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS (ISO/TR 12489:2013) |
13/30260728 DC : 0 | BS EN 50402 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
CEI EN 61784-3-3 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3 |
11/30214874 DC : 0 | BS ISO 22201-2 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 2: ESCALATORS AND MOVING WALKS (PESSRAE) |
05/30134105 DC : DRAFT MAY 2005 | IEC 61800-5-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
UNE-EN 14459:2016 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
BS EN 1012-3:2013 | Compressors and vacuum pumps. Safety requirements Process compressors |
BS IEC 61508-1 : 1998 AMD 13779 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - GENERAL REQUIREMENTS |
08/30193478 DC : DRAFT NOV 2008 | BS EN 61508-7 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 7: OVERVIEW OF TECHNIQUES AND MEASURES |
ISO/IEC TR 29108:2013 | Information technology Terminology for intelligent homes |
04/30115151 DC : DRAFT JUNE 2004 | ISO/IEC 16085 - SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES - RISK MANAGEMENT |
04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
UNI EN 15333-1 : 2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
09/30193520 DC : 0 | BS EN 60947-5-3 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDF) |
CSA ISO/IEC 16085 : 2007 : R2017 | SYSTEMS AND SOFTWARE ENGINEERING - LIFE CYCLE PROCESSES - RISK MANAGEMENT |
EN 61784-3-8:2017 | Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 |
IEC 61784-3-3:2016 | Industrial communication networks - Profiles - Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 |
SAE AIR 6464 : 2013 | EUROCAE/SAE WG80/AE-7AFC HYDROGEN FUEL CELLS AIRCRAFT FUEL CELL SAFETY GUIDELINES |
ASCE 21 05 : 2006 | AUTOMATED PEOPLE MOVER STANDARDS - PART 1 |
IEC 61784-3-18:2011+AMD1:2016 CSV | Industrial communication networks - Profiles - Part 3-18: Functionalsafety fieldbuses - Additional specifications for CPF 18 |
CEI CLC/TR 62685 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
NF EN 61508-3 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
NF EN 50402 : 2017 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE OR TOXIC GASES OR VAPOURS OR OF OXYGEN - REQUIREMENTS ON THE FUNCTIONAL SAFETY OF GAS DETECTION SYSTEMS |
IEC TR 62235:2005 | Nuclear facilities - Instrumentation and control systems important to safety - Systems of interim storage and final repository of nuclear fuel and waste |
NF EN 61557-15 : 2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
IEC 60092-504:2016 | Electrical installations in ships - Part 504: Automation, control and instrumentation |
ASCE T&DI 21 13 : 2013 | AUTOMATED PEOPLE MOVER STANDARDS |
OLF 070 : 2004 | |
BS EN 61784-3-18 : 2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011) |
IEC 60880-2:2000 | Software for computers important to safety for nuclear power plants - Part 2: Software aspects of defence against common cause failures, use of software tools and of pre-developed software |
I.S. EN 15333-1:2008 | RESPIRATORY EQUIPMENT - OPEN-CIRCUIT UMBILICAL SUPPLIED COMPRESSED GAS DIVING APPARATUS - PART 1: DEMAND APPARATUS |
I.S. EN 60947-5-3:2013 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-3: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH DEFINED BEHAVIOUR UNDER FAULT CONDITIONS (PDDB) |
EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
I.S. EN 62808:2016 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - DESIGN AND QUALIFICATION OF ISOLATION DEVICES |
NF EN 62733 : 2015 | PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS |
UNE-EN 50271:2011 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen - Requirements and tests for apparatus using software and/or digital technologies |
BS EN 50271:2010 | Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen. Requirements and tests for apparatus using software and/or digital technologies |
I.S. EN 61784-3-6:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-6: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 6 |
I.S. EN 61784-3-3:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-3: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 3 |
CAN/CSA-C22.2 NO. 61511-1:17 | Functional safety — Safety instrumented systems for the process industry sector — Part 1: Framework, definitions, system, hardware and application programming requirements (Adopted IEC 61511-1:2016, second edition, 2016-02, with Canadian deviations) | Sécurité fonctionnelle — Systèmes instrumentes de sécurité pour le secteur des industries de transformation — Partie 1 : Cadre, définitions, exigences pour le système, le matériel et la programmation d’application (norme IEC 61511-1:2016 adoptée, deuxième édition, 2016-02, avec exigences propres au Canada) |
