SAE AMS2810G
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Identification and Packaging Elastomeric Products
07-01-2018
30-12-2008
DocumentType |
Standard
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This specification provides requirements for the identification and packaging of sheet, strip, extrusions, and molded parts made of natural rubber, synthetic rubber, reclaimed rubber, and combinations of the above with other materials such as asbestos, cork, and fabrics. AMS2817 covers preferred requirements for identification and packaging of preformed packings.
SAE AMS3315G | Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced |
SAE AIR1412D | Designing for Long Life with Elastomers |
SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
SAE AMS3209M | Chloroprene (CR) Rubber Weather Resistant 65 - 75 |
SAE AMS3331C | Elastomer: Fluorosilicone Rubber (FVMQ) Fuel and Oil Resistant 65 – 75 Shore A Hardness For Products in Fuel Systems/Lubricating Oils |
SAE AMS3357G | RUBBER, SILICONE (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75 |
SAE AMS3217A | Standard Elastomer Stocks Test Slabs |
SAE AMS3218D | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 to 95 |
SAE AMS3227H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 |
SAE AMS3216H | Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 to 80 |
SAE AMS3337F | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 65 - 75 |
SAE AMS3304H | Silicone, Rubber General Purpose 70 Durometer |
SAE AMS3199L | Sponge, Chloroprene (CR) Rubber Firm |
SAE AMS 3193F : 2014(S2019) | SILICONE RUBBER SPONGE CLOSED CELL, MEDIUM, EXTREME LOW TEMPERATURE |
SAE AMS3217/1B | Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75 |
SAE AMS3334F | Silicone Rubber Extreme Low-Temperature Resistant 35 - 45 |
SAE AMS3274H | Acrylonitrile Butadiene (NBR) Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant |
SAE AMS3323A | Sponge, Fluorosilicone (FVM) Rubber Closed Cell |
SAE AMS3348D | Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35 |
SAE AMS3384 | Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems |
SAE AS7283B | Gaskets, Type XX Engine Accessory Drive Corrosion Resistant Steel Screen Reinforced Controlled Performance |
SAE AMS3301H | Silicone, Rubber General Purpose 40 Durometer |
SAE AMS3325F | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 55 – 65 |
SAE AMS3349D | Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 |
SAE AMS3210H | Chloroprene (CR) Rubber Electrical Resistant 65 - 75 |
SAE AMS3196G | Sponge, Silicone Rubber Closed Cell, Firm |
SAE AMS3197M | Sponge, Chloroprene (CR) Rubber Soft |
SAE AMS3305J | Silicone, Rubber General Purpose 80 Durometer |
SAE AMS3270K | Chloroprene (CR) Rubber Sheet, Cotton Fabric Reinforced Weather Resistant |
SAE AMS3338G | Silicone (PVMQ) Rubber Extreme-Low-Temperature Resistant 75 - 85 |
SAE AMS3238H | Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 |
SAE AMS3226H | Acrylonitrile Butadiene (NBR) Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55 |
SAE AMS3250K | Synthetic Rubber and Cork Composition General Purpose Soft |
SAE AMS3208N | Chloroprene (CR) Rubber Weather Resistant 45 - 55 |
SAE AMS3345F | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer |
SAE AMS3251J | Synthetic Rubber and Cork Composition General Purpose Medium |
SAE AMS3212P | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 55 - 65 |
SAE AMS3329C | ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45 – 55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS / LUBRICATING OILS |
SAE AMS3347C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 – 55 |
SAE AMS3205M | Synthetic Rubber Low-Temperature Resistant 45 - 55 |
SAE AMS3306C | Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 55 - 65 |
SAE AMS3346G | Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer |
SAE AMS3198L | Sponge, Chloroprene (CR) Rubber Medium Stiffness |
SAE AMS3328C | Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35 – 45 |
SAE AMS3310 | Rubber, Silicone Flame Retardant, Low Smoke Density, High Strength 65 - 75 Durometer Color White |
SAE AMS3213M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 |
SAE AMS3330C | Elastomer: Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 – 55 For Products in Fuel Systems/Lubricating Oils |
SAE AMS3194E | Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature |
SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
SAE AMS3215M | Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 |
SAE AMS3237F | Butyl (IIR) Rubber Phosphate Ester Resistant 35 - 45 |
SAE AMS3229J | Acrylonitrile Butadiene (NBR) Rubber Hot Oil Resistant, Low Swell 75 - 85 |
SAE AMS3356F | Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65 |
SAE AMS3207N | Chloroprene (CR) Rubber Weather Resistant 25 - 35 |
SAE AMS3382D | Elastomer: Tetrafluoroethylene/Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.