I.S. EN 61508-6:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 6: GUIDELINES ON THE APPLICATION OF IEC 61508-2 AND IEC 61508-3 |
CEN ISO/TR 12489:2016 | Petroleum, petrochemical and natural gas industries - Reliability modelling and calculation of safety systems (ISO/TR 12489:2013) |
CEI EN 61784-3-14 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
NF EN 50271 : 2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
CEI EN 61508-2 : 2011 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
ISO 22201-2:2013 | Lifts (elevators), escalators and moving walks Programmable electronic systems in safety related applications Part 2: Escalators and moving walks (PESSRAE) |
IEC 61784-3-8:2016 | Industrial communication networks - Profiles - Part 3-8: Functional safety fieldbuses - Additional specifications for CPF 8 |
IEC 61326-3-2:2017 RLV | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
EN 61784-3-12:2010 | Industrial communication networks - Profiles - Part 3-12: Functional safety fieldbuses - Additional specifications for CPF 12 |
ISO/IEC 16085:2006 | Systems and software engineering — Life cycle processes — Risk management |
IEC TS 62143:2002 | Electrical installations for lighting and beaconing of aerodromes - Aeronautical ground lighting systems - Guidelines for the development of a safety lifecycle methodology |
IEC TR 62685:2010 | Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
IEC 62138:2004 | Nuclear power plants - Instrumentation and control important for safety - Software aspects for computer-based systems performing category B or C functions |
IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
UNI EN 81-20 : 2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
IEC 60532:2010 | Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV |
DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
DIN EN 14143:2013-10 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
IEC 61784-3-6:2010 | Industrial communication networks - Profiles - Part 3-6: Functional safety fieldbuses - Additional specifications for CPF 6 |
BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
BS EN 81-22:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Electric lifts with inclined path |
UNE-EN 81-22:2014 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
IEC 60880:2006 | Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category A functions |
18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
IEC 61784-3:2016 RLV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
UNE-EN 81-2:2001 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. |
UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
CSA N290.14 : 2015 | QUALIFICATION OF DIGITAL HARDWARE AND SOFTWARE FOR USE IN INSTRUMENTATION AND CONTROL APPLICATIONS FOR NUCLEAR POWER PLANTS |
EEMUA 222 : 2009 | GUIDE TO THE APPLICATION OF IEC 61511 TO SAFETY INSTRUMENTED SYSTEMS IN THE UK PROCESS INDUSTRIES |
UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
UNI EN 14143 : 2013 | RESPIRATORY EQUIPMENT - SELF-CONTAINED RE-BREATHING DIVING APPARATUS |
UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
UNI EN 1012-3 : 2014 | COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
UNI EN 81-2 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
UNI EN 81-1 : 2010 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
IEC 61513:2011 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
I.S. EN 60880:2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
BS IEC 60092-504:2016 | Electrical installations in ships Automation, control and instrumentation |
BS IEC 61511-1 : 2003 AMD 15776 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
BS EN 60965:2016 | Nuclear power plants. Control rooms. Supplementary control room for reactor shutdown without access to the main control room |
API 554-1 : 2008(R2016) | PROCESS CONTROL SYSTEMS - PART 1: PROCESS CONTROL SYSTEMS FUNCTIONS AND FUNCTIONAL SPECIFICATION DEVELOPMENT |
BS EN 61508-2:2010 | Functional safety of electrical/electronic/ programmable electronic safety-related systems Requirements for electrical/electronic/ programmable electronic safety-related systems |
05/30143460 DC : DRAFT DEC 2005 | IEC 61508-3 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 3: SOFTWARE REQUIREMENTS |
BS EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for design, development and type approval of safety devices and subsystems |
BS EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) General. Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
BS EN 61508-7:2010 | Functional safety of electrical/electronic/ programmable electronic safety related systems Overview of techniques and measures |
BS PD ISO/TR 12489 : 2013 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RELIABILITY MODELLING AND CALCULATION OF SAFETY SYSTEMS |
CEI EN 62138 : 2011 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
UNI ISO 15998 : 2008 | EARTH-MOVING MACHINERY - MACHINE-CONTROL SYSTEMS (MCS) USING ELECTRONIC COMPONENTS - PERFORMANCE CRITERIA AND TESTS FOR FUNCTIONAL SAFETY |
ISO/TS 25238:2007 | Health informatics Classification of safety risks from health software |
BS EN 62551:2012 | Analysis techniques for dependability. Petri net techniques |
PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
BS EN 60601-1-4:1997 | Medical electrical equipment. General requirements for safety Collateral standard. General requirements for programmable electrical medical systems |
12/30268625 DC : 0 | BS IEC/PAS 62814/ED1 - DEPENDABILITY OF SOFTWARE PRODUCTS CONTAINING REUSABLE COMPONENTS - GUIDANCE FOR FUNCTIONALITY AND TESTS |
11/30229935 DC : 0 | BS EN 62671 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - SELECTION AND USE OF INDUSTRIAL DIGITAL DEVICES OF LIMITED FUNCTIONALITY |
OIML D 31 : 2008 | GENERAL REQUIREMENTS FOR SOFTWARE CONTROLLED MEASURING INSTRUMENTS |
BS ISO 17894:2005 | Ships and marine technology. Computer applications. General principles for the development and use of programmable electronic systems in marine applications |
BS IEC 61508-5 : 98 AMD 13783 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS |
03/313421 DC : DRAFT NOV 2003 | IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS |
14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
12/30247700 DC : 0 | BS EN 60079-29-3 IEC 60079-29-3 ED. 1.0 - EXPLOSIVE ATMOSPHERES - PART 29-3: GAS DETECTORS GUIDANCE ON FUNCTIONAL SAFETY OF FIXED GAS DETECTION SYSTEMS |
ISA 84.00.01-1 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
PD IEC/TR 63084:2017 | Nuclear power plants. Instrumentation and control important to safety. Platform qualification for systems important to safety |
ISA-TR106.00.01 : 2013 | PROCEDURE AUTOMATION FOR CONTINUOUS PROCESS OPERATIONS - MODELS AND TERMINOLOGY |
CEI EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENT FOR SYSTEMS |
10/30238943 DC : 0 | BS EN 61000-6-7 ED.1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-7: GENERIC STANDARDS - IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND EQUIPMENT INTENDED TO PERFORM FUNCTIONS IN A SAFETY-RELATED SYSTEM (FUNCTIONAL SAFETY) IN INDUSTRIAL ENVIRONMENTS |
BS IEC 61226 : 2009 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
07/30126760 DC : 0 | IEC 61559-1 - RADIATION PROTECTION INSTRUMENTATION - INSTRUMENTATION AND CONTROL OF NUCLEAR FACILITIES - PART 1: CENTRALIZED SYSTEM FOR CONTINUOUS MONITORING OF RADIATION AND/OR LEVELS OF RADIOACTIVITY |
08/30193474 DC : DRAFT NOV 2008 | BS EN 61508-5 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 5: EXAMPLES OF METHODS FOR THE DETERMINATION OF SAFETY INTEGRITY LEVELS |
BS EN 61784-3-6:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 6 |
BS IEC 60532:2010 | Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV |
04/30105027 DC : DRAFT JUNE 2004 | ISO 21789 - GAS TURBINES - SAFETY |
EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
14/30258869 DC : 0 | BS IEC 62765-1 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - MANAGEMENT OF AGEING OF SENSORS AND TRANSMITTERS - PART 1: PRESSURE TRANSMITTERS |
BS EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use. EMC requirements Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety). Industrial applications with specified electromagnetic environment |
PD ISO/IEC TR 24772:2013 | Information technology. Programming languages. Guidance to avoiding vulnerabilities in programming languages through language selection and use |
I.S. EN 50090-2-3:2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
02/645215 DC : DRAFT OCT 2002 | EN 50090-2-3:2002 - HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 2-3: SYSTEM OVERVIEW - GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN HBES |
BS EN 61800-5-2:2017 | Adjustable speed electrical power drive systems Safety requirements. Functional |
BS ISO 22201:2009 | Lifts (elevators). Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL) |
CEI EN 61784-3-1 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
API 554-3 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROJECT EXECUTION AND PROCESS CONTROL SYSTEM OWNERSHIP |
ISO 22201:2009 | Lifts (elevators) Design and development of programmable electronic systems in safety-related applications for lifts (PESSRAL) |
04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
UNE-EN 61000-6-7:2015 | Electromagnetic compatibility (EMC) - Part 6-7: Generic standards - Immunity requirements for equipment intended to perform functions in a safety-related system (functional safety) in industrial locations |
DD CEN/TS 15260:2006 | Health informatics. Classification of safety risks from health informatics products |
NF EN 60880 : 2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL SYSTEMS IMPORTANT TO SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
EN 61784-3-17:2017 | Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17 |
I.S. CEN TS 15260:2006 | HEALTH INFORMATICS - CLASSIFICATION OF SAFETY RISKS FROM HEALTH INFORMATICS PRODUCTS |
CSA C22.2 No. 60601.1.4 : 2002 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-4: GENERAL REQUIREMENTS FOR SAFETY - COLLATERAL STANDARD: PROGRAMMABLE ELECTRICAL MEDICAL SYSTEMS |
API 17O : 2014 | SUBSEA HIGH INTEGRITY PRESSURE PROTECTION SYSTEMS (HIPPS) |
EEMUA 191 : 2013 | ALARM SYSTEMS - GUIDE TO DESIGN, MANAGEMENT AND PROCUREMENT |
API 554-2 : 2008 : R2016 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
I.S. EN 61508-1:2010 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 1: GENERAL REQUIREMENTS |
I.S. EN 61784-3-18:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 |
I.S. EN 61784-3-1:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-1: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 1 |
I.S. EN IEC 62246-1-1:2018 | REED SWITCHES - PART 1-1: GENERIC SPECIFICATION - BLANK DETAIL SPECIFICATION |
IEEE/ISO/IEC 16085-2006 | ISO/IEC/IEEE International Standard - Systems and Software Engineering - Life Cycle Processes - Risk Management |
CEI EN 61784-3-18 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 |
CAN/CSA-IEC/TS 62443-1-1:17 | Industrial communication networks — Network and system security — Part 1-1: Terminology, concepts and models (Adopted IEC technical specification 62443-1-1:2009, first edition, 2009-07) |
I.S. EN 61226:2010 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - CLASSIFICATION OF INSTRUMENTATION AND CONTROL FUNCTIONS |
I.S. EN 61784-3-12:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-12: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 12 |
I.S. EN ISO 80079-37:2016 | EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'C', CONTROL OF IGNITION SOURCES 'B', LIQUID IMMERSION 'K' (ISO/DIS 80079-37:2014) |
SAE J2579_201303 | Standard for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles |
UNE-EN ISO 80079-37:2018 | Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' (ISO 80079-37:2016) |
BS EN 62808:2016 | Nuclear power plants. Instrumentation and control systems important to safety. Design and qualification of isolation devices |
BS EN 61500:2011 | Nuclear power plants. Instrumentation and control important to safety. Data communication in systems performing category A functions |
I.S. EN 50271:2010 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN - REQUIREMENTS AND TESTS FOR APPARATUS USING SOFTWARE AND/OR DIGITAL TECHNOLOGIES |
ISO 17894:2005 | Ships and marine technology — Computer applications — General principles for the development and use of programmable electronic systems in marine applications |
I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
IEC TS 62443-1-1:2009 | Industrial communication networks - Network and system security - Part 1-1: Terminology, concepts and models |
I.S. EN 61784-3-2:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-2: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 2 |
I.S. EN 61069-1:2016 | INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS |
I.S. EN 61784-3-13:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13 |
IEC 62855:2016 | Nuclear power plants - Electrical power systems - Electrical power systems analysis |
IEC 61326-3-1:2017 RLV | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
IEC 61784-3-2:2016 | Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
IEC 61800-5-2:2016 RLV | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
12/30228018 DC : 0 | BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
BS EN 13463-6:2005 | Non-electrical equipment for potentially explosive atmospheres Protection by control of ignition source \'b\' |
BS EN 81-1 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
UNE-EN 61508-6:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 |
BS EN 81-2 : 1998 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
IEC 60601-1-4:1996+AMD1:1999 CSV | Medical electrical equipment - Part 1-4: General requirements for safety - Collateral Standard: Programmable electrical medical systems |
IEC 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
IEC 61162-402:2005 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 402: Multiple talkers and multiple listeners - Ship systems interconnection - Documentation and test requirements |
IEC 62808:2015+AMD1:2018 CSV | Nuclear power plants - Instrumentation and control systems important to safety - Design and qualification of isolation devices |
BS EN 81-20:2014 | Safety rules for the construction and installation of lifts. Lifts for the transport of persons and goods Passenger and goods passenger lifts |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
ISO 18217:2015 | Safety of woodworking machines Edge-banding machines fed by chain(s) |
ISO 80079-37:2016 | Explosive atmospheres Part 37: Non-electrical equipment for explosive atmospheres Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k' |
IEC TR 63084:2017 | Nuclear power plants - Instrumentation and control important to safety - Platform qualification for systems important to safety |
BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
BS EN 14143:2013 | Respiratory equipment. Self-contained re-breathing diving apparatus |
BS EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment Requirements for application design and installation |
IEC 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
IEC 61226:2009 | Nuclear power plants - Instrumentation and control important to safety - Classification of instrumentation and control functions |
BS EN ISO 13849-1:2015 | Safety of machinery. Safety-related parts of control systems General principles for design |
UNE-EN ISO 13849-1:2016 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
12/30260546 DC : 0 | BS EN 50156-1 - ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 1: REQUIREMENTS FOR APPLICATION DESIGN AND INSTALLATION |
IEC 61165:2006 | Application of Markov techniques |
UNE-EN 14143:2014 | Respiratory equipment - Self-contained re-breathing diving apparatus |
EN 61511-1:2017/A1:2017 | FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND APPLICATION PROGRAMMING REQUIREMENTS |
DIN 56950:2005-04 | ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - SAFETY REQUIREMENTS AND TESTING |
EN 61500:2011 | Nuclear power plants - Instrumentation and control important to safety - Data communication in systems performing category A functions |
DIN EN 81-2:2010-08 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
EN 14143:2013 | Respiratory equipment - Self-contained re-breathing diving apparatus |
EN 81-2 : 1998 + A3 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS |
EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
EN 15233:2007 | Methodology for functional safety assessment of protective systems for potentially explosive atmospheres |
EN 81-1:1998+A3:2009 | Safety rules for the construction and installation of lifts - Part 1: Electric lifts |
EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
IEC 60965:2016 | Nuclear power plants - Control rooms - Supplementary control room for reactor shutdown without access to the main control room |
ISO/TR 12489:2013 | Petroleum, petrochemical and natural gas industries Reliability modelling and calculation of safety systems |
12/30264224 DC : 0 | BS EN 61511-1 ED.2 - FUNCTIONAL SAFETY - SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - NORMATIVE - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
14/30318354 DC : 0 | BS EN 61326-3-2 ED. 2 - ELECTRICAL EQUIPMENT FOR MEASUREMENT CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
UNE-EN 61508-3:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 3: Software requirements |
13/30294106 DC : 0 | BS EN 61784-3 ED 3.0 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS |
BS IEC 62855:2016 | Nuclear power plants. Electrical power systems. Electrical power systems analysis |
08/30193510 DC : DRAFT NOV 2008 | BS EN 61508-3 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 3: SOFTWARE REQUIREMENTS |
NF EN 50156-2 : 2016 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
UNE-EN 60300-3-4:2011 | Dependability management -- Part 3-4: Application guide - Guide to the specification of dependability requirements |
16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
ABS 0253 : 2016 | GUIDE FOR SOFTWARE SYSTEMS VERIFICATION ABS CYBERSAFETY[TM] VOLUME 4 |
DIN EN 15333-1:2008-04 | Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus |
I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
BS EN ISO 18217:2015 | Safety of woodworking machines. Edge-banding machines fed by chain(s) |
CSA ISO/IEC 14762 : 2010 | INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS IEC 61508-2 : 2000 AMD 13780 | FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
CAN/CSA-C22.2 NO. 61508-1:17 | Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 1: General requirements (Adopted IEC 61508-1:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 1 : Exigences générales (norme IEC 61508-1:2010 adoptée, deuxième édition, 2010-04, avec exigences propres au Canada) |
BS IEC 61831:1999 | On-line analyser systems. Guide to design and installation |
15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
14/30302089 DC : 0 | BS EN 61000-1-2 ED1 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 1-2: GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC SYSTEMS INCLUDING EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
BS ISO 22201-2:2013 | Lifts (elevators), escalators and moving walks. Programmable electronic systems in safety related applications Escalators and moving walks (PESSRAE) |
BS IEC 62138 : 2004 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT FOR SAFETY - SOFTWARE ASPECTS FOR COMPUTER-BASED SYSTEMS PERFORMING CATEGORY B OR C FUNCTIONS |
13/30273033 DC : 0 | BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS |
12/30243459 DC : 0 | BS ISO/IEC 80079-37 - EXPLOSIVE ATMOSPHERES - PART 37: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - NON-ELECTRICAL TYPE OF PROTECTION CONSTRUCTIONAL SAFETY 'CH', CONTROL OF IGNITION SOURCES 'BH', LIQUID IMMERSION 'KH' |
ISO 15998:2008 | Earth-moving machinery Machine-control systems (MCS) using electronic components Performance criteria and tests for functional safety |
16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
PD IEC/TS 61508-3-1:2016 | Functional safety of electrical/electronic/programmable electronic safety-related systems Software requirements. Reuse of pre-existing software elements to implement all or part of a safety function |
BS EN 62619:2017 | Secondary cells and batteries containing alkaline or other non-acid electrolytes. Safety requirements for secondary lithium cells and batteries, for use in industrial applications |
I.S. EN 50156-2:2015 | ELECTRICAL EQUIPMENT FOR FURNACES AND ANCILLARY EQUIPMENT - PART 2: REQUIREMENTS FOR DESIGN, DEVELOPMENT AND TYPE APPROVAL OF SAFETY DEVICES AND SUBSYSTEMS |
I.S. EN 81-22:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
04/30116216 DC : DRAFT JUL 2004 | IEC TR 61508-0 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS - PART 0: FUNCTIONAL SAFETY AND IEC 61508 |
07/30160564 DC : 0 | BS ISO/IEC 15288 - SYSTEMS AND SOFTWARE ENGINEERING - SOFTWARE LIFE CYCLE PROCESSES |
BS EN 61784-3-14:2010 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 14 |
07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
16/30323862 DC : 0 | BS ISO 22201-1 - LIFTS (ELEVATORS), ESCALATORS AND MOVING WALKS - PROGRAMMABLE ELECTRONIC SYSTEMS IN SAFETY RELATED APPLICATIONS - PART 1: LIFTS (ELEVATORS) (PESSRAL) |
BS EN 61784-3-3:2017 | Industrial communication networks. Profiles Functional safety fieldbuses. Additional specifications for CPF 3 |
BS EN 60300-3-4:2008 | Dependability management Application guide. Guide to the specification of dependability requirements |
PD IEC/TR 62096:2009 | Nuclear power plants. Instrumentation and control important to safety. Guidance for the decision on modernization |
UNE-EN ISO 18217:2016 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
05/30143456 DC : DRAFT DEC 2005 | IEC 61508-2 - FUNCTIONAL SAFETY OF ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY - PART 2: REQUIREMENTS FOR ELECTRICAL/ELECTRONIC/PROGRAMMABLE ELECTRONIC/PROGRAMMABLE ELECTRONIC SAFETY-RELATED SYSTEMS |
IEC 61784-3-17:2016 | Industrial communication networks - Profiles - Part 3-17: Functional safety fieldbuses - Additional specifications for CPF 17 |
I.S. EN 61500:2011 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - DATA COMMUNICATION IN SYSTEMS PERFORMING CATEGORY A FUNCTIONS |
ISO/IEC TR 24772:2013 | Information technology Programming languages Guidance to avoiding vulnerabilities in programming languages through language selection and use |
EN 61784-3-2:2017 | Industrial communication networks - Profiles - Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 |
API 554-2 : 2008 | PROCESS CONTROL SYSTEMS - PROCESS CONTROL SYSTEM DESIGN |
BS EN 62765-1:2017 | Nuclear powers plants. Instrumentation and control important to safety. Management of ageing of sensors and transmitters Pressure transmitters |
UNE-EN 61508-2:2011 | Functional safety of electrical/electronic/programmable electronic safety-related systems -- Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems |
I.S. EN 61131-6:2012 | PROGRAMMABLE CONTROLLERS - PART 6: FUNCTIONAL SAFETY (IEC 61131-6:2012 (EQV)) |
CEI EN 61784-3-13 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-13: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 13 |
I.S. EN 81-20:2014 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
I.S. EN 61557-15:2014 | ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS |
I.S. EN 60300-3-4:2008 | DEPENDABILITY MANAGEMENT - PART 3-4: APPLICATION GUIDE - GUIDE TO THE SPECIFICATION OF DEPENDABILITY REQUIREMENTS |
I.S. EN 50495:2010 | SAFETY DEVICES REQUIRED FOR THE SAFE FUNCTIONING OF EQUIPMENT WITH RESPECT TO EXPLOSION RISKS |
I.S. EN 61784-3-8:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-8: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 8 |
EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
CAN/CSA-C22.2 NO. 61508-2:17 | Functional safety of electrical/electronic/programmable electronic safety-related systems — Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (Adopted IEC 61508-2:2010, second edition, 2010-04, with Canadian deviations) | Sécurité fonctionnelle des systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité — Partie 2 : Exigences pour les systèmes électriques/électroniques/électroniques programmables relatifs à la sécurité (norme IEC 61508-2:2010 adoptee, deuxième édition, 2010-04, avec exigences propres au Canada) |
IEC TR 61508-0:2005 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508) |
I.S. EN 61513:2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS (IEC 61513:2011 (EQV)) |
DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
NF EN 61513 : 2013 | NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - GENERAL REQUIREMENTS FOR SYSTEMS |
I.S. EN 61784-3-14:2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-14: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 14 |
UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
ABS 0251 : 2016 | CYBERSECURITY IMPLEMENTATION FOR THE MARINE AND OFFSHORE INDUSTRIES - CYBERSAFETY[TM] VOLUME 2 |
PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
I.S. EN 61800-5-2:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL |
I.S. ENV 14459:2003 | METHOD OF RISK ANALYSIS AND RECOMMENDATIONS FOR THE USE OF ELECTRONICS IN SYSTEMS FOR THE CONTROL OF GAS BURNERS AND GAS BURNING APPLIANCES |
IEC 62765-1:2015 | Nuclear powers plants - Instrumentation and control important to safety - Management of ageing of sensors and transmitters - Part 1: Pressure transmitters |
IEC 61784-3-13:2016 | Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13 |
EN 61784-3-18:2011/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3-18: FUNCTIONAL SAFETY FIELDBUSES - ADDITIONAL SPECIFICATIONS FOR CPF 18 (IEC 61784-3-18:2011/A1:2016) |
EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
EN 61784-3-13:2017 | Industrial communication networks - Profiles - Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13 |
DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
DIN EN ISO 13849-1:2016-06 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
DIN EN 81-22:2014-12 | Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path |
IEC 62551:2012 | Analysis techniques for dependability - Petri net techniques |
IEC 61784-3-14:2010 | Industrial communication networks - Profiles - Part 3-14: Functional safety fieldbuses - Additional specifications for CPF 14 |
IEC 61784-3:2016+AMD1:2017 CSV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
BS EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels. Control functions in electronic systems. Methods for classification and assessment |
BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
10/30216944 DC : 0 | BS EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC LIFTS WITH INCLINED PATH |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
IEC 61784-3-1:2010 | Industrial communication networks - Profiles - Part 3-1: Functional safety fieldbuses - Additional specifications for CPF 1 |
BS EN 61557-15:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems |
EN 1012-3:2013 | Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors |
EN 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels |
EN 62551 : 2012 | ANALYSIS TECHNIQUES FOR DEPENDABILITY - PETRI NET TECHNIQUES (IEC 62551:2012) |
EN 61513:2013 | Nuclear power plants - Instrumentation and control important to safety - General requirements for systems |
EN 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
EN 61069-1:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts |
I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
EN 14459:2015 | Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment |
EN 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures |
EN 50156-1:2015 | Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for application design and installation |
EN 50156-2:2015 | Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for design, development and type approval of safety devices and subsystems |
EN 61000-1-2:2016 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
DIN EN 81-1:2010-06 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
DIN EN 81-1:2000-05 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS |
DIN EN 81-20:2014-11 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 20: PASSENGER AND GOODS PASSENGER LIFTS |
EN 50270:2015 | Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements |
EN 61165:2006 | Application of Markov techniques |
EN 50090-2-3:2005 | Home and Building Electronic Systems (HBES) - Part 2-3: System overview - General functional safety requirements for products intended to be integrated in HBES |
EN 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
IEC 61326-3-2:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
UNE-HD 60364-5-557:2014 | Low-voltage electrical installations - Part 5-557: Selection and erection of electrical equipment - Auxiliary circuits |
CEI EN IEC 62061:2023 | Safety of machinery - Functional safety of safety-related control systems |
ISA TR91.00.02 : 2003 | CRITICALITY CLASSIFICATION GUIDELINE FOR INSTRUMENTATION |
ISA 99.00.01 : 2007 | SECURITY FOR INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS - PART 1: TERMINOLOGY, CONCEPTS, AND MODELS |
ANSI/A3 R15.08-2:2023 | Industrial Mobile Robots - Safety Requirements - Part 2: Requirements For IMR System(S) And IMR Application(S) |
IEC 60050-351:2013 | International Electrotechnical Vocabulary (IEV) - Part 351: Control technology |
ISO/IEC 2382-1:1993 | Information technology Vocabulary Part 1: Fundamental terms |
IEC 61131-3:2013 | Programmable controllers - Part 3: Programming languages |
SA TS 19883:2020 | Safety of pressure swing adsorption systems for hydrogen separation and purification (ISO/TS 19883:2017, MOD) |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
IEC 61508-3:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
AS/NZS IEC 61703:2020 | Mathematical expressions for reliability, availability, maintainability and maintenance support terms |
AS/NZS IEC 31010:2020 | Risk management - Risk assessment techniques |
ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
IEC 61508-6:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3 (see Functional Safety and IEC 61508) |
AS/NZS IEC 60812:2020 | Failure modes and effects analysis (FMEA and FMECA) |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
IEC TR 62059-11:2002 | Electricity metering equipment - Dependability - Part 11: General concepts |
IEC 61508-7:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures (see Functional Safety and IEC 61508) |
IEC 61508-2:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems (see Functional Safety and IEC 61508) |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
AS ISO/IEC/IEEE 12207:2019 | Systems and software engineering - Software life cycle processes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